I plan to add it at some point. I can't be sure how long it will take though. I'm sure some people are adding it as a custom site just for layout purposes and table under mouse.

Hello, i've bought a new monitor and trying to make a new layout (tables slot destination), but when i try to make a new destination it doesnt save it and put it to random places at the monitor (screensho attached). Also when i try to input slot numbers manually appears the random numbers that i didnt type and they make the slots to move out from the monitor. Can you help me to improve it?

https://gyazo.com/1c0c5f9e767c9872a59aee64a19ed34b

Upd. Fixed, the problem was not with TT. That happened because of enabled scaling.

Do betting configurations works on chico?
I tried to set up many times with no results .
Thanks

Yes. They work fine, but you might need to update to the latest version of TT. There is also a setup guide to read.
https://tabletamer.com/joomla/index....etonline-setup

Is chico crashing on start up for anyone?

RE Global Poker

Thanks for the info, I subbed again and got it working.

I couldn’t get autotimebank working. Tried different table layouts and nothing, any other suggestions would be greatly appreciated.

Will I be able to set a hotkey to raise xbb on this site? I could only get it to minraise.

I’d like to have the bet box clear and send number pad to it for the table under mouse. So far I’ve tried:

-Settings>betting>config>[x]send number pad to bet box

-When it is my turn [x] clear bet box and set focus to it

-settings>betting>hotkeys>focus and clear bet box hotkey

Thank you very much

hi! I've been having a problem with Tabletamer, since (at least) version 1.1.7.9 until 1.2.1.9
When playing at microgaming and multitabling over 4 tables after a while, (1hour sometimes less) all the tables freeze.
At first i thought the problem was from microgaming software but recently i found it's from tabletamer, and if i kill tabletamer task when all the tables resume.
I stoped paying for this software but it really usefull and i'd like to use it again. can you find this bug and sort it out?

If I keep the tables at their default sizes, will the layout work then (and not resize them)? Or is there a particular size which, when used with a TT layout, will work ideally with no weird resizing?

I'm having trouble with WPN's new registered tables popping up in the last tables slot. I'm sure there's a way to stop this from happening but I am not sure. I see there's a New Table Destination in the Layout section, which I have set as Ignore. Hoping that would worked, no bueno. Any help would be much appreciated. Thanks!

Did this resolve itself? Are you on the latest version? What skin are you on?

I can't guarantee any of this will work, but here are my suggestions.

For the timebank to work, you have to be sure the table changes status properly like in this guide.
https://tabletamer.com/joomla/index....was-successful
Then, you need to add a region for the time bank. The name doesn't matter, but set the region type to TimeBank. You will need to add a color like you did with fold to have tt recognize the timebank.

For the other functions, you have to add a region named BetBox and place it over the bet box. Also, in Settings/Advanced, you would need to try changing the Send Bet Type to Fakeinputnocheck.

There is an option in Settings/Layout called Don't Resize Tables. You can use that with the default size and avoid the problem.

If I create a layout and use window spy to copy the height and width, I am not having much of a resizing problem. It seems to fit the slot like expected, but there is a slight jiggle when it resizes.

Please click the ? in the main window and hit send logs so I can check your settings.

Sent

I sent a possible solution in response to your PM. Please let me know if that solves your issue.

I will look into fixing it. Can you PM me the skin you play on? I haven't heard similar complaints though. Try disabling your antivirus during a session. If that works, you can add exclusions in your antivirus software for the TT and microgaming folders.

Thank you for the response. I have not been able to get the status change on this site, it’s on “none” at all times. I’ve seen it display nothing at all but I think that’s only when I have 1 table up. I added a region for the timebank as well as the BetBox and now the “focus and clear BetBox” hot key works. It’d be nice to have it do that automatically but I’m ok with using the hotkey if it’s not possible on this site.

I’m not sure if you responded to the bolded and maybe I misunderstood or missed it. I’d like raise to a certain sizing using a hotkey preflop if possible.

In Settings/Site Setup/Global/Edit Site/General, change the scan type to printwindow2. Some sites need different scan types for tt to recognize the action.

To use the bet x bb preflop hotkey, you need to allow TT to get the big blind size. Also, this may not work with this site.

Read the section called 'Configuring RegEx to get info about the table' in this guide.
https://tabletamer.com/joomla/index....-a-custom-site
In Settings/Site Setup/Global/Edit Site/Advanced, change the send bet type to fakeinputnocheck.

I plan on adding support for this site, but I can't give a good estimate of when it will be done.

Ok, I just updated from 1.2.1.0 to 1.2.1.9.

I just made a layout (for Ignition) which seemed to go well when setting up, but when activated it keeps making the tables small. I'm using "Fill" layout mode, "remove title bar," and I tried it with and without "don't resize tables" checked, and with and w/o "table height scaling" checked, and it does the same thing in all situations.

Then I made one with "remove title bar" unchecked, and after some initial problems, it seems to be working.

A couple other issues I've been having, which may or may not be better now that I've updated (I'll be testing as I'm writing this FYI):

- Autoreg for mtt/sng doesn't always work - it seems to work about 2/3 or 3/4 of the time, and get stuck on the small popup window with the red Register button the rest of the time.

- When more than one table is urgent, after I act on the first/foremost urgent table, it does not cycle to the next urgent table.


Okay, right away, after this TT update, urgent tables are not popping forward/stealing focus from other apps, which WAS working prior to updating.

I just uncheckd Disable Pop to Front in the Ign settings and now they are popping up, but from past experience and your past advice, this may create other problems.

Please help/advice on the above.

Hello Dear Table Tamer support !

I've got a trouble with buying your soft! I've payed (Subscribe) and money went out from my credit card but I still didnt get my Table Tamer soft. I've payed it from Ukraine with mastercard wich starts from 5168 and ends 7448. Idk what I've to do,It would be very nice if you answer me as fast it possible ! Thanks

I changed the scan type and send bet type. It looks like the bet box method should be possible Bc I was able to find the logs and found a matching control and set it. When I tried to configure the bet box method I was unable. Now when I go into site layout editor I’m able to find the table but when I click refresh nothing happens. Also one of these changes I’ve made has stopped the “set focus and clear bet box” hotkey from working. Any help would be greatly appreciated.

Thank you

It did yeah.

i followed the guide but is still not working, also the hotkey option don't remain unmark. what else can i do?

https://gyazo.com/9168e95345afbb226a78382da3c5a1e0
Is this correct? I play in bb's btw, just in case there is a conflict.
Thanks

Chico is crashing after update.