TABLE MANAGER StackAndTile - Page 61 - Poker Software -- Two Plus Two Poker Forums

hey I've played a decent number of sessions now with the latest version .12 and it seems like the bug where a table doesn't tile properly still exists, it just seems to happen less often. I'm really surprised no one else has reported having this bug that I've seen since I experience this on two different computers. Anyway, no notification or dialog pops up when it happens,

hmmm, ok thats strange that you dont' get the popup. so the bug must be elsewhere. i can't really dive into it cause i'm spending so much time trying to get this stupid new vpip mode working

Quote

09-03-2010 , 11:16 AM

#1502

DieBanksters

enthusiast

Join Date: Oct 2009 Posts: 62

Quote:

Originally Posted by greg nice

are you sure the tables are going to the main stack and not the New Tables stack? please post your SaT-new.ini (or whatever your config ini is named) inside code tags and ill have a look

I have stack 2 set up for new tables, which is where they all pop up correctly. As soon as they pop up, I click them and hit S, my stack hotkey, and they correctly go to the main stack. They all show up properly in SaT as being stacked. This initial phase always goes smoothly. It's after they have been stacked and require another action that it goes to hell.

Here is the ini:

Code:

[general]
gui_x=328
gui_y=1279
last_tab=
[settings]
table_width=1078
table_height=763
total_slots=2
slot1x=759
slot1y=315
stack_slot=1
newtables_slot=2
move_on_street=never
slot2x=3
slot2y=5
[sites]
number_of_sites=3
included_sites=FullTiltPoker,PokerStarsHyperSimple,UltimateBetTop
FullTiltPoker_included_executable_path=C:\Program Files (x86)\Full Tilt Poker\FullTiltPoker.exe
FullTiltPoker_included_resized_table_width=1078
FullTiltPoker_included_resized_table_height=763
FullTiltPoker_included_fold_color=0x936d08
FullTiltPoker_included_fold_x_scaled=699
FullTiltPoker_included_fold_y_scaled=698
FullTiltPoker_included_call_color=0x936d08
FullTiltPoker_included_call_x_scaled=834
FullTiltPoker_included_call_y_scaled=698
PokerStarsHyperSimple_included_executable_path=C:\Program Files (x86)\PokerStars\PokerStars.exe
PokerStarsHyperSimple_included_resized_table_width=1078
PokerStarsHyperSimple_included_resized_table_height=763
PokerStarsHyperSimple_included_fold_color=0x919191
PokerStarsHyperSimple_included_fold_x_scaled=634
PokerStarsHyperSimple_included_fold_y_scaled=700
UltimateBetTop_included_executable_path=C:\Program Files (x86)\UB\mainclient.exe
UltimateBetTop_included_resized_table_width=1078
UltimateBetTop_included_resized_table_height=763
UltimateBetTop_included_fold_color=0x2abbea
UltimateBetTop_included_fold_x_scaled=647
UltimateBetTop_included_fold_y_scaled=739
[hotkeys]
number_of_hotkeys=3
hotkey1action=Send table to bottom
hotkey1key=X
hotkey2action=Stack table
hotkey2key=S
hotkey3action=Fold + Stack table
hotkey3key=F
send_table_under_mouse=1

Quote

09-03-2010 , 04:14 PM

#1503

greg nice

Carpal \'Tunnel

Join Date: Aug 2004 Posts: 9,990

Quote:

Originally Posted by betweaver

standard_table_width=808
standard_table_height=584

are you sure these numbers are right?

slight differences between computers won't matter, as long as the fold coordinate is correct relative to the standard_table_width that you specify

for ex: if you have

Code:

standard_table_width=800
standard_table_height=600
fold_button_x_coord=400
fold_button_y_coord=300

Code:

standard_table_width=400
standard_table_height=300
fold_button_x_coord=200
fold_button_y_coord=150

SaT *should* still be able to scale these coords correctly to whatever your grid tablesize is, since they are the same proportions. its named the way it is for simplicity for other people to create new site ini's and share them so its easier to verify if the coords are correct if everyone uses the standard table sizes

Quote

09-03-2010 , 04:16 PM

#1504

greg nice

Carpal \'Tunnel

Join Date: Aug 2004 Posts: 9,990

Quote:

Originally Posted by DieBanksters

when you press 'S' for your fold+stack hotkey when a table is in the New Tables Slot, does the hand correctly fold before moving to stack?

