Two Plus Two Publishing LLC
Two Plus Two Publishing LLC
 

Go Back   Two Plus Two Poker Forums > >

Notices

Commercial Software Discussion of commercial gambling-related / poker software & commercial graphics modifications

Reply
 
Thread Tools Display Modes
Old 08-08-2014, 11:09 AM   #5351
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,457
Re: StackAndTile

Quote:
Originally Posted by LoveFish2013 View Post
When my tables begin it doesnt start where my stack slot is.
Tables initially move to your New Tables location.
http://www.stackandtile.com/sat/help/table-types

Quote:
Second is I have the setting after entering pot move to grid but that doesnt work.
What happens instead?
The Move To Grid setting is for moving tables out of the stack. If you cannot get tables into the stack then of course thats not gonna work.

Quote:
Also the stack doesnt work either.
What exactly 'doesn't work'? Many people use this software, so it probably works. When something breaks, usually a bunch of people are fast to post about it in here. Perhaps you aren't using it correctly. How are you attempting to put tables into the stack?
greg nice is offline   Reply With Quote
Old 08-08-2014, 11:43 AM   #5352
LoveFish2013
journeyman
 
Join Date: Feb 2013
Posts: 346
Re: StackAndTile

Hi greg,

Thanks for the fast reply.
I dont know if im doing something wrong. I just followed the instructions to set it up. The tables dont go to the stack slot and when I enter the pot it just keep on the same spot. Also the table doesnt come in front of the screen but keeps behind another table that is not active.

Thanks
LoveFish2013 is offline   Reply With Quote
Old 08-08-2014, 12:52 PM   #5353
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,457
Re: StackAndTile

Quote:
Originally Posted by LoveFish2013 View Post
Hi greg,

Thanks for the fast reply.
I dont know if im doing something wrong. I just followed the instructions to set it up. The tables dont go to the stack slot and when I enter the pot it just keep on the same spot. Also the table doesnt come in front of the screen but keeps behind another table that is not active.

Thanks
Did you follow the Walkthrough completely?

Please run this Test and see if it works for you:
http://www.stackandtile.com/sat/help...not-stay-stack
greg nice is offline   Reply With Quote
Old 08-10-2014, 02:24 PM   #5354
MalloryPoker
journeyman
 
Join Date: Mar 2010
Location: Taylor TX
Posts: 207
Does this work with full flush?
MalloryPoker is offline   Reply With Quote
Old 08-10-2014, 04:50 PM   #5355
FeelThePower
journeyman
 
FeelThePower's Avatar
 
Join Date: Oct 2011
Location: Phuket, Thailand
Posts: 391
Re: StackAndTile

On Winamax you can not use fold hotkey to fold in advance. Only when it is your turn to act.
Would prefer to have option to fold in advance also on Winamax if that is not a big problem for You to implement.

Also quick question about layout. I want to have some tables in stack and other tables tiled around stack.

These will be correct settings for that?
And also which hotkey i should use to take tables out from stack to tiled layout? "Keep table in grid" or "Move table to next slot" ?

Thanks.

Last edited by FeelThePower; 08-10-2014 at 05:05 PM.
FeelThePower is offline   Reply With Quote
Old 08-11-2014, 01:47 AM   #5356
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,457
Re: StackAndTile

Quote:
Originally Posted by MalloryPoker View Post
Does this work with full flush?
what network is that?
greg nice is offline   Reply With Quote
Old 08-11-2014, 01:50 AM   #5357
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,457
Re: StackAndTile

Quote:
Originally Posted by FeelThePower View Post
On Winamax you can not use fold hotkey to fold in advance. Only when it is your turn to act.
Would prefer to have option to fold in advance also on Winamax if that is not a big problem for You to implement.
Another person recently reported this. I will look into it for the next version

Quote:
Also quick question about layout. I want to have some tables in stack and other tables tiled around stack.
http://i.gyazo.com/b411a0b53040b7ccdc423d850e2e8d93.png
These will be correct settings for that?
Looks fine. It will require you to manually put tables into the stack, either with the hotkeys you mention below, or by dragging.

Quote:
And also which hotkey i should use to take tables out from stack to tiled layout? "Keep table in grid" or "Move table to next slot" ?
Depends on what you want to do. Normally "Move table to next slot" is sufficient. "Keep table in grid" will lock the table in the grid so that any Fold clicks or "Stack" hotkeys will not move it back to the stack.

