Hrmmm, how are you importing the Chico hands into your PT4/HUD? Does PT4 natively support Chico? I remember some people were having problems in the past when they were using Hand Grabbers which convert the Chico hands into PokerStars format, in order for the tracking software to be able to process them. This would usually only be a problem is you also have a PokerStars site included into SaT.

As for hotkeys not working when the mouse is over the HUD, that is something that I can't really control. It depends on how the HUD is developed, whether its overlay windows are transparent, and things like that.

Yes, if you are cycling thru non-urgent tables, and then suddenly a table becomes urgent, then it will pop to the top, and you might be at risk of a misclick.

There is a way to prevent tables from coming to the top of the stack. Its an extra advanced option that you'd have to add to your layout config file. But I hardly ever recommend people use it, and it hasn't been tested thoroughly. But you could try it if you want. Add this line to your config file:

And then you could set up a hotkey to "Activate most urgent table". But realize that if the most urgent table is in the grid, then this hotkey will just focus and activate that table in the grid, and any urgent tables in the stack might remain buried, since they aren't the MOST urgent.

There is no real good solution to this. I'd recommend not doing the above for now, and instead just trying a session or two at low stakes, and see just how frequently you run into that potential misclick problem. It might not actually happen.

You should be fine with 125% scaling. Yes the poker tables would be larger, but because they are larger they would also take up more screen space.

It should work fine with SaT. The only caveat is if you are running multiple monitors. In which case, you'd need to set a "custom scaling" within Windows and choose 125% which would then cause all of your monitors to be 125%. See the FAQ page for your version of windows for how to configure this:

http://www.stackandtile.com/sat/help/faq

And if you do this, you should Remove and re-Include your sites. You may even need to make a new layout for new grid slot sizes.

Are you guys sure you're on v2.95m? What version does it say on the About tab? And did you Remove the site from SaT, and then re-Include it?

Both of the problems you describe happens when SaT thinks that the site always requires action. All problems related to detection of action required can usually be solved by running the Test and solutions on this help page:

http://www.stackandtile.com/sat/help...op-incorrectly

Please let me know, because its working for me on my machine

Is there anyway to instead of cycling stack forward/backward cycle to the next most urgent table in line? Like say I get a difficult decision on the table that pops to the top of the stack. I'd like to maybe cycle to another urgent table within the stack make that decision and then have it come back to that most urgent table.

If not I think what I may do is only hold four tables in a grid and have one open slot and a stack. In that case I imagine as long as I have that open space free I'll be able to cycle through my stack and make the easier fast folds avoiding any misclicks.

I don't think I want to try the other method you mentioned because I still like the idea of urgent tables popping to top.

Hmmmm, no there is no way to cycle through the tables requiring action. But the "cycle stack" hotkeys do allow you to cycle away from an urgent table that pops to the top. And as soon as you act on ANY urgent table, then SaT would see that the next most urgent has changed, and would bring a table back to the top of the stack.

That sounds like a good solution

Ok. Thanks. So urgent tables are any table with buttons showing. Say I have a table with the Fold Call Raise buttons showing on top of my stack and then I cycle forward or back with my hotkeys. You are saying if I find another table with Fold Call Raise and make an action that then that old "urgent table" that I passed up on with jump back to the top. IF I don't come across any urgent tables only ones where I fast fold by clicking the fold check box I assume that original urgent table will just time out.

Which hotkey should I use to bring up the most urgent table in that case?

Btw, I have these in the settings

send_new_tables_to_bottom=1
send_to_bottom_on_stack=1

They will not cause any issues will they?

Also, would just like confirmation that when I cycle away from the top urgent table that no new urgent tables will ever pop to the top creating that possible misclick situation that we were discussing earlier.

If that's true then I think it should be possible to cycle away from an urgent table make some folds, whatever and then hotkey back to the most urgent table, no?

Right, that's what should happen.

There is only the hotkey to "Activate Most Urgent Table". If the 'most' urgent table is a table in the grid, then it will just bring focus to that table, which means any urgent tables in the stack will still be hidden underneath if you had cycled away, and you'd need to cycle back through to find them. But, if you took action on that most urgent table in the grid, then the urgent in the stack would be brought back to the top.

