I updated tableoptimizer on the check updates. Then i could not use it because it says i needed to update stars. I then click on stars icon and it seems to update.


When i click on autoregister sng... it does not register and i got an error message but i dont know what that message says.

I'm unable to reproduce this. Please send logs and settings as described here: https://www.tableoptimizer.com/support/

Please make a screenshot of that error message.

Hi there. I cannot make a picture of the message because it shows up and goes too fast when i click start to autoregister sngs.


It says on my program


pokerstars.com version: 19.9.3.6 (compatible)


I had updated my tableoptimizer by clicking check for updates. I have not done this in a while. And when i did this, i opened stars and noticed tableoptimizer said pokerstars is not compatible and i needed to update stars. I normally open stars by clicking on the stars icon my desktop but when i open it that way, it always opens up without checking for an update. So i would click start menu... then click on the pokerstars program... that program does check for updates i recalled when i use to click on that previously but no longer did it... it took a long time and froze. So i opened it up again and had the same issue. Then i opened that program again from start menu and it updated. Then i logged into stars and i notice on tableoptimizer it does say compatible so i figure it would work.


But when i click start to autoregister, it has that error message.


So does this have something to do with my stars program instead? I don't know whats going on here.

If it says that it's compatible then it should be fine. You can always reinstall PokerStars to be sure.

I don't remember ever seeing the problem you are describing. Maybe your start menu PokerStars shortcut is not starting PokerStars as an administrator? In such case there should be an error message in TO Troubleshooting tab. I don't have other ideas at the moment. Please send me logs as described here: https://www.tableoptimizer.com/support/

[QUOTE=czyngischan;53132591]I'm unable to reproduce this. Please send logs and settings as described here: https://www.tableoptimizer.com/support/

Nevermind, i just had to move the panel to the right place. But thank you.

Register not working after stars update ??

This should be fixed in version 1.6.3.1.

Hi,

Could you please change money to bb to not to change pot size and bet sizes or have the option to only change players stack size into bb?
Players hud show stack in bb doesn't update real time during a hand.
Thanks.

Stack in bb in players hud will update in real time if you set "Dealer messages" to "Everything" in PokerStars settings/Table appearance/Chat.

Hi there. Want to ask this again


Foes anyone know of a way where when you play many tables... let say 24 tables. I have a 1920x1200 monitor where if im playing many tables, there are 4 tables visible at regular size only. All the other tables are behind these tables. Thus if i was playing say 24 tables... i would want 6 tables on each quadrant of my monitor. Thus once there is an action required on a table, that table pops up over the one i have on that quadrant etc. The thing is each time a new table shows up, it seems to be always on the top left or right quadrant of my monitor and i have to move each one manually every time. Thus if 12 tables open up and i do not move any of it, i might have 8 tables on the top left, 2 on the top right and 2 on the bottom left etc. I had tried the save layout on stars where i would open microstakes tables where i put the first one in top left, then top right etc. But when my tables open, they keep showing up on the top left and right. This requires me to move the tables manually always.


Is there an easier way to do this? I believe this has something to do with slots but would this work with the way i want it to work? I checked starshelper faq and i think they have this option? I could not get this to work on tableoptimizer.


Also i was told in another thread that you could set a 3bet size to a certain amount whether IP or OOP? I thought this wasn't allowed? I believe tableoptimizer does not allow this because stars does not allow this? I know you can set preflop sizes but if someone raises, isn't that not allowed?


Thanks.

I wrote a more detailed of what i want to do.


Also with the autoslots, do you know its possible to do what i want i listed?


For example i play mttsng and mtt and play up to 20 tables or a bit more. When tables open, i want it to open on


Top Left Corner, Top Right Corner, Bottom Left Corner and Bottom Right Corner.


Thus if i have 20 tables opened... i would want 5 tables on the top left, then top right etc.


Is there a way to do this? I did the stars save layout thing not related to this but that doesn't seem to work.


The other thing i want to do is this and like to know if its possible. Is it possible to have mttsng on the top left/right of my monitor... but any mtt... be on the bottom left/bottom right? Is there some setting that would allow this?


Also another thing i want to do is if i cant do that... is it possible to move a table on one quadrant of my monitor to another corner without having to manually drag it there? Not only does this take a lot of time, but i want to move it exactly on the spot where there is no overlap. Because when i do this, the table might be a bit smaller or bigger because im manually moving it to the top left or top right. I do this with tables where the blinds are high etc. Thus if i have tables on the top left/right where the blinds are low, i want to move these tables to the bottom left/right of my monitor. Thus if i could just press control + something to automatically move it to the bottom left or right or top left or right on the table, that would be really nice.


I recall someone mentioned you could actually move tables to where the blind levels that are highest goes on the top to have more focus etc. So in a way i want it like this. Thus many times i would when having 20 tables... i might have 2 tables visible on the top left/right... whereas the other 18 tables are on the bottom left/right because my attention are on the top part of my monitor and i dont want any table blocking it... and the other 18 tables are below on the bottom.



Thus imagine its like this on my 1920x1200 monitor 24 inch screen


Table 1 Table 2


Table 3 Table 4



Thus table 5 would be behind table 1, etc. Thus i would have 5 tables on each quadrant of my monitor. But i also want the low blind levels to be moved on where table 3 and table 4 spots are when i want nothing blocking table 1 and maybe 2.


Can you tell me if i could do this with TO?

Yes, look at example 1 in this video: https://www.youtube.com/watch?v=d-AM1oywiCc
To play comfortably with this layout you should also enable "Popup table when user action required" and "Enable multi-stack" in TO General tab. If your stacks are overlapping or you are using Windows 10 you should also enable "Stacks are overlapping".

TO can distinguish mtt from sng only by number of entrants. So if mtts that you are playing have more that 990 entrants you could do this using "Entrants" filter in auto slots.

