Open Side Menu Go to the Top
Register
[WARNING - multiple reports of bugs] Table Tamer [WARNING - multiple reports of bugs] Table Tamer

07-10-2017 , 09:33 AM
Betonline keeps freezing did they have an update today?
[WARNING - multiple reports of bugs] Table Tamer Quote
07-10-2017 , 10:31 AM
newbie using it on WPN here. Did the basic set up and the problem I'm having is when minimising a table it pops instantly back up. horrible for showdown watch avoidance LOLZ

quick search shows u say settings/misc. there is no misc that I can see...

Last edited by Top Pig; 07-10-2017 at 10:38 AM.
[WARNING - multiple reports of bugs] Table Tamer Quote
07-10-2017 , 12:31 PM
Also, I don't have any focus types set, when table is urgent do nothing, focus type= none, but yet focus goes utterly spazzed when a bunch of tables all need action. I can't look at lobby without tables flying up left right and centre, and when action table does pop up, it's never focused on my mouse, I have to click on the table first before hotkey will operate, from one table to the next. yes both clients run as admin.
[WARNING - multiple reports of bugs] Table Tamer Quote
07-10-2017 , 07:13 PM
OK ignore all of that, think I've figured it now. Would never have happened if I hadn't posted tho, that's always the guaranteed way.

ok so u can set it to allow minimising tables but if u do then it won't pop back up when action's required??

Last edited by Top Pig; 07-10-2017 at 07:28 PM.
[WARNING - multiple reports of bugs] Table Tamer Quote
07-11-2017 , 02:09 AM
Quote:
Originally Posted by shaymalus
Hello,
There is a problem occuring which actually has cost me a lot of money because it's causing me to bet/raise on the wrong table! I just got stacked in a hand because table tamer caused me to 4bet on the wrong table.

I run 5 slots, 1 of which is the main stack.

This is when the problem occurs:
Sometimes when there is an action pending on more than 1 table in the stack, i will click the fold/call/raise button on the table which is appearing at the top of the stack. As soon as I click, one of the tables underneath will momentarily flash to the top of the stack and receive the click instead.

It only happens occasionally. I can ensure it doesnt happen by clicking anywhere on the topmost table to ensure that the focus is on this table.

Any advice on how to prevent this from happening?
Thanks!


I still have this problem too. I run 6x slots and if more than one table requires action, additional tables mirrors the action on the table I intend to take action on. This only happens when using the hotkeys. I have checked my settings over and over, but I have yet to resolve this issue...
[WARNING - multiple reports of bugs] Table Tamer Quote
07-11-2017 , 10:53 AM
I'm having an issue on WPN whereby I need to click buttons twice for anything to happen when a table pops up. If tables are popping up in quick succession I can usually hotkey fold them all fine first button press, but once there's been a few seconds with no action then a table pops up from one of 4 stacking quadrants, then I need to either click the table with mouse, click the hotkey that goes to next action table, scroll table hotkey, or the hotkey fold or raise (whichever it is I want to do) before being able to action the table. I've tried stealing focus from other apps and so on. I'm sure switching focus type to table under mouse would work but I don't want to use that option...

Another question, the set up recommends switching off "auto switch between tables" in the ACR settings. Why is this?
[WARNING - multiple reports of bugs] Table Tamer Quote
07-11-2017 , 01:09 PM
Quote:
Originally Posted by leviathan74
I am afraid I have to report some more problems. For a long time now I have been using TT version 1.1.5. Because of the betting problems with the new PS client, I upgraded to 1.1.8.1 in hopes of fixing that, but as we know now the solution lied in jingling with the site setup.

Yesterday, I played for 8 hours on PS and 888 and I encountered the following issues:

1. On both 888 and PS, the automatically sit me back in option wasn't working. Today, i reverted back to TT version 1.1.5 and tested it on a couple of play money tables. Auto sit me back in worked as it should on both sites. So, that looks to me like a confirmed post-1.1.5 version problem.

2. I am using a timer that appears on the top center of the table so as not to give any timing tells. For some reason, on some tables, the timer started appearing on various parts of the upper left screen. Even though I moved it back to top center on numerous tables, on some tables it kept appearing on the top left corner on some tables with no rhyme or reason I could discern.

3. Out of the blue, 888 crashed on me 3 times. The first time, windows gave me a message, the others, it just vanished from the screen and I had to restart it.