I don't see how they would cause any issues

Another thing, are you guys using the 3-color action buttons as mentioned on the PartyPoker help page?

http://www.stackandtile.com/sat/help/partypoker

http://www.stackandtile.com/sat/party1.png

If not, make sure to turn that on, and then Remove and re-Include the site. Let me know if that was the problem.

I did everything you said in the first quote, but it works now after activating the 3-color action button. Thank you!

good to know. Another user also had the same problem, and the 3-color action buttons has solved it.

ye same here, 3 color buttons fixed problem, after party update its unchecked as default

Hi Greg,

I cannot include site partypokermodern at the moment. When I try to include site, F9 detecting and resizing window works, but F10 fold didn't work. Tried various layout options with different windows sizes.
I have SAT version 2.95, unchecked all the options indicated in the help menu, enabled 3-color button.

If you need further information, please let me know. I can PM you as well.

Thank you for your time in adavance,

Arya1110

Please see here:

http://www.stackandtile.com/forum/sh...d=8728#pid8728

Replied to your reply of my email but here might be the cause of the issue.

You mentioned in your email that Alt+Tab in Windows brings up the windows shortcuts and then asked about my hotkeys within stackandtile.

I actually use !a, !b, !c, !d, !e, and !f as hotkeys within stackandtile which are mapped to six extra spare keys on my logitech gaming keyboard.

I don't know if this is causing the issue or/even stackandtile. As I said in the email strange things happen all around and I'm not even able to type with the alphabet characters in my poker clients or within windows. It's probably an issue with the gaming keyboard itself but since it only seems to ever happen when I'm using stackandtile I'm thinking it's connected in some way with the compatibility between the two.

Let me know if you have any ideas. Thanks.

I replied via email, but I'll copy it here for reference:

Yes the ! is the alt key. This may be the issue. So I'm guessing that you've have G1 on your gaming keyboard mapped to Alt+A in your logitech drivers or something? And then in SaT you use !a for your hotkey key. That would make sense.

Perhaps the keyboard isn't fully releasing the alt key or something when it remaps it. On most windows, pressing the Alt key alone brings up the menu at the top (File, Edit, View, etc) and then you can either use the underlines keys as shortcuts or the arrow keys to navigate. If the Alt key is getting stuck down for some reason, that might be why you can't type in some instances.

Can you remap the G1-G6 keys to whatever keys you want? If so, we could try using different keys and seeing if that solves your issue. Most keyboards don't have physical F13-F24 keys, but those keys still "exist" in terms of Windows, so maybe you could map G1-G6 to F13-F18, and then use F13-F18 for your SaT hotkeys.

Downloaded a trial version.

I've set up Ignition as a site. Sometimes my Ignition windows registers, sometimes they don't. E.g. one Ignition window will float around, while others are stack.

yeah BodogIgnition can be troublesome sometimes

the only reason the tables would float around and not be detected by SaT is if there was an error. are you seeing any error msg popups, such as FAILURE RESIZING errors?

can you try downloading and installing this version v2.95p and tell me if its any better?

http://www.stackandtile.com/sat/tmp/...Setup-295p.exe

Having troubles with party poker, Keep getting this message for all my tables

Also try to add party poker to a new layout and when i click F10 it does not fold my hand.

Thanks for the help as always!

Yeah Party put out an update in the past week or two. Can you please try downloading this version v2.95p

http://www.stackandtile.com/sat/tmp/...Setup-295p.exe

Remove PartyPokerModern and re-Include it and tell me if it works

perfect looks like it works now thanks

What is the best solution to get ignition working? feel like I can't even use S&T because it won't work for ignition

What exactly isn't working? It should be functional at this point.

v2.96

http://www.stackandtile.com/forum/sh...d=8827#pid8827

http://www.stackandtile.com/sat/download

I was mistaken! Seems like everything is working perfectly at the moment for me. Problem was I had stack AND tile enabled, when I should have had only Tile enabled.