See the hotkeys help page for more information
greg nice is offline   Reply With Quote
Old 08-11-2014, 02:01 AM   #5358
MalloryPoker
journeyman
 
Join Date: Mar 2010
Location: Taylor TX
Posts: 207
Full flush is on the equity poker network
MalloryPoker is offline   Reply With Quote
Old 08-11-2014, 02:46 AM   #5359
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,457
Re: StackAndTile

Quote:
Originally Posted by MalloryPoker View Post
Full flush is on the equity poker network
You would need to choose "Other" from the Sites dropdown, and then go through the Custom Site Wizard. Instructions are on the website
greg nice is offline   Reply With Quote
Old 08-11-2014, 03:53 AM   #5360
FeelThePower
journeyman
 
FeelThePower's Avatar
 
Join Date: Oct 2011
Location: Phuket, Thailand
Posts: 391
Re: StackAndTile

Quote:
Originally Posted by greg nice View Post
Another person recently reported this. I will look into it for the next version
Thanks


Quote:
Originally Posted by greg nice View Post
Looks fine. It will require you to manually put tables into the stack, either with the hotkeys you mention below, or by dragging.
Hmmm. I were thinking if stack slot = new tables slot it will put all tables automatically in stack and i will only need to manually tile tables to which i want to focus more.


Quote:
Originally Posted by greg nice View Post
Depends on what you want to do. Normally "Move table to next slot" is sufficient. "Keep table in grid" will lock the table in the grid so that any Fold clicks or "Stack" hotkeys will not move it back to the stack.

See the hotkeys help page for more information
Ok, i think i will use "Keep table in grid" because if I tile some tables around stack I don`t want them to automatically jump back to stack after hand is finished.

Thanks again and sorry for beginner questions. Just want to be sure i set up everything correct before session as I hate to try to change settings while playing.
And so much better software than TN2 as everything is working as it is supposed to work if you set up everything correct.
FeelThePower is offline   Reply With Quote
Old 08-11-2014, 10:01 AM   #5361
FeelThePower
journeyman
 
FeelThePower's Avatar
 
Join Date: Oct 2011
Location: Phuket, Thailand
Posts: 391
Re: StackAndTile

In stack when there is all in before you table does not pop up. Which is pretty annoying as I use stack only for turbos/hyper SNGs and there are lot of times when somebody is all in before you..
FeelThePower is offline   Reply With Quote
Old 08-11-2014, 11:58 AM   #5362
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,457
Re: StackAndTile

Quote:
Originally Posted by FeelThePower View Post
Hmmm. I were thinking if stack slot = new tables slot it will put all tables automatically in stack and i will only need to manually tile tables to which i want to focus more.
Sorry my mistake, I made a typo. It will require you to manually put tables into the GRID.


Quote:
And so much better software than TN2 as everything is working as it is supposed to work if you set up everything correct.
Thanks
:thumbsup:

Quote:
Originally Posted by FeelThePower View Post
In stack when there is all in before you table does not pop up. Which is pretty annoying as I use stack only for turbos/hyper SNGs and there are lot of times when somebody is all in before you..
Possibly a bug, possibly a problem with detection of the fold button. What site/theme does this happen on? Are your gridslots abnormally small?
greg nice is offline   Reply With Quote
Old 08-11-2014, 12:16 PM   #5363
FeelThePower
journeyman
 
FeelThePower's Avatar
 
Join Date: Oct 2011
Location: Phuket, Thailand
Posts: 391
Re: StackAndTile

Quote:
Originally Posted by greg nice View Post
Possibly a bug, possibly a problem with detection of the fold button. What site/theme does this happen on? Are your gridslots abnormally small?
pokerstars, hypersimple. don`t think tables are very small, have 12 tiled tables on 2560x1440 with one slot for stack.

maybe something with my other settings in SaT?
FeelThePower is offline   Reply With Quote
Old 08-11-2014, 01:29 PM   #5364
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,457
Re: StackAndTile

Quote:
Originally Posted by FeelThePower View Post
pokerstars, hypersimple. don`t think tables are very small, have 12 tiled tables on 2560x1440 with one slot for stack.

maybe something with my other settings in SaT?
There was an update to HyperSimple in the latest release. Have you tried removing and re-including the site within SaT?

I just tested on play money, I used Move To Grid = When action required. Then I raised my fullstack-1bb and then folded so I only had a 1bb stack left. Then I put the table back in the stack so that I would face an allin the next time around, and it correctly moved to grid.

So try re-Including the site, and then try that test. Let me know how it goes.

If it still fails, I want to see if the problem is limited to only Hypersimple for you. Try changing your theme in Stars, and then remove PokerStarsHyperSimple and include the correct theme in SaT. Then do the same test.
greg nice is offline   Reply With Quote
Old 08-11-2014, 02:41 PM   #5365
FeelThePower
journeyman
 
FeelThePower's Avatar
 
Join Date: Oct 2011
Location: Phuket, Thailand
Posts: 391
Re: StackAndTile

Will try to do everything you said before tomorrows session and will report results tomorrow.