Quote

09-03-2010 , 05:19 PM

#1505

greg nice

Carpal \'Tunnel

Join Date: Aug 2004 Posts: 9,990

Quote:

Originally Posted by greg nice

when you press 'S' for your fold+stack hotkey when a table is in the New Tables Slot, does the hand correctly fold before moving to stack?

whoops your hotkey is 'F' for fold+stack. please try that.

i just tried your SaT config.ini and i used your pokerstarshypersimple.ini and it wasnt working for me either. fold+stack didnt work either. confirm if fold+stack correctly clicks fold on the tables

if not, youll need to start over and re-include your sites. press F10 when fold button is visible, not when the pre-checkboxes are there

btw, i added those 3 sites for me and opened 2 tables on each and it worked as expected so i can't reproduce your problem. try what i mentioned above, if that doesnt work, well set up a skype/TV session

Quote

09-03-2010 , 05:33 PM

#1506

greg nice

Carpal \'Tunnel

Join Date: Aug 2004 Posts: 9,990

Quote:

Originally Posted by r0eKY

ap/pf/yes but it doesn't move to grid at the start when the post blinds button pops up . It did before the update/yes

thanks

just tested, works for me, using AbsoluteTEST.ini that someone contributed, and using the top view tables in the client

do you have UB included in SaT as well? that might cause a conflict..

Quote

09-03-2010 , 05:51 PM

#1507

mv540

grinder

Join Date: Sep 2005 Posts: 489

Greg, would it be possible to have tables go into a grid when I go all-in, while also having a hotkey to move them over when I want? This would probably mainly be a tool for SNG players.

Quote

09-03-2010 , 06:13 PM

#1508

greg nice

Carpal \'Tunnel

Join Date: Aug 2004 Posts: 9,990

v 1.99.13

v 1.99.13
- changed: RButton hotkey asks if you want to pass thru rightclicks or not link
- fixed: stack only tables popping back to grid when passed thru link
- fixed: bring urgents to top in VPIP mode
- added: stack all tables hotkey link
- added: tile all tables hotkey
- added: failsafe hotkey ctrl+shift+alt+Q to insta quit SaT
- added: vpip mode left click detection .. work work on party, or any custom sites for now

http://www.stackandtile.com/sat

again, this version has some biggish internal changes. the biggest is that VPIP mode will now recognize when you click a VPIP button. this won't work for your custom sites for now, and not on party either since i can no longer test on there. but, once i get some feedback that this feature works reliably, then support will be extended out to other sites

Quote

09-03-2010 , 09:41 PM

#1509

betweaver

centurion

Join Date: Aug 2008 Posts: 133

great! can we still use our ini files from v.12?

Quote

09-04-2010 , 01:39 AM

#1510

greg nice

Carpal \'Tunnel

Join Date: Aug 2004 Posts: 9,990

you can try, no guarantees

Quote

09-04-2010 , 02:04 AM

#1511

pmania

centurion

Join Date: Feb 2008 Posts: 111

TY very much, I got it working now finally on Full Tilt. I needed to answer no to right click to fold + stack. And now it folds and moves the table to stack, the previous version would only move the stack and then it would reappear.

Although I don't understand why it works now, cause I didn't understand the question which I answered with no.

Quote

09-04-2010 , 04:05 AM

#1512

betweaver

centurion

Join Date: Aug 2008 Posts: 133

works without any of the previous hitches, except ONCE it brought a table into the grid that did not require action.

Quote

09-04-2010 , 07:33 PM

#1513

greg nice

Carpal \'Tunnel

Join Date: Aug 2004 Posts: 9,990

Quote:

Originally Posted by mv540

Greg, would it be possible to have tables go into a grid when I go all-in, while also having a hotkey to move them over when I want? This would probably mainly be a tool for SNG players.

sure, use tile setting VPIP, turn off left click detection in advanced options, set up a VPIP hotkey in SaT coorresponding to your "all-in" hotkey in TableNinja or the like

for hotkey to move the table as you please, set up a "manual move" hotkey in SaT

Quote

09-05-2010 , 06:02 AM

#1514

Joaggi

grinder

Join Date: May 2008 Posts: 291

hey greg, first of all great job your script helps me a lot.

I use Stars with Ninja and tile prf setup with 6 slots on a
24.

unfortuanely iam having two problems:

1) sometimes when a table automatically opens from waiting list to the new table slot, the table doesnt resize and doesnt buy me in. Strange that it happens only from 6 times once.

2) yesterday i updated stack and tile ( before i had the oldest one), using the old setup ini. tile mode is different now, the tables are moving to free slots before i have to act. but i prefer like in the old version that the table only moves when iam to act.

i hope u can help me and thanks

Quote

09-05-2010 , 10:41 AM

#1515

ilikeaces86_

veteran

Join Date: Feb 2005 Posts: 2,570

Is there a workaround to get this to work with bodog and prima?

