Also on a related question. My monitor is 24' and 1920 x 1200 resolution. If i were to have a 27' or 30' monitor, would it be possible to have 6 tables shown on my monitor where the tables are default size? I always liked the stars tables default size as its big. I seen ppl do like 9 table tile or 12 table tile or even more. I dont know how in the world ppl can play like that because not only are the cards too small, the betting is way too hard etc. Thus the most tables i would want shown on the screen is 6 max. Reason being to add partypoker and 888.


Now what if i get a 2nd monitor? Then i would be able to do it like the way now with Stars tables and then with partypoker and 888? Which would be better? Getting a 2nd monitor like this? Or a bigger monitor than the one i have to have 6 table showing? But could you have 6 tables at default size on one monitor where its 3 on the top and 3 right below it?


I will most likely not be able to get a bigger monitor like this. But what about 6 tables on my current monitor tiled? The tables are a bit smaller i noticed when i tried this without having to on and neither partycaption nor 888caption.

You should create a new layout with 4 auto slots for PokerStars tables and an empty space for tables from other rooms. This video shows how to add layout and setup auto-slots in example#1 https://www.youtube.com/watch?v=d-AM1oywiCc


Again, create another layout with 2 auto-slots and empty space for tables from other rooms. You can switch between layout manually or by hotkey.

Hi i watched that video. The thing is this.


I already have autoslot configured the original way i did it. Example i have auto slot 1, 2, 3, 4 on my monitor and thus its regular default size. Thus if i have say 20 tables... there would be like 5 on each quadrant etc... each one behind each table.


I want to be able to create another auto slot layout. So do i click on setup slots? Then click on auto slots? When i do this, i see my auto slot layout. It shows on the right side
Default
Add New Profile


It shows max tables 24



I want another very similar layout where instead of it being 4 tables showing... i want it to have 6 tables... like imagine 3 tables on the top, 3 right below it. The size would be like imagine you open 6 stars tables and then click tile. Then once you do that, you increase the size of each table a bit because theres a gap in all of them. And also because tables would be way too small so thus that would make it at least a bit bigger.


So here... i click on add new profile


It shows


auto slots filter profiles


Shows profile as Default. I assume this my regular auto slot layout? So how do i create a new auto slot layout with 6 tables? Thus if i have say 18 tables... it would be like 3 at the top, 3 at bottom and behind each table would be 2 behind each etc. Does that make sense what im talking about? Because it seem like you are only allowed one autoslot layout? Because i dont want to mess this up and erase my default layout with the auto slot i currently have.


Like for profile i want to change it to say 6 table layout meaning i want 6 tables shown at smaller size even if i have say 18 tables etc. I do that and click add next to it. Then click at bottom right add to slot. But nothing is added?

To add another layout you need to:
1. Click on current layout name e.g. "layout".
2. Type a new layout name e.g. "new_layout".
3. Press "Add" button.
"new_layout" will be a clone of "layout".
This is shown in the video from 0:05 to 0:12.

When you have a new layout you should click on "Setup slots" and add/resize slots to your liking.

Hi, i have configured preflob 2,5bb vom SB and BB, 3BB all others and 3Bet 10BB and it works great. If one player limps i want to raise 100% potsize.



It doesn't work? Can someone help me?

If someone limps and it folds to you on the cutoff the pot is 2.5bb (aassuming 50% sb size), currently you're asking for both 3bb (line 4) and 100% pot (line 1).

On lines 4, 5 and 6 you ask for a 3bb/2.5bb raise if the pot size is 2.5bb or less. Change it to 1.5bb or less (i.e. unopened pot) and it should work.

Perfect, works great.

So pokerstars did disconnect for a half a minute and when it reconnected I noticed action is a bit slow (my tables are in stack). After awhile i opened stack prewiever and saw i'm sitting out on few tables and getting blinded out fast, i restarted TO and same ****. I felt like after ps disconnected TO didn't recognize those tables anymore and didn't move around auto slots.

And yes, otherwise it's clicking i'm back instantly.

TO won't seat you back if a timeout is caused by disconnection. You need to use "I'm back all tables" hotkey.
You may also try to add "Sitouted tables" into the hud.

Good to know, expensive lesson learned. Will do.

Hi there. I have 1920x1200 monitor and tile 4 tables. And when i have 20 tables going, it would be like 5 tables on each quadrant. I have it in a way where if i move a table from one quadrant to another, it moves automatically to its place.


I recently connected a 2nd monitor that is also 24' and 1920x1200 resolution. Its not the same model and is actually smaller size wise. I put that monitor on the left my my right monitor. Thus i have 2 monitors now and also have my laptop screen all the left. Thus imagine its like screens are laptop screen, monitor, monitor. When i open up tables at the moment, they all show up on my regular monitor on the same quadrant. I want to be able to do the same thing on the other 24' monitor. Thus say table 5 opens, i want it opened on the 1st monitor or vice versa. Thus imagine i have 8 tables opened, i want 4 tables on each monitor. And i want to be able to move the tables from one quadrant to another and most importantly, a table from one monitor... to the other monitor where it automatically goes into the spot. Can you tell me how i can do this?