With problems #2 and #3 I can't say for certain if they were caused by the newer TT version or by a newer 888 client version I was forced to install last week. My suspicion is that TT is the likeliest culprit, but I cannot say with certainty. I will update this post once I get another couple of sessions in and see if I encounter those problems again.

I think I ll be fine with 1.1.5 so this isn't urgent on my part. But you should take a look into it for the sake of program.
To follow up on my previous report, I played on Sunday for 9 hours using version 1.1.5; I did not encounter any issue with the timer, but 888 client crashed out of the blue once.
[WARNING - multiple reports of bugs] Table Tamer Quote
07-11-2017 , 11:52 PM
Quote:
Originally Posted by p2 dog, p2
basically in test mode since it's been awhile since utilizing your program

deleted and setup WPN JP/SNG 2.0. I tested it and it correctly setup. Borders were switching b/w urgent/none/advanced

In game though my allin HK (ctrl+"up arrrow") worked once with TUM and then did not work sometimes as well. My "cycle to urgent" hotkey seemed to do the same. it seemed inconsistent, it would cycle properly once or twice but then would not do so in the future. I know there is some limited use with SNG 2.0/JP but the inconsistency is weird.
Quote:
Originally Posted by p2 dog, p2
getting the continuously spinning circle when trying to stop TT again
What you are saying sounds like some component of TT stopped working. You can send me logs and I will look for any problems, but I think your antivirus might be causing issues. Try adding exclusions for TT and WPN.
[WARNING - multiple reports of bugs] Table Tamer Quote
07-11-2017 , 11:56 PM
Quote:
Originally Posted by thatrug
I've installed Table Tamer for the first time, and want to use it with bet365.
After making some initial settings (and changed both bet365 and TT to run as an administrator), I started to test it with the poker client, but the second I click the "play" (Start) button on the main panel of TT, bet365 instantly crashes.

The error message doesn't say anything specific, just that bet365 stopped working, and Windows are looking for a solution for this problem (I use Windows 7).

Can anyone help me what I could do to solve this? Sent an email to tabletamer@tabletamer.com few days ago as well, but didn't get any reply so far.
Thanks.
I tried running TT with bet365 and didn't have a crash. Can you try adding exclusions for TT and IPoker to your antivirus and let me know if it still crashes?
[WARNING - multiple reports of bugs] Table Tamer Quote
07-11-2017 , 11:57 PM
Quote:
Originally Posted by Mckittrick19
Betonline keeps freezing did they have an update today?
If they put out an update, it would just crash as soon as you opened a table. Did the freezing stop?
[WARNING - multiple reports of bugs] Table Tamer Quote
07-11-2017 , 11:58 PM
Quote:
Originally Posted by Top Pig
OK ignore all of that, think I've figured it now. Would never have happened if I hadn't posted tho, that's always the guaranteed way.

ok so u can set it to allow minimising tables but if u do then it won't pop back up when action's required??
Exactly. If you are using a layout, you could make a slot where you won't see it, just off the side of the screen. Then, use a hotkey to put the table there to hide it.
[WARNING - multiple reports of bugs] Table Tamer Quote
07-12-2017 , 12:04 AM
Quote:
Originally Posted by Sev Mile Dogg
I still have this problem too. I run 6x slots and if more than one table requires action, additional tables mirrors the action on the table I intend to take action on. This only happens when using the hotkeys. I have checked my settings over and over, but I have yet to resolve this issue...
That doesn't sound like the same issue. Pressing the hotkey causes multiple tables to take the same action? What site is this and what focus type do you use? You should upgrade to the latest beta.
[WARNING - multiple reports of bugs] Table Tamer Quote
07-12-2017 , 12:14 AM
Quote:
Originally Posted by Top Pig
I'm having an issue on WPN whereby I need to click buttons twice for anything to happen when a table pops up. If tables are popping up in quick succession I can usually hotkey fold them all fine first button press, but once there's been a few seconds with no action then a table pops up from one of 4 stacking quadrants, then I need to either click the table with mouse, click the hotkey that goes to next action table, scroll table hotkey, or the hotkey fold or raise (whichever it is I want to do) before being able to action the table. I've tried stealing focus from other apps and so on. I'm sure switching focus type to table under mouse would work but I don't want to use that option...

It sounds like you might have 'Settings/Action and Focus/Only cycle to urgent after hero acts' turned on. If that's not the case, I will have to run some tests.

