I have this problem.



1. I want to use this layout, but in my stack #0 where I put all tables when tables pop up , pop up wrong another tables pop up and really I do a lot missclcikc bc this .


2. I have this settings.



And not have any put in ACR with switch tables , what will be you setting recomendation to this?

Im going to send you my logs , but I have sened you my logs before , but nothign change after solution you give me.

The update is out now.

It seems like some people are having issues with WPN tables popping up out of order. I will investigate.

Well after doing a few hours of trouble shooting. I stacked 24 tables of cash tables on top of each other im not playing or interacting with the windows at all. It bugs out every 30 seconds exactly. Does table tamer check for something every 30 seconds? My initial thought it might be checking the bottom of the stack or an old table and it was going thru the bottom table and seeing my blue wallpaper. I changed to a different one and the problem persists. Hope this helps in someway. If no table is focused at all. The problem doesnt happen.

ya idk u probably know what it is because how many things could possibly happen every 30 seconds but a small 3 table test, it takes 1 minute for it to happen after starting, every 30 seconds table pops up with no action. If I cycle between 2 tables, the 3rd table pops up after 30 seconds. If I continuously cycle nothing happens.

Please try disabling Settings/Automation/Click Info Tab, and let me know if that fixes it.

That seems to have fixed it, itll get a real test when i play a real session but im pretty optimistic.

Thanks for letting me know. Please let me know how your next session goes.

Hi, is $>BB currently supported for Titan poker (ipoker skin)?
Afaik it has different (newer) client version than other skins and conversion does not work for me. Set as "IPokerNewClient" in site settings.

yup worked well.

I still seem to have a "client performed an illegal action" crash every session but thats not tabletamer exclusive. Its a shot in the dark but would you know why thats happening. I can recreate a similar crash multiple ways. I dont know the exact terminology but is there some kind of max "total resolution" of all wpn windows combined. It might not be an exact number but going above a certain number increases the chances of a crash. Ie I can open 24 tables and resize them to 1019x762. If I go to 1044x780 and try to resize all tables I crash ~95% of the time. If I size a table twice that size and open 13 of those tables I crash.

+1

We are working on an update for the newer IPoker clients. For now, we only have basic compatibility (tiling and some hotkeys). It is explained in the setup guide. We will first be restoring betting functionality, player panels, and table status detection. That should hopefully be done this week. Then, we will add support for $ to BB again.
https://tabletamer.com/joomla/index....w-client-setup

Are you running any jackpot or sng 2.0? I have heard that sometimes resizing them with TT can cause a crash. I think turning off the Settings/Hud/Misc/Attach option would fix that.

ACR is freezing and crashing on me like once an hour when I have TT going.

Hi there i have few questions. When i started TT, it has an update it ask to download. So always download the new update? When i did download it, it shows up as setup table tamer 1.2.4.7 but when i click it, it says


windows protected your pc


windows defender smartscreen prevented an unrecognized app from starting. Running this app might put your pc at risk


Do i click more info and then just run anyway? Thus every update you do, you have to do this?



So when im playing say 12 or more tables, i get a horrible lag where the tables freezes. Then after a bit it doesn't freeze. But i notice this only happens when i have say 12 or more tables going. Also many times my TT will go crazy where say my hotkey of the letter t is say 60% pot. Well if the pot is say 1000 chips, it should bet 600. Instead it would show like 800 or some big number. Im talking about when i have the bet size percentages shown on the screen like this.... 30% 40% 50% 60% 80% etc. So when i click on 60%, it would show like 78 percent pot size. But after a bit, it will fix itself. Does anyone here have these issues? It happens several times when im playing. But after a bit, it would fix itself.


The other thing is i mentioned i tile tables where there is 4 tables with no overlap on a 24' 1920x1200 screen. The thing is the first table that loads up at the start of every session, this table is huge. Its a big table where i have to manually make it smaller. Once i make it the right size then i move it to one of the 4 quadrants of the table. Then as new tables open, they go to different quadrants which is what i like. Thus just move it a little bit and then it moves to any quadrant. But how do i not allow resizing of tables? Because many times when i move tables, i would get a table bigger or smaller size and have to manually resize it back... then move it to a quadrant.


