Two Plus Two Publishing LLC Two Plus Two Publishing LLC
 

Go Back   Two Plus Two Poker Forums > >

Notices

Commercial Software Discussion of commercial gambling-related / poker software & commercial graphics modifications

Reply
 
Thread Tools Display Modes
Old 08-27-2017, 09:13 PM   #7626
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,252
Re: StackAndTile

Quote:
Originally Posted by norfair18 View Post
America's cardroom doesnt work when you are in the BB and there is an allin ahead of you. Does not snap to the grid. Also generally just works inconsistenly.
Can you please run though this Test and specifically for the scenario when facing an all-in? You can simulate the all-in situation on Play Money by just betting 99% of your stack and then folding. And then next hand you'll always be facing all-in

There are also potential solutions on this page for you to try:

http://www.stackandtile.com/sat/help...op-incorrectly

Let me know the results and we'll go from there
greg nice is offline   Reply With Quote
Old 08-29-2017, 02:56 AM   #7627
dripdrop
journeyman
 
Join Date: Aug 2009
Posts: 289
Re: StackAndTile

Just wanted to add to the gratitude for getting out v2.94 so quickly following the ignition update. I've had an issue where maybe 1/15 tables refuses to resize and is ignored but un-ignoring fixes it no prob. Besides that the program is working fantastically as usual, unlike most ignition-related things lol. Thanks again
dripdrop is offline   Reply With Quote
Old 08-29-2017, 10:27 AM   #7628
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,252
Re: StackAndTile

Quote:
Originally Posted by dripdrop View Post
Just wanted to add to the gratitude for getting out v2.94 so quickly following the ignition update. I've had an issue where maybe 1/15 tables refuses to resize and is ignored but un-ignoring fixes it no prob. Besides that the program is working fantastically as usual, unlike most ignition-related things lol. Thanks again
You mean the dev version v2.94s, shortly I will put out the final release v2.95

But yes thanks, please tell your friends! That resizing issue is a big problem that I can't seem to eliminate, and I don't think I will be able to unless they put out an update fixing it themselves
greg nice is offline   Reply With Quote
Old 08-29-2017, 02:16 PM   #7629
HollywoodHogan
old hand
 
Join Date: Oct 2010
Posts: 1,959
Re: StackAndTile

I've upgraded to 2.94t and an Ignition table can be detected using the DWM scan mode, but I'm unable to set up hotkeys when I get to the 2nd step, F10 to fold. I've tried removing/adding the site four times with each scan mode, but none of them work. DWM is the only one that detects a table, but there is zero functionality after that.
HollywoodHogan is offline   Reply With Quote
Old 08-29-2017, 08:36 PM   #7630
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,252
Re: StackAndTile

Quote:
Originally Posted by HollywoodHogan View Post
I've upgraded to 2.94t and an Ignition table can be detected using the DWM scan mode, but I'm unable to set up hotkeys when I get to the 2nd step, F10 to fold. I've tried removing/adding the site four times with each scan mode, but none of them work. DWM is the only one that detects a table, but there is zero functionality after that.
During Include Site setup, F9 to detect the table has no bearing on what Scan Mode you choose. So that should always succeed.

F10 to Fold should always Fold your hand, but if you get the "Button detected as black" error, then that would be affected the Scan Mode.

What version of Windows are you using?
greg nice is offline   Reply With Quote
Old 08-29-2017, 11:00 PM   #7631
HollywoodHogan
old hand
 
Join Date: Oct 2010
Posts: 1,959
Re: StackAndTile

Right, I get the button detected as black error. Windows 10, but I've been having issues with it lately. Apparently, I had a wonky version and my license isn't activated now. That would prevent StackandTile from functioning? I never would have guessed.
HollywoodHogan is offline   Reply With Quote
Old 08-30-2017, 12:07 AM   #7632
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,252
Re: StackAndTile

Quote:
Originally Posted by HollywoodHogan View Post
Right, I get the button detected as black error. Windows 10, but I've been having issues with it lately. Apparently, I had a wonky version and my license isn't activated now. That would prevent StackandTile from functioning? I never would have guessed.
With Win10, if its failing with DWM scan mode, then you'd need to try PW scan mode as suggested.

If your license is expired and your trial period is expired too, then SaT won't work to pick up any tables when you press Start. But it should still allow you to Include the site without issues
greg nice is offline   Reply With Quote
Old 08-31-2017, 01:15 AM   #7633
HollywoodHogan
old hand
 
Join Date: Oct 2010
Posts: 1,959
Re: StackAndTile

Are you referring to my Windows license or SaT?

SaT works with play money but not real money. What's up with that? I definitely have a valid SaT license, at least I should because I was just charged for it.
HollywoodHogan is offline   Reply With Quote
Old 08-31-2017, 02:09 AM   #7634
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,252
Re: StackAndTile

Quote:
Originally Posted by HollywoodHogan View Post
Are you referring to my Windows license or SaT?

