Open Side Menu Go to the Top
Register
Table Optimizer Table Optimizer

01-11-2016 , 12:27 PM
You can add the number of seated tables (and also number of tables needing action) in the hud. Number requiring action is very useful for stacking.
Table Optimizer Quote
01-11-2016 , 01:07 PM
Quote:
Originally Posted by digger24
history from the hud is not showing up on the tables. anything i can do?
Make sure that "Dealer messages" are set to "Everyting" in Pokerstars options/Table Appearance/Chat.

Quote:
Originally Posted by lindridge
I Have a couple of questions regarding the software, i am wanting for my middle roll ball on my mouse increasing the bet to every 0.25bb instead of 0.5bb (the pokerstars setting), i have bet slider step under layouts/hotkeys set to 0.25 but nothing seems to be happening. Also i am unable to produce a hotkey to "move to next screen" also under hotkeys. Last question is can i have a number someone on my screen to tell me how many tables i have open as i stack i would be nice to know.....Thanks in advance to any replys, great piece of software. Ben
You need to click on "Bet slider" in TO hotkey list and assign hotkeys to "Increase/Decrease bet". You can use mouse wheel for that.

Please elaborate on the problem with "Move to next screen" hotkey.
Table Optimizer Quote
01-11-2016 , 02:12 PM
i will see if i have fixed the problem first, should supress hotkeys be ticked?
Table Optimizer Quote
01-11-2016 , 02:33 PM
still having the same problem, i want a hotkey where i can move to the next table (or previous) so i can see actions from all in hands etc but when i click that hotkey it just writes it on chat, is it because i have also am also using the hotkeys on the pokerstars software, should i disable the hotkeys in pokerstars and have them all on Table Op? thanks
Table Optimizer Quote
01-11-2016 , 02:37 PM
is there an enable hotkeys button on T.o? Do i have to click activate HUD to enable the hotkeys on T.o?
Table Optimizer Quote
01-11-2016 , 09:40 PM
Quote:
Originally Posted by czyngischan
You will have two frames.


I don't know what most people do. "Bring to Foreground" will bring table under mouse to foreground. It makes sense when tables are overlapping.


"Activate table under mouse" in TO does the same thing as "Bring to foreground" in pokerstars. "Jump mouse to actve table" does actually move mouse cursor to the table everytime it's activated. I don't recommend enabling this if you browse internet while playing poker.


I think that table under mouse mode is safer.


Do most people use 2 frames or just 1 frame? If 1 frame, they use stars frame or TO frame?


I noticed something else. When i played earlier and had the target table frame on stars but didn't put frame on TO... when i moved table myself manually, it almost never resized horribly. Could that be due to the frames on TO? I had the issue of moving tables and it keeps getting too big. Then when i try to make it small, its hard and keeps going back to the big size.


I have up to 24 tables. So around 6 tables on each side of monitor 1920x1200. So imagine 4 tables tiled. Then 5 tables behind each table. So with that, i shouldn't want bring to foreground right? There isn't any overlap at all with the 4 tables that i see on my screen. Of course there are 5 tables behind each table and each table behind each one pops up when action is on it.


I tried the jump mouse to active table. That is really nice if you are only playing poker. I move my mouse all the time since i have 24 tables and tile 4 of them then each one is behind one of those tables. But with jump mouse to active table, i never have to move mouse at all. It was really nice. But issue is if i do this, then its hard to move tables around manually right? Like when i was in a final table of a 180 man, i normally move it to top right corner but i couldn't do it because every few seconds my mouse kept going to the active table. Does that make sense?


Now if i never have to move a table, then this is really nice.


The table under mouse or the active table... yes it seems table under mouse is better. But it requires me to move the mouse to each table.


I'm curious but do almost every uses hotkeys? I used it today for preflop and post flop betting with certain letters in the keyboard... much easier than having to press the bet size like 1/2 the pot then bet it.


Another thing. But is there a way in TO with a hotkey to 3bet a certain amount? For example say someone at blinds 100/200 raised to 400. I want to reraise to say 1000 or 1200... could i have a hotkey where my 3bet would be 2.5x or 3x their opening raise? Like if blinds are 10/20 and someone raises to 60, i would like to 3bet to 150 or 180. Can i do this with a hotkey as oppose to dragging my mouse to 150 or 180?


