There seems to be an options to not show sngs in Later Registering state:

Hi,

Random problem today, my default open size on about 20% of my tables seems to have changed to allin.



Also noticed that on those tables that are affected, the software isn't reading betsizes correctly.



Playing on .UK, updated to latest version and problem persists.

Hi,

Random problem today, my default open size on about 20% of my tables seems to have changed to allin. (Should be 2.78bb in screenshot below)



Also noticed that on those tables that are affected, the software isn't reading betsizes correctly.



Playing on .UK, updated to latest version and problem persists.

Please send TO logs as described on www.tableoptimizer.com/support/

Great, email sent

edit: just spotted the update, tyvm

Still something bugging with this, betsizes now not displaying properly

I have the BB in big showing at the corner of my table. I wanted to have this shown for all the other players, thus have the BB shown for everyone. When i tried this at a cash table, this works and shows everyones BB stack.


But when i played a few sngs to test it out, some players BB would show up. But for others they do not. Tested this out in a few turbo sng and hyper turbo sng. Like one of them would show up after 1 hand, then in a few hands another one would show up. But after playing few hands, only a few players BB stack shows up. Is there a reason why this is the case? I normally play 180 man mtt and some low stakes tournaments and tested this out in an sng table first but it doesn't seem to work. The other thing is my BB stack size that i have in the top left corner shows 0 for the sng. But in the cash game table that i opened, everything shows up correctly but i dont play cash. However, there is no issues with everything showing up correctly in spin and goes.


Also what is the bb stack most ppl use? There is stack in bb, tourney adjusted bb, starting stack in bb and effective stack in bb. I tried a few of them and it seemed some of them would change depending on your stack? Like i dont recall which one would when your stack or someone elses stack get smaller as they are in a pot, it changes. I assume almost noone uses this one? And which one is this? Im really confused why anyone would use that?


Because the one im using is tourney adjusted bb. That is what most ppl use right? Thus even after you put chips in, it would show your original starting stack in bb as how much you started with before the hand.


Thanks.

Should be fixed in 1.6.7.7.

Please make a screenshot and send logs as described on: www.tableoptimizer.com/support/

"Stack in bb" is the one that changes every-time your stack changes in the hand.
"Starting stack in bb" is your original stack at the beginning of the hand. "Tourney adjusted bb" is also constant throughout the hand. I guess most people use "Starting stack in bb".

Is there a way to turn off that TO submits data to Hand2Note? My positional HUD doesn't work with TO on regular tables.

In order to disable Hand2Note integration you need to:
1. Click on "Open settings folder" in TO General tab.
2. Close TO.
3. Edit "options.xml"(or "options" if Windows is not showing extension) file with Notepad.
4. Replace '<hand2note enabled="1" />' with '<hand2note enabled="0" />'.
5. Save and close the file.

Can you make a screenshot that illustrates the problem before disabling it?

Thx for the quick reply.


Screenshot will not help a lot. Basically positional HUD works, but once someone sits out the positions get messed up. Looks like H2N doesn't use the data on regular tables and the mistake is at them.

Hello.
Is there a way to make the Bet slider step feature to work with the big blind rather than the small blind? it doesnt help to mix (in my case) NL25 and NL50.

Unfortunately not.

Hi,

Don´t know if this has been asked before but I use very often multystack layout and my problem is having checked the option sitout on tournaments opened during the break. So, if a tournament opens during the break it goes under the stack and he won´t popup and sometimes I forget to check if there´s a tournament that has started during the break and then I miss the first levels and that´s not very good.
Is there any solution, any trick to avoid this situation?
Thanks!

You should use "I'm back all tables" hotkey.

That is not a good solution in my opinion, you still have to remember all the time that after the break you could have tournaments starting. When you are grinding your brain are focus on the game, not on the tables that are going to open and that´s why people forget to check. you are on a deep run and you are not going to remember if this or that tournaments has started during the break.
I´ve used other software and the solution they had for this was, after the break you were automatically back at tournaments that started at the priviest break. For now I think I am not going to use sitout on tournaments during the break anymore cause I´d rather lose all my time bank than losing all the first levels.

You can add "Sitouted tables" to the hud and set the size and color so it will be hard to miss. You can also make it fully transparent when there are 0 tables on which you are sitouting. Then when you come back from the break you will instantly see that you need to press "I'm back all tables" hotkey.