Another question, the set up recommends switching off "auto switch between tables" in the ACR settings. Why is this?
In most cases, you should let TT handle the focus setting. In order for it to work properly, TT should not have any other programs setting focus. So that needs to be off.
[WARNING - multiple reports of bugs] Table Tamer Quote
07-12-2017 , 12:15 AM
Quote:
Originally Posted by leviathan74
To follow up on my previous report, I played on Sunday for 9 hours using version 1.1.5; I did not encounter any issue with the timer, but 888 client crashed out of the blue once.
Did you add exclusions?
[WARNING - multiple reports of bugs] Table Tamer Quote
07-12-2017 , 05:48 AM
Quote:
Originally Posted by pokecancer
I tried running TT with bet365 and didn't have a crash. Can you try adding exclusions for TT and IPoker to your antivirus and let me know if it still crashes?
I added exclusions for both TT and bet365 in the firewall (at least I hope I did it right), but it still crashes instantly.
[WARNING - multiple reports of bugs] Table Tamer Quote
07-12-2017 , 06:27 AM
are there any plans for adding an autoregging option to partypoker SNGs in the near future ?
[WARNING - multiple reports of bugs] Table Tamer Quote
07-12-2017 , 01:26 PM
I use McAfee Total Protection, I have searched and searched on how to add exclusions, I am not sure I have correctly done it. Are you familiar with how to do this with McAfee Total Protection?
[WARNING - multiple reports of bugs] Table Tamer Quote
07-12-2017 , 10:50 PM
Quote:
Originally Posted by thatrug
I added exclusions for both TT and bet365 in the firewall (at least I hope I did it right), but it still crashes instantly.
Okay, I was going to have my programmer make some changes to the IPoker support anyways, and I will make sure he addresses this issue.
[WARNING - multiple reports of bugs] Table Tamer Quote
07-12-2017 , 10:51 PM
Quote:
Originally Posted by d0zer
are there any plans for adding an autoregging option to partypoker SNGs in the near future ?
I'll take a look at it now.
[WARNING - multiple reports of bugs] Table Tamer Quote
07-13-2017 , 02:20 PM
Quote:
Originally Posted by pokecancer
If they put out an update, it would just crash as soon as you opened a table. Did the freezing stop?
Still does it sometimes but its been doing it so long i think its just there software. It often freezes and i have to alt+crtl+del to close it
[WARNING - multiple reports of bugs] Table Tamer Quote
07-13-2017 , 02:25 PM


Yh I had that checked. I now have it like this and there's a problem.



The problem is while trying to multisite. Stars is stealing focus from ACR but ACR doesn't steal it from Stars. I use HM2.
Also tried "do nothing" and also just "bring to front". Nothing changes with the focus stealing.
[WARNING - multiple reports of bugs] Table Tamer Quote
07-13-2017 , 03:52 PM
one other thing, my all in hotkey keeps making it a minraise instead. kind of ruins lives
[WARNING - multiple reports of bugs] Table Tamer Quote
07-13-2017 , 06:03 PM
Quote:
Originally Posted by Top Pig


Yh I had that checked. I now have it like this and there's a problem.



The problem is while trying to multisite. Stars is stealing focus from ACR but ACR doesn't steal it from Stars. I use HM2.
Also tried "do nothing" and also just "bring to front". Nothing changes with the focus stealing.
Fixed this by unchecking the focus box in stars as explained in set up lol DOH!!!!!!!! Still have the bizarre allin is minraise every so often tho
[WARNING - multiple reports of bugs] Table Tamer Quote
07-13-2017 , 06:54 PM
Quote:
Originally Posted by Top Pig


Yh I had that checked. I now have it like this and there's a problem.



The problem is while trying to multisite. Stars is stealing focus from ACR but ACR doesn't steal it from Stars. I use HM2.
Also tried "do nothing" and also just "bring to front". Nothing changes with the focus stealing.
In stars, go to settings/gameplay/multitabling and turn off popup table whenever user action is required.
[WARNING - multiple reports of bugs] Table Tamer Quote
07-13-2017 , 06:55 PM
Quote:
Originally Posted by Top Pig
one other thing, my all in hotkey keeps making it a minraise instead. kind of ruins lives
Is this on Stars or ACR or both? What game type do you play?
[WARNING - multiple reports of bugs] Table Tamer Quote

      
m