I had tried to 3bet with one of my hotkeys where it was for post flop betting. When i did this, when someone raise to 60, it would 3bet to like 168 or something like that. But if i use a bigger flop size hotkey... it would 3bet to like 192 and something strange.
Table Optimizer Quote
01-12-2016 , 04:38 AM
Quote:
Originally Posted by lindridge
i will see if i have fixed the problem first, should supress hotkeys be ticked?
"Supress hotkeys" will prevent other applications from receiving information that a key was pressed. You can enable it if you want to use a key combination that is one of Pokerstars default hotkeys such as ctrl+0.

Quote:
Originally Posted by lindridge
still having the same problem, i want a hotkey where i can move to the next table (or previous) so i can see actions from all in hands etc but when i click that hotkey it just writes it on chat, is it because i have also am also using the hotkeys on the pokerstars software, should i disable the hotkeys in pokerstars and have them all on Table Op? thanks
Your need to setup "Next", "Previous" and "First in line" hotkeys under "Cycling". You don't need to disable Pokerstars hotkeys.

Quote:
Originally Posted by lindridge
is there an enable hotkeys button on T.o? Do i have to click activate HUD to enable the hotkeys on T.o?
Yes, Hotkeys/Other/Enable hotkeys.
Table Optimizer Quote
01-12-2016 , 05:27 AM
Quote:
Originally Posted by PaulyJames200x
Do most people use 2 frames or just 1 frame? If 1 frame, they use stars frame or TO frame?


I noticed something else. When i played earlier and had the target table frame on stars but didn't put frame on TO... when i moved table myself manually, it almost never resized horribly. Could that be due to the frames on TO? I had the issue of moving tables and it keeps getting too big. Then when i try to make it small, its hard and keeps going back to the big size.
I think most people use just one, it doesn't really matter which one. I don't think that TO frames can cause problems with resizing tables.

Quote:
Originally Posted by PaulyJames200x
I have up to 24 tables. So around 6 tables on each side of monitor 1920x1200. So imagine 4 tables tiled. Then 5 tables behind each table. So with that, i shouldn't want bring to foreground right?
Yes.

Quote:
Originally Posted by PaulyJames200x
I tried the jump mouse to active table. That is really nice if you are only playing poker. I move my mouse all the time since i have 24 tables and tile 4 of them then each one is behind one of those tables. But with jump mouse to active table, i never have to move mouse at all. It was really nice. But issue is if i do this, then its hard to move tables around manually right? Like when i was in a final table of a 180 man, i normally move it to top right corner but i couldn't do it because every few seconds my mouse kept going to the active table. Does that make sense?
Moving tables manually will be problematic. You would have to do it only when action is required on some table so new tables won't steal focus while you're dragging a table to it's spot.

Quote:
Originally Posted by PaulyJames200x
I'm curious but do almost every uses hotkeys? I used it today for preflop and post flop betting with certain letters in the keyboard... much easier than having to press the bet size like 1/2 the pot then bet it.
Yes, hotkeys are quite popular.

Quote:
Originally Posted by PaulyJames200x
Another thing. But is there a way in TO with a hotkey to 3bet a certain amount? For example say someone at blinds 100/200 raised to 400. I want to reraise to say 1000 or 1200... could i have a hotkey where my 3bet would be 2.5x or 3x their opening raise? Like if blinds are 10/20 and someone raises to 60, i would like to 3bet to 150 or 180. Can i do this with a hotkey as oppose to dragging my mouse to 150 or 180?