Quote

09-05-2010 , 11:01 AM

#1516

greg nice

Carpal \'Tunnel

Join Date: Aug 2004 Posts: 9,990

Quote:

Originally Posted by Joaggi

1. if i understand you correctly, pokerstars resizing is very shaky and resource intensive. if this ever happens, you will have to just press F5 yourself to instruct stars to redraw its tables

2. i dont know how old your old version was, but there have been changes recently. i would say just create a new setup and include your sites again. everything should work the same in preflop tile mode

Quote

09-05-2010 , 11:02 AM

#1517

greg nice

Carpal \'Tunnel

Join Date: Aug 2004 Posts: 9,990

Quote:

Originally Posted by ilikeaces86_

Is there a workaround to get this to work with bodog and prima?

please see the website. as of right now it wont work with VPIP left click mode, but there are configs for those two sites to work to tile table on preflop action

Quote

09-05-2010 , 12:35 PM

#1518

greg nice

Carpal \'Tunnel

Join Date: Aug 2004 Posts: 9,990

i'm really looking for some feedback on the VPIP mode when you click a VPIP button with the mouse..

Quote

09-05-2010 , 07:23 PM

#1519

pmania

centurion

Join Date: Feb 2008 Posts: 111

Is this program compatible with holdem manager ? Cause when I want to use the hud from holdem manager it stopped working, right clicking=fold to stack stopped working. The right menu from ft came up also, I am playing both ft and pokerstars and also have the tableninja trials running. I had holdem manager running but not importing as soon as I wanted to see someones stats I started the importing and everything stopped working, going to reboot now since disabling the hud through table manager doesn't work anymore. Hmmm it seems table manager is causing it or hmhud.exe! Closing table manager caused stack and tile to work again, going to use PT3 then for the time being.

Quote

09-05-2010 , 07:47 PM

#1520

greg nice

Carpal \'Tunnel

Join Date: Aug 2004 Posts: 9,990

can you try running SaT as administrator and tell me if that fixes it?

Quote

09-06-2010 , 12:26 AM

#1521

Fuketsu

centurion

Join Date: Dec 2009 Posts: 112

I can't get SaT to work with Partys SnGs, it doesnt recognizes them at all

niether stacked or tiled, it says I have 0 tables open, is there support for sngs? if not, anyone knows a good ahk like SaT for partys sngs?

Quote

09-06-2010 , 12:28 AM

#1522

greg nice

Carpal \'Tunnel

Join Date: Aug 2004 Posts: 9,990

party support is on hold since they no longer even let me log in for a play money account to test. if/when i can log in again, party will be supported

complain to them for being so stupid

preflop mode should still work on party, but if it doesn't, you can always try creating your own custom site via the tutorial on the website and looking at other users custom sites for ideas

Quote

09-06-2010 , 12:37 AM

#1523

Fuketsu

centurion

Join Date: Dec 2009 Posts: 112

It does work pre, but only for cash, no idea whats up with sngs, ill check out the tuts, thx

EDIT:

Well, I was checking the tutorials and custom sites, but all we would need to add in this cases is table size and fold button position, which I already have from cash tables in party, so I guess the question is how do I get it to recognize the SnGs table with that same config.

Quote

09-06-2010 , 01:21 AM

#1524

greg nice

Carpal \'Tunnel

Join Date: Aug 2004 Posts: 9,990

hrmm. if it works for cash, then its probably the table_title parameters that are different for sngs

heres whats used internally by SaT

Code:

use_lobby_pid_for_tables=1
lobby_title_text=PartyPoker.com: Poker Lobby
table_exclude_title_text=Lobby
table_include_title_text=/

so if you create your own custom site ini, youll need those settings above, along with the table size and fold button position

youll need to change "table_include_title_text" for some text that is in your sng title bar. currently its just "/" which i would think should work for sngs, since sngs titlebar has to display blind level yes? but if its not, youll have to tweak it

Quote

09-06-2010 , 03:31 AM

#1525

jogden139

banned

Join Date: Mar 2008 Posts: 1,995

havent gotten everything working smoothly yet,
I don't see this:

Quote:

Originally Posted by greg nice

then you can set up hotkeys in SaT, youll need a "stack" table hotkey to move tables to the stack (initially none will be in the stack when you press Start). you'll also want a "manual move to grid" hotkey, that way you dont have to drag each table over, you can just send the hotkey to move it, and then send the stack hotkey to move it back

then you'll need to Include Site for both stars and ftp. follow the directions here for when the fold button is visible

keep clicking save after each thing you change just to be safe.

youll need to configure stars and ftp as described on this page:
http://stackandtile.com/sat/node/11

you should be good to go. this program was designed for a few specific purposes and yours is one. obviously test on play money first. some people ran into problems mega tabling, so if you want to do some tests with 30-40 tables i'd be interested in seeing how it goes. i hope SaT can keep up