SaT works with play money but not real money. What's up with that? I definitely have a valid SaT license, at least I should because I was just charged for it.
I'm referring to your SaT license. Did you input your license code correctly? Click on the About tab and then click the Register button. PM me and tell me what license code you're using and also your registered email address
greg nice is offline   Reply With Quote
Old 09-05-2017, 02:31 AM   #7635
dripdrop
journeyman
 
Join Date: Aug 2009
Posts: 289
Re: StackAndTile

I just upgraded from win7 to 10 and removed/re-added the BodogIgnition configuration for Ignition. I'm now having an issue where the program doesn't seem to be recognizing when a table in the stack requires action, or when I've entered a pot and there's a flop. Also if I try to manually select a table within the stack where I know action is required (using taskbar icon previews), the table that was originally visible will instantly snap back to the top of the stack. Other sites (ACR, carbon, betonline) seem to be working fine.

I've tried changing the scan modes as well as removing/re-adding the configuration several times (ensuring that I'm clicking the solid white area of the hole/flop cards). Any idea what the problem could be? Thanks
dripdrop is offline   Reply With Quote
Old 09-05-2017, 03:50 AM   #7636
dripdrop
journeyman
 
Join Date: Aug 2009
Posts: 289
Re: StackAndTile

Quote:
Originally Posted by dripdrop View Post
I just upgraded from win7 to 10 and removed/re-added the BodogIgnition configuration for Ignition. I'm now having an issue where the program doesn't seem to be recognizing when a table in the stack requires action, or when I've entered a pot and there's a flop. Also if I try to manually select a table within the stack where I know action is required (using taskbar icon previews), the table that was originally visible will instantly snap back to the top of the stack. Other sites (ACR, carbon, betonline) seem to be working fine.

I've tried changing the scan modes as well as removing/re-adding the configuration several times (ensuring that I'm clicking the solid white area of the hole/flop cards). Any idea what the problem could be? Thanks
Nm think I got it, going back through the win10 troubleshooting page and running ignition in win7 compatibility mode looks to be working
dripdrop is offline   Reply With Quote
Old 09-05-2017, 08:08 AM   #7637
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,252
Re: StackAndTile

Quote:
Originally Posted by dripdrop View Post
I just upgraded from win7 to 10 and removed/re-added the BodogIgnition configuration for Ignition. I'm now having an issue where the program doesn't seem to be recognizing when a table in the stack requires action, or when I've entered a pot and there's a flop. Also if I try to manually select a table within the stack where I know action is required (using taskbar icon previews), the table that was originally visible will instantly snap back to the top of the stack. Other sites (ACR, carbon, betonline) seem to be working fine.

I've tried changing the scan modes as well as removing/re-adding the configuration several times (ensuring that I'm clicking the solid white area of the hole/flop cards). Any idea what the problem could be? Thanks
It sounds like SaT is just always thinking that the tables are requiring action. This would explain why, when you try to click on another table through the taskbar, the original table snaps back to the top. Because SaT is thinking that original table still requires action (even though it doesn't). Usually you would go through this page to troubleshoot that:

http://www.stackandtile.com/sat/help...op-incorrectly

However, on Win10 I'm pretty sure you would need to use PW scan mode for this new BodogIgnition update. And then try to Remove and re-Include the site

Quote:
Originally Posted by dripdrop View Post
Nm think I got it, going back through the win10 troubleshooting page and running ignition in win7 compatibility mode looks to be working
Hrmmm ok, if its working, then thats good. I hadn't tried running the software in compatibility mode, so that's good to know.

Please run that Test on the page above just to be sure that SaT is detecting when action is required properly
greg nice is offline   Reply With Quote
Old 09-05-2017, 04:37 PM   #7638
dripdrop
journeyman
 
Join Date: Aug 2009
Posts: 289
Re: StackAndTile

Quote:
Originally Posted by greg nice View Post
It sounds like SaT is just always thinking that the tables are requiring action. This would explain why, when you try to click on another table through the taskbar, the original table snaps back to the top. Because SaT is thinking that original table still requires action (even though it doesn't). Usually you would go through this page to troubleshoot that:

http://www.stackandtile.com/sat/help...op-incorrectly

However, on Win10 I'm pretty sure you would need to use PW scan mode for this new BodogIgnition update. And then try to Remove and re-Include the site



Hrmmm ok, if its working, then thats good. I hadn't tried running the software in compatibility mode, so that's good to know.

Please run that Test on the page above just to be sure that SaT is detecting when action is required properly
Yeah I hadn't seen that test page before posting, you're right that SaT was thinking that the table constantly required action as it was failing the test. I haven't played a full session yet but changing the win10 settings (win7 compatibility mode and override high DPI scaling) seems to have worked without needing to switch to PW scan mode. I'll update if there's an issue when I play next that isn't fixed by switching to PW and removing/re-including.
dripdrop is offline   Reply With Quote
Old 09-05-2017, 09:35 PM   #7639
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,252
Re: StackAndTile

Ok cool
greg nice is offline   Reply With Quote
Old 09-08-2017, 09:05 PM   #7640
xmarxthespot22
grinder
 
Join Date: Apr 2008
Posts: 429
Re: StackAndTile

hi greg is there an update for the new bovada update where the tables keep movin around and resizing?
xmarxthespot22 is offline   Reply With Quote
Old 09-09-2017, 11:42 AM   #7641
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,252
Re: StackAndTile

Quote:
Originally Posted by xmarxthespot22 View Post
hi greg is there an update for the new bovada update where the tables keep movin around and resizing?
I haven't found one yet. Can you try using 100% scaling in Windows and tell me if that fixes it?