I had tried to 3bet with one of my hotkeys where it was for post flop betting. When i did this, when someone raise to 60, it would 3bet to like 168 or something like that. But if i use a bigger flop size hotkey... it would 3bet to like 192 and something strange.
There are no such hotkeys in TO. You can use "Bet/Raise X% of Pot" in Pokerstars.
Table Optimizer Quote
01-12-2016 , 08:59 PM
There is no hotkey on stars to bet/raise X amount? Such as someone raises to 200... you can 2.5x or 3x or 3.5x it etc? The percentage .. raise X percent of pot i don't like because it raises to a weird number.
Table Optimizer Quote
01-14-2016 , 01:00 PM
Is it possible to set a hotkey for moving a table from one slot to an other free slot?
I tried tiling 12 tables on one monitor and when slots are free they sometimes scatter across the screen so i would like to move a table from slot10 to slot4 for example.
Table Optimizer Quote
01-14-2016 , 02:30 PM
Quote:
Originally Posted by Slugant
Is it possible to set a hotkey for moving a table from one slot to an other free slot?
I tried tiling 12 tables on one monitor and when slots are free they sometimes scatter across the screen so i would like to move a table from slot10 to slot4 for example.
Assuming you're talking about regular(blue) slots you can:
1. Press "Move to stack/slot" hotkey twice. After first press a table will go to the stack, after second to the first empty slot.
2. Check "Enable slot swapping" and drag a table with a mouse.
3. Check "Sort slots". This will automatically fill the gap in you layout after you close a table.
Table Optimizer Quote
01-14-2016 , 04:20 PM
option 2 worked perfect for me, thanks
Table Optimizer Quote
01-14-2016 , 07:52 PM
MY TO works. However... the TO icon on my desktop looks broken. Like it looks like a broken file if you know what i mean. How do i fix this issue?
Table Optimizer Quote
01-15-2016 , 03:33 AM
Unfortunately, I have no idea why this happens. You can try doing this: http://www.sevenforums.com/tutorials...e-rebuild.html
Table Optimizer Quote
01-15-2016 , 01:40 PM
just curious but when did tableoptimizer launch.
Table Optimizer Quote
01-16-2016 , 04:06 AM
About two years ago.
Table Optimizer Quote
01-16-2016 , 02:27 PM
Today for no reason all my settings are gone. I did an update but still it looks like someone just reinstalled TO. Help pls if possible.

Edit: I solved it by restoring windows . Would be nice to add a backup option for TO settings .

Last edited by easy.life; 01-16-2016 at 02:44 PM.
Table Optimizer Quote
01-16-2016 , 03:49 PM
just backup the whole TO folder or backup just the options.ini

i have an options.ini.bak, but i guess after updating those files could be accidentally deleted.
Table Optimizer Quote
01-17-2016 , 09:43 AM
Hi,

I just bought a laptop and is it possible to use TO there too along with my desktop?

Of course not at the same time, but I'd like to grind on my laptop sometimes.
Table Optimizer Quote
01-17-2016 , 09:45 AM
You can use TO on unlimited number of computers.
Table Optimizer Quote
01-17-2016 , 08:44 PM
I just upgraded TO to the latest version, and I can't type anything into betbox postflop (The mouse cursor doesn't appear even if I click it). I also use money to bb option.

Could you help with this??
Table Optimizer Quote
01-18-2016 , 04:46 AM
Please make a screenshot.
Table Optimizer Quote
01-18-2016 , 02:11 PM
Quote:
Originally Posted by baebba
I just upgraded TO to the latest version, and I can't type anything into betbox postflop (The mouse cursor doesn't appear even if I click it). I also use money to bb option.

Could you help with this??
Experiencing exact same problem after updating to latest version. I'm using the black theme and have TO set to black theme Is there a fix/way to downgrade to previous version which worked perfectly fine?



as you can see bet box is completely white no cursor showing whether you click it or not and when you do click it just makes some loud bell type noise
Table Optimizer Quote
01-18-2016 , 02:31 PM
Quote:
Originally Posted by WonTr1ckPony
Experiencing exact same problem after updating to latest version. I'm using the black theme and have TO set to black theme Is there a fix/way to downgrade to previous version which worked perfectly fine?



as you can see bet box is completely white no cursor showing whether you click it or not and when you do click it just makes some loud bell type noise
Latest update mentioned something about the betbox, try updating.
Table Optimizer Quote
01-18-2016 , 06:08 PM
Same problem as WontrickPony....

I am using the latest update version btw.

Also, using the nova theme.
Table Optimizer Quote

      
m