Thanks, I appreciate your software because it's the only software in the market that can work properly with a multystack feature on pokerstars and I have try all of them. I don't use TO hud, I think this kind of huds pollutes the tables combined with the trackers huds (no offense)... To me the main problem is that the table that opens and goes sitout on the break is going under the multystack and is easely missed even with TO hud. Still think you can add a I'm back automatically after break ends feature... Maybe you consider to do this in the future.
Cheers.

You don't have to enable anything else in the hud, he means set it up so the only time it displays anything is if you have a table sitting out.

You could also use "Auto Slots" and move any sit-out tables out of the stack into a defined slot.

Hi there. I have the BB in bolded color on the top corner of the table so i could see how much BB i have on each table as i multitable lot of tables. I have that as the starting stack in bb for my main hud. That is what is shown on the top corner in bold color in number of my bb stack. I also put starting stacks in bb for the players hud as that way it would show every other players bb stack in bold. I also have that number shown for me as well. The issue here is say i have 50bb to start the hand. There is 50bb in bold color on the top corner of the table and also shows 50bb right on my avatar as well. The moment i put chips in, why does the 50bb number go down as i put more chips in? Thus say i put in chips and now it shows 35bb only. Yet the 50bb still stays the same on the top right corner?


The thing is aren't both of them suppose to always stay at 50bb regardless of how many chips i put into the pot? Thus when i play, i always want to have my starting stack in bb shown and now how much bb i have left when playing a hand. Or is this how its suppose to be like? Because isn't the stacking stack in bb in main hud and starting stacks in bb in the players hud the same? Or this is how it is and you basically just look at the top corner at your bb stack? And the starting stacks in bb in players hud for yourself, well it basically tells you how much bb you have left that way to let you know how much bb you have left remaining?


Im pretty sure its not starting stacks in bb or stacks in adjusted bb.

You are right, they should show the same thing. I will improve that.

Is there any plan to add option to filter spin and go's by multiplier in auto slots.

Not in the near future, but I like the idea.

So i have set up the layouts exactly the way i want it a while back. I have 24' monitor with 1920x1200 resolution where you get 4 tables right in the middle with no overlap. Thus imagine i have 12 tables. There would be 3 tables on each quadrant. If i want to move it to another quadrant, i just drag it a bit and it goes to the right one. Thus if i have 20 tables, it would be like a few behind each table etc.


Now i want to know this. If i wanted to have 6 tables showing on my screen... the reason being that way i could view more tables at once... and also because i want to have partypoker and 888 tables... thus imagine i have 6 quadrants. I would use the original ones with stars. But with 2 quadrants, one would be specifically partypoker and the other 888. The reason is because when i use to with stars, i use partycaption and 888caption with the other sites. And thus imagine i have 5 tables on one quadrant and say its 3 tables of partypoker and 2 tables of 888. Or something like 2 tables of stars, 2 of partypoker and 1 of 888, there is going to be not only lot of misclicking, but some tables don't pop up correctly. Does that make sense?


Thus i want one quadrant specifically for partypoker, one quadrant for 888. The other ones for stars. So how would i do this with TO? Do i set up slots again and click on autoslots and then what i click on afterwards? The thing is i want to make sure i do not have my old slot setup deleted as i used it for a while. But now i would like to maybe have 6 tables showing. The issue with this though is the tables would be a lot smaller.
But how do i do this? And is there a way where say i set up slots where its like 6 tables showing. 3 on the top and 3 right under it. Then when stars table open, it goes to say the stars quadrant only?


Thus imagine this


Stars Stars Partypoker


Stars Stars 888



I currently have it like this



Stars Stars


Stars Stars




But lately i tried playing on partypoker and 888. But my issue is i put all the partypoker tables on one quadrant. But there is usually 3 tables max only. And with 888 poker, max 2 tables. Thus i dont want to have like 5 tables using 2 quadrants. And say 15 tables between 2 quadrants.


Can you tell me how i can do this? The other thing is this. Let say i have 10 tables of stars and say 3 tables of 888 and 3 tables of partypoker. Thus it would look like this


Stars Stars Partypoker


Stars Stars 888



Now let say i bust out a lot of tables and only have a few tables only. Thus imagine i only have 3 tables of stars left and 1 table of party and 1 table of 888. Now would it be possible for the 6 table layout to go to the 4 table layout? Thus i would then have it like this


Stars Party


Stars 888



But how do i make sure i create a new 6 table layout now where i make sure my original layout with TO is not deleted? And the other thing is i would have to do this with 888caption and partycaption right? So how would this work since im mixing it up?



Thanks.