Hurricane is coming so I will probably not be availalble for a while
greg nice is offline   Reply With Quote
Old 09-09-2017, 07:33 PM   #7642
xmarxthespot22
grinder
 
Join Date: Apr 2008
Posts: 429
Re: StackAndTile

stay safe..

Last edited by xmarxthespot22; 09-09-2017 at 07:38 PM.
xmarxthespot22 is offline   Reply With Quote
Old 09-10-2017, 02:37 AM   #7643
dipandglide
journeyman
 
Join Date: Jul 2009
Posts: 360
Re: StackAndTile

I'm having an issue with table slots not showing up on my monitors (they're open, but magically offscreen). I've exhausted most normal options with other windows and am having no luck. If anyone knows a work around it would really be appreciated. Thanks
dipandglide is offline   Reply With Quote
Old 09-10-2017, 05:45 PM   #7644
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,252
Re: StackAndTile

Quote:
Originally Posted by dipandglide View Post
I'm having an issue with table slots not showing up on my monitors (they're open, but magically offscreen). I've exhausted most normal options with other windows and am having no luck. If anyone knows a work around it would really be appreciated. Thanks
Just use the minus button and reduce the slots down the the visible ones, and then use the plus button to add them back, and then use Visualize Grid to place them
greg nice is offline   Reply With Quote
Old 09-12-2017, 01:02 PM   #7645
SirSpewAlot
newbie
 
Join Date: Dec 2011
Posts: 28
Re: StackAndTile

I cant prefold on Winamax it doesn't tick the box, what can I do?
I'm played tiled and I have a fold(and stack ) hotkey and the site is Winamax small.
SirSpewAlot is offline   Reply With Quote
Old 09-12-2017, 03:10 PM   #7646
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,252
Re: StackAndTile

Quote:
Originally Posted by SirSpewAlot View Post
I cant prefold on Winamax it doesn't tick the box, what can I do?
I'm played tiled and I have a fold(and stack ) hotkey and the site is Winamax small.

Thank you, I see the problem too. Can you please download this version v2.94v

http://www.stackandtile.com/sat/tmp/...Setup-294v.exe

and test it and tell me if that fixes it?
greg nice is offline   Reply With Quote
Old 09-17-2017, 02:54 PM   #7647
xmarxthespot22
grinder
 
Join Date: Apr 2008
Posts: 429
Re: StackAndTile

Anything on the latest bodog/ignition messed up? The tables pop into the box but then start moving and changing sizes. Then an error code comes up saying it has tried to resize the table 3 times but didnt work so now the table will be ignored.
xmarxthespot22 is offline   Reply With Quote
Old 09-17-2017, 03:17 PM   #7648
isunkurbttlship
Pooh-Bah
 
isunkurbttlship's Avatar
 
Join Date: Mar 2010
Posts: 5,573
Re: StackAndTile

Quote:
Originally Posted by xmarxthespot22 View Post
Anything on the latest bodog/ignition messed up? The tables pop into the box but then start moving and changing sizes. Then an error code comes up saying it has tried to resize the table 3 times but didnt work so now the table will be ignored.
Getting this too so I haven't been using the software for a while now.
isunkurbttlship is online now   Reply With Quote
Old 09-17-2017, 09:20 PM   #7649
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,252
Re: StackAndTile

Quote:
Originally Posted by xmarxthespot22 View Post
Anything on the latest bodog/ignition messed up? The tables pop into the box but then start moving and changing sizes. Then an error code comes up saying it has tried to resize the table 3 times but didnt work so now the table will be ignored.
Quote:
Originally Posted by isunkurbttlship View Post
Getting this too so I haven't been using the software for a while now.
There is nothing new.. Their software is messed up and I haven't figured any way around it. When I drag and drop a table, the table resizes itself on the drop. That happens even without SaT. Does that happen for you guys? Until they fix that, there is not much I can do...
greg nice is offline   Reply With Quote
Old 09-18-2017, 01:20 AM   #7650
isunkurbttlship
Pooh-Bah
 
isunkurbttlship's Avatar
 
Join Date: Mar 2010
Posts: 5,573
Re: StackAndTile

Quote:
Originally Posted by greg nice View Post
There is nothing new.. Their software is messed up and I haven't figured any way around it. When I drag and drop a table, the table resizes itself on the drop. That happens even without SaT. Does that happen for you guys? Until they fix that, there is not much I can do...
Currently have no issues with that. Have been able to drag the tables to different parts of my monitor without them resizing at all. On windows 7 with scaling at 100%.
isunkurbttlship is online now   Reply With Quote

Reply
      

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Forum Jump


All times are GMT -4. The time now is 11:21 PM.


Powered by vBulletin®
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © 2008-2010, Two Plus Two Interactive
 
Poker Players - Streaming Live Online