Thus imagine i have say 20 tables of stars, party and 888. I would like certain quadrants like imagine monitor 1 to be party, another is 888. While the other quadrants are solely for stars. With those other 2 sites, i dont mind manually moving table by myself and having to do it manually because i don't have that many of those tables compared to stars. Also i do this so if i have lot of tables and a table is more important, i want to keep say 1 quadrant or 2 quadrant spots where i could see all the action and no table blocks it. Can you tell me how to do this? Also i could keep my current layout... and also do this layout? I would be using this new layout from now on unless i dont like it somehow. I know its under slots and auto slots but i want to make sure i keep this current layout. So i assume i open 8 stars tables, then put them exactly where i want it to be. Then change that number of tables to 24? Or would i have to manually do 8 tables, then do another 8 and another 8. Thanks.

Also how would it work if i wanted my stars tables to be on my left monitor... the one that i just connected it to? Thus imagine my stars tables are on the left monitor and party/888 tables, i want it on the right side monitor... thus the current one. I know if i just switched my monitors from left to right... well that would work. But i prefer this other monitor to be on the left side whereas the monitor i been using on the right.

Hi,
I'm trying to preset some preflop bets but I can't get what I want without having the bets override/cancel one another. How should I set it if I want the following f.e BTN:
unopened ->open 2.2bb
limp -> open 3.6bb
raised before -> 90% (PS way of %)
Thanks.

If blinds are 1/2 structure pot size <=1.5 is unopened, <=2.5 would be one limp then a final one with no pot size specified for 90% pot.

Pauly - look in the layouts page. There are tabs for each of your monitors, you can set up a new layout however you like. Spend some time learning how Auto-slots works, it can do anything you need.

Hi there. Yes im on that page. There is monitor 1, primary monitor and monitor 3 there. I assume the one im using on my regular monitor screen is primary monitor? The thing is i have it like this on my desk...


laptop...monitor i just connected....current monitor.


Thus i want the tables to show up on the 24' monitor on the left... which is the monitor i just connected to instead of the old monitor im using. Then i want to be able to have same layout on this monitor as my old one. But when more tables open. i want to move tables from that monitor to the current one im using. But sometimes i might want 12 stars tables on one monitor... and say if i have 8 tables of 888 and partypoker, well of that on the other monitor. But i want to move stars tables around to any quadrant i like etc.


So am i suppose to click on Monitor 3... setup alots... auto slot? When i do this, 4 tables of auto slot 1, 2, 3 and 4 show up on my current monitor screen. This is the exact same thing that show up on my current monitor when i use 1 table. So i assume on monitor 3... do this. Then move those auto slots to exactly where i want on the left 24' monitor? So whenever tables open... they would start opening on one monitor. Then after a while open on the other one?

Monitors tabs are for tiling so you shouldn't use them at all.
What you need to do is click on "Setup slots" and move your auto-slots to the monitor on the left.

Moving tables manually to the monitor on the right is a problem. If you make auto-slots on both monitors, they are going to distribute tables between two monitors evenly which I guess is not something that you want. You could create hotkey slots on your current monitor but you would then need to use hotkeys instead of dragging tables with the mouse.

??

That didn't work? That's how I've got the pot size filters set and it works fine.

Edit: Maybe you're on mobile, tapatalk doesn't seem to like the symbols in my other post.

Pot size filters:
Less than or equal to 1.5 for unopened = 2.2bb
Less than or equal to 2.5 for one limper = 3.6bb
No pot size specified = 90%

Yes I'm on mobile and didn't see the message. Thnx for the edit.
Regarding the last one, I should have clarified, I meant I wanna 3bet to 90% pot. Do I still just input 90% with no additional filters?

Yeah, any pot size over 2.5 bb it'll do 90% so it'll cover any 3bet situations.

Thanks all works now.

I use expected pot in bb stat and find it very useful. Is there a way to also see expected effective stack in bb? or maybe expected effective SPR? If, not any chance you can add this stat so it can be easy to choose a bet size that gives us a desired SPR for next street?

This is unlikely. I'm focuesd on other projects atm and don't have much time to add new features to TO.

Having a small issue with multi-stack popup - when I've got a free play in the bb (limped pot) and the flop action is on me TO will sometimes pop another table in front. Only noticed it happening in this situation so far.

An update for the latest .RO (romanian) version please 24.0.2.1?
It`s more than one week since it says that the latest compatible version is 23.5.6.8
The Optimizer version I have is 1.7.0.8
Thanks!