However i want to make sure i get the 1st table to load correct size because my settings seem to be good so i don't want to mess it up. Thus if it loads correct size, then i want to make sure any new tables that open, it cannot get resized. Also many times some tables would get maximized so big where it covers the whole screen. Then my computer lags so i wait a while, then i move that table a bit and then it automatically goes back to its regular size. Is this a glitch or something with my settings?


Also a few times already and it happens in every session, the tables freeze where i have to close the tables because it shows some unexpected error and i have to close wpn. Then open it again and log back in. Is this very common for ppl? The thing is this happens everytime i play because im playing at least 12 tables usually. But whenever i played a few tables, this never happened. My laptop is a quad core laptop with ssd and 8gb ram so i dont think that is the issue.


Thanks.

yes, im mixing jackpots and regular sngs. No major issues for the first time in a week, not a great test becuase my peak tables was sub 20 but once again im hopeful.

Minor issues, I press my 3xbb raise hotkey in a jackpot it enters the best into the bet box but then minraises. If I type a bet on anytable and use enter to send the bet my next tables will not pop up and I have to cycle to them.

Earlier today I had an omaha table open. My pokertracker gets import errors since I dont have an omaha key. Could this have effected the "Actions" panel item. The first hand would work fine but then it would not update or would show information from either old hands or just complete nonsense. It then also caused tabeltamer to freeze when I tried to turn it off and I would have to kill the process. This problem repeated itself several times.

A 3rd major maybe unrelated issue. I think this is just an absurd coincidence. My pokertracker hud would not work on jackpots today for the first time ever? I had so many issues with my first session today that I thought it must be related but after 4 hours of testing uninstalling reinstalling different computers messing with pokertracker I think wpn must have changed something overnight most likely in an attempt to drive me insane.

It seems that the HUD table panel with the pot odds item cannot run simultaneously with neither Holdem Indicator or PT4. Running one program first causes the other program to not work. Table tamer is working fine otherwise. Is there anyway to for them to work simultaneously, I would like to know my pot odds in real time as I'm playing and be able to run my HUD software at the same time.

Hey Poke,

so I played 10 hrs. of cash, 1 table and TT worked amazingly. Sizing PF, sizing for 3B, OOP and IP, auto-sizing on F, T and R's. Even the timer was working. The details for every player including name, position, actions worked the whole time.

MTT's however, did not. I would guess it actually did what it was supposed to less than 5% of the time. The complete opposite of the cash session. I played about 7 hours of MTT's.

I pretty much had the cash table up from the morning and throughout the day and night, I'd mix in an MTT or two. At least for MTT's, TT would auto-size pre and post sometimes, but now, it's gotten way more inconsistent. It hardly works now compared to a few days ago. I'm pretty sure if I played one cash or MTT at a time, there wouldn't be issues.

Auto-sit in still not working, stack to BB as well.

Try this.
1) Turn off WPN and TT.
2) Open TT.
3) Go to Settings/Site Setup, and hit Allow Updates.
4) Start WPN and let it update.
5) Go to Settings/Site Setup, and hit Configure WPN and Block Updates.
6) Restart WPN.

Please let me know if that solves it. If it doesn't, click the ? in the main window and hit Send Logs. Please reference the post on 2+2 so I know what it is about.

.

I think this is unrelated to TT. Try testing with and without TT running.

I think this is a bug that we have been working on solving. I have been waiting for more feedback from other users to release the fix though. Try this out.
1) Download http://tabletamer.com/download/BovadaAttach.dll.
2) Copy it to the TT folder (C:\Program Files (x86)\Table Tamer) and overwrite the existing one.
Please let me know if that solves your issue. I would appreciate it.

What site is this? If this ignition/bodog/bovada, refer to my post above this. Stack to BB doesn't work on that site by the way.

I set my raise hotkey to "numpad add" so I could hit that instead of "numpad enter" to get my bets to work and tables to keep popping up then I realized I was dumb and should just set it to enter. So that obviously works. I played a few more crash free sessions, finally i feel like I can play and not have to worry about software issues(knock on wood). The other issues are probably pretty niche and minor. Thanks for all the help, im planning to sub for a long time.

"destination folder access denied"
you need permission to perform this action.

trying to test this but can't. already logged in as admin.