Popping up where? What are your play mode and move to grid settings?

Run the Test on that page for each of your sites in SaT and confirm its working correctly.

And also make sure that each site's focus stealing option is turned off.

hi. i have added a custom site to stack and tile (hive poker). when i start SaT the table on that site bounce from one slot to another. how can i get that fixed?

the next version will have support for HivePoker built-in

please download this test version and try it out:
http://www.stackandtile.com/sat/tmp/...Setup-290j.exe

remove your custom site, then look for new site "HivePoker" and Include that.

perfect. thanks

let me know how it works for you

Hello, I am on the trial and liking it so far.
Is it possible when moving tables from the stack to have them resize a bit smaller when they move to the slot?

In other words have 1 size for the stack and a smaller size for the grid.

Also, is it possible to not have it auto move out of stack when checking the bb option or checking after the flop assuming you checked bb option, but still auto move out of stack when you put money in the pot?

Thanks

unfortunately all slots must be the same size. this feature is requested every so often, and its possible i change this in the future. but at the moment its not possible

i guess you're using "Move to Grid = After entering pot", hrmmm no this is not possible either. i dont think this has ever been requested before. pretty much if you click the 2nd/middle button, SaT thinks that you're clicking 'call'. its hard to distinguish when that button is really the 'check' button without trying to read the screen

I have certain hotkeys set up and everything works fine but when I start another session up later after leaving SAT running but turned off and turn it back on. Some hot keys don't work sometimes. Mainly I have the scroll on mouse as hot key to scroll thru the stack games and that often quits working.

If I shut down SAT and then restart it then it works.

what is the specific hotkey that you're using? "Cycle stack forward/backward"?

Yes. Up for forward and down for back.

hrmmm. you're sure the program was turned off (you pressed the Stop button)? because when Start is pressed again, the cycle stack list gets reset

can you also set up "Cycle Stack forward/back" hotkeys for regular keyboard keys? and then when you notice the Wheel failing, you can try the keyboard keys to see if that matters at all?

Yea, the only thing is I always have several webpages open and while playing poker and using SAT it won't let me use the scroll feature for the websites because that is a hot key.
So somehow that might be causing the problem.

no, thats normal. while SaT is running, all of the hotkey keys and mouse buttons are dedicated to the SaT features. you can easily test that by setting up keyboard keys and seeing that they won't work while SaT is running. people usually run into this issue when using keyboard keys and then trying to chat or take notes.

so if your webpages were still blocked from scrolling, then perhaps you hadn't clicked Stop. but still i don't see why those Cycle hotkeys would fail..

you can prefix each keyname with the ~ character, which will then pass the key through after SaT's hotkey command. but this doesn't always work well, so i usually recommend to not use it. but you could try it if you wanted to and see. you would use "~WheelUp" instead of "WheelUp" as the keyname.

alternatively you could set up a hotkey toggle to "Disable Hotkeys" which is what i usually recommend

i have trouble only with partypoker and ACR, software doesnt detect the tables when is an open shove so i have to manually drag the window from the stack to play.
any solution? thx

For me any time I click the enter key for my bet instead of using the mouse to click the be button it won't move it out of stack. I have to make sure to use the mouse to click the button.

SaT uses 2 methods to detect whether action is required. First, it checks for the visibility of the betbox. The betbox is visible most of the time, except when facing an allin. So, the next thing SaT looks for is the visibility of the fold/call/bet buttons (in the case of party/wpn, SaT looks for the 'call' button).

So, I'd suggest you first Remove and re-Include the sites and run this Test on play money. Play money is easy because you can bet 99% of your stack, and then Fold to a shove. And then the next hand you'll be facing an all-in

http://www.stackandtile.com/sat/help...op-incorrectly

If it still doesn't work after trying those solutions, can you provide screenshots of the tables when the fold/call/bet buttons are visible? And are you using any custom table graphics mods?

You're using "Move to Grid" = "After entering pot" ?

I definitely overlooked that scenario! I'm very surprised no one has mentioned that before. I will look into this and see if there is a way to do it. I'll let you know

Yes, ok cool. Its when I manually type in my bet, I do that a lot if its not a standard spot, and then just hit enter on the keypad.

here, i put together a quick test build, v2.90m:

http://www.stackandtile.com/sat/tmp/...Setup-290m.exe

please test it out, both with the normal Enter key as well as the NumpadEnter key. there is a slight delay to help increase the reliability of the detection. let me know how it works.

Just did a short test and it appears to work great. Works whether I manually enter bet and hit enter or whether I click the bet button.

So that version just overwrote my old one right? So I will open from same SAT desktop icon I have been using and this new version will work right?

Also, I recently tried the "move mouse to active table" in the settings and that works great when I have tables scattered around that I have active situations on that moved from the stack, but if I have just in the stack with my pointer right on the fold button and rapidly clicking fold as that come up then the pointer moves up a couple inches and I have to move it back down.

Is there a way you can make it so that if you hovering over the stack with no grid tables open at the moment, that the pointer stays right where you have it pointed(on the fold button) or some other way that makes sense.

great

yep exactly. you can confirm that by checking the version on the About tab

another good suggestion, keep an eye out in the thread

alright try this:

v2.90n:

http://www.stackandtile.com/sat/tmp/...Setup-290n.exe

- if the mouse is over a table in the stack, it won't trigger the 'move mouse' action

test it and let me know if you find any quirks

Great, I will check it out probably tomorrow. Thanks.

I just tested it out and it appears perfect.
Wherever the pointer is, if over a stack table, it doesn't move if the next table is a stack table. If next table is a grid table then it moves to that table, which is what I wanted.

And of course it moves from grid to stack also.
Thanks

great!