If you are using auto slots you can enable "Enable slot swapping" option. Then you would be able to drag a table and drop it close to the desired location and TO would make sure that it's positioned correctly.

You can create a layout with top two slots only for tables with high blind level. Of course such layout wouldn't be very useful at the beginning of your session so you would have to manually switch to it when required.

Hi i watched the video.



To play comfortably with this layout you should also enable "Popup table when user action required"


I do not have this checked on TO. However, i have this checked on the pokerstars settings. So i should uncheck this on stars settings and check it on TO settings? Because i believe u can't check both?





TO can distinguish mtt from sng only by number of entrants. So if mtts that you are playing have more that 990 entrants you could do this using "Entrants" filter in auto slots.


So if i want slot 3 and 4 to be tournaments with say 500 entrants or more, i would put the minimum as 500 and a big number for max?





If you are using auto slots you can enable "Enable slot swapping" option. Then you would be able to drag a table and drop it close to the desired location and TO would make sure that it's positioned correctly.


Isn't all im doing auto slots? Because there is slots and hotkey slots and i dont think the video shows what that is and i don't think its that popular?





You can create a layout with top two slots only for tables with high blind level. Of course such layout wouldn't be very useful at the beginning of your session so you would have to manually switch to it when required.[/QUOTE]


Can you tell me how i would do this? For example i play 180 man mtt but i want these on slot 1 and 2 but mainly if it gets down to less people. Thus i want the higher blind levels to be in the slot 1 and 2... thus top left and right. What would i need to input?


Also if i input that, wouldn't that mean at the beginning of the session, no 180 man sng would ever open up in the top left and right slots then? The thing is i want the tables to load as they do... slot 1, 2, 3 etc. But say one of these the blind level is higher... and say its on the bottom left slot 3.... would it automatically get moved to the slot 1 or 2? Basically i want any tournament that starts out to be in the slot 3 and 4 if i have a lot of tables going like normal. And any tables at slot 3 and 4 that are higher blind level, i want it to get moved to the top slots. Thus the low level blinds i want at the bottom. Can you tell me what to input in the bb? I watched the video and it shows the person putting bb<100 or bb<60. I would like to see the blind level being done instead because you could have 10bb when its 10/20 blind level or when its 1000/2000 etc. But if the tables go from slot 3 to 1... do tables from 1 go to 3 or not? So what bb would you suggest i put down in these slots?


Because say i have 12 tables going. A few of them are when its 10/20 or 25/50. But some tables are 300/600 etc. I want the higher blind levels on the top 2 slots. Basically the higher the blind level, i want it on the top. The lower it is, i want it at the bottom. Of course if most of the tables are like 100/200 and below, of course i dont mind it being spread out etc.

So i tried to do this. I want to make any tables when blinds are 500/1000... i want it to be max 500/1000 blind levels on the bottom 2 slots before it moves up to the top 2. Thus when it hits 500/1000, it moves to the top 2. How do i do this?


I clicked auto slot. Then i clicked on add new profile. So do i put down for the profile.. name it bb<1200? Because 500/1000 is the last blind level before it hits 600/1200? For the BB level... it shows 0 and like 4 billion. So here... what am suppose to put as the min and max? Min should always be 0 but isn't max i put 1000 or 1200? Because once i do this and click save, then i have to make sure it shows bb<1200? It shows default for all my slot tables. But one of them it shows

default
bb <1200
profile


Am i suppose to remove/delete the default in that slot? This is a bottom slot. It doesn't seem to allow me to delete default so i assume its suppose to look like this?


Also i checked the enable slot swapping. So this means when i move a table from slot 1 to 3 for example, just drag it down and it would auto put it in right spot? Is it possible to do something like control + letter to do this? Like control + 1 would go to slot 1 etc? I assume not?


Also i have a custom layout saved on stars settings. Do i need to remove or cancel this because of tableoptimizer or not?


Also if say i have a 1 or 2 tables where the blind level is very high and i dont want any other tables on the top left/right and have those 1 or 2 tables visible with no tables over it, if i drag the smaller blind level tables to the bottom, they would not automatically go back to the top right? However what if they are blind levels of 500/1000? Because it would still automatically move to the top right?

You need to remove "Default" so you have only "bb < 1200" in bottom slots. To do that click on "Default" profile in red slot and press delete on your keyboard. To add "bb < 1200" to other slot select it in "Auto slots filter profiles" dialog and click on "Add to slot".
BB level should be set to (0, 1000].
So you should end up with:
slot1: "Default" slot2: "Default"
slot3: "bb < 1200" slot4: "bb < 1200"

It's not possible to do it with keyboard.

No.

You won't be able to drag them down if BB level is greater than 1000.

how do i add raise 1bb extra preflop for every limper ?

I have a problem with ante tables on pokerstars.

TO changes my preflop raise amount. I have it at 2.4bb raise but it seems to raise more on ante tables even though I have it 0 at 'sum of antes'

It can also be caused by rounding options or by ante level filter.
If you can't figure it out on your own, please send your logs and settings as described on www.tableoptimizer.com/support/ .

Sugestion: To add the option "Possible to make an action" on Smart stacking mode, the table would move from the stack to a slot when it's possible to mark the checkbox to fold or check the hand after is delt. It is similar to "Possiblility to make an action" frame on starshelper, so I believe it would be easily implemented.

In Zoom mode tables move to slots when a fold checkbox is available. Have you tried it?

I will check it, thanks.

Fixed.

Hey guys, if I use Table Optimizer to help me manage my tables (I play tile) it will work properly on Pokerstars and PartyPoker? or only Stars?

I want the new tables goes to an empty slot always.

Thanks in advance!

It works only on PokerStars.

ty!