Thanks
FeelThePower is offline   Reply With Quote
Old 08-11-2014, 02:57 PM   #5366
konrad
adept
 
Join Date: Mar 2006
Location: mom's basement
Posts: 1,147
Re: StackAndTile

Hello,

Today, for the first time, I am unable to open SAT. There is an icon in the task bar, but it wont maximize, and i can see that everything is missing in the client except for the "start" box. I haven't updated anything recently and I am running SAT as administrator. I also tried to uninstall/reinstall. I don't think another program is interfering because I'm not using anything new. Thanks in advance for your help!
konrad is offline   Reply With Quote
Old 08-11-2014, 03:07 PM   #5367
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,457
Re: StackAndTile

Quote:
Originally Posted by konrad View Post
Hello,

Today, for the first time, I am unable to open SAT. There is an icon in the task bar, but it wont maximize, and i can see that everything is missing in the client except for the "start" box. I haven't updated anything recently and I am running SAT as administrator. I also tried to uninstall/reinstall. I don't think another program is interfering because I'm not using anything new. Thanks in advance for your help!
can you post a screenshot?
greg nice is offline   Reply With Quote
Old 08-11-2014, 05:35 PM   #5368
FeelThePower
journeyman
 
FeelThePower's Avatar
 
Join Date: Oct 2011
Location: Phuket, Thailand
Posts: 391
Re: StackAndTile

Just tried to remove and include hyper simple again and test it same way like you did with play money and it seemed to work. Will see tomorrow if everything works good with MTTs/SNGs.

However there is one small issue again. When somebody is allin and you have only 2 options call or fold and call is where bet/raise button should be "call" hotkey in SaT is not working. However you can call with "bet" hotkey.
Probably not so easy to fix that if possible at all?

Edit: one more thing I wanted to ask. I did not see any hotkeys to cycle through tables. Like activate previous table. And when breaks start it is not so fast to go through all tables to look if there are still some hands left to play. If I just minimize all tables from stack will SaT restore them back when there will be action needed after break?
FeelThePower is offline   Reply With Quote
Old 08-11-2014, 06:32 PM   #5369
FeelThePower
journeyman
 
FeelThePower's Avatar
 
Join Date: Oct 2011
Location: Phuket, Thailand
Posts: 391
Re: StackAndTile

Never mind . Found activate next slot hotkey heh
FeelThePower is offline   Reply With Quote
Old 08-11-2014, 09:24 PM   #5370
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,457
Re: StackAndTile

Quote:
Originally Posted by FeelThePower View Post
Just tried to remove and include hyper simple again and test it same way like you did with play money and it seemed to work. Will see tomorrow if everything works good with MTTs/SNGs.
Ok let me know. If it works with Move To Grid = When action required, then tables should also correctly pop up in the stack, if you are using a stack method of play. SaT uses the same mechanism

Quote:
However there is one small issue again. When somebody is allin and you have only 2 options call or fold and call is where bet/raise button should be "call" hotkey in SaT is not working. However you can call with "bet" hotkey.
Probably not so easy to fix that if possible at all?
Yeah, you should instead think of SaT's fold/call/bet hotkeys as simply button1/button2/button3 in left to right order as visible on the table

Quote:
Edit: one more thing I wanted to ask. I did not see any hotkeys to cycle through tables. Like activate previous table. And when breaks start it is not so fast to go through all tables to look if there are still some hands left to play. If I just minimize all tables from stack will SaT restore them back when there will be action needed after break?
There is a "Send table to bottom" hotkey, which will allow you to cycle through tables in the stack by sending the top table to the bottom. Try that. I wouldn't recommend minimizing tables, SaT _should_ still bring them up, but that hasn't really been tested.

Quote:
Originally Posted by FeelThePower View Post
Never mind . Found activate next slot hotkey heh
That does something a little different, but perhaps I'm misunderstanding what you want. "Activate next slot" hotkey will activate/focus the next slot in order 2,3,4,etc, you can verify that by turning on the active window highlighter.
greg nice is offline   Reply With Quote
Old 08-12-2014, 07:16 AM   #5371
FeelThePower
journeyman
 
FeelThePower's Avatar
 
Join Date: Oct 2011
Location: Phuket, Thailand
Posts: 391
Re: StackAndTile

Quote:
Originally Posted by greg nice View Post

There is a "Send table to bottom" hotkey, which will allow you to cycle through tables in the stack by sending the top table to the bottom. Try that. I wouldn't recommend minimizing tables, SaT _should_ still bring them up, but that hasn't really been tested.
Quote:
Originally Posted by greg nice View Post
That does something a little different, but perhaps I'm misunderstanding what you want. "Activate next slot" hotkey will activate/focus the next slot in order 2,3,4,etc, you can verify that by turning on the active window highlighter.
No i think You understand me very good. I was just using my 12 tiled layout and thought that "Activate next slot" just goes through all tables and if I had lot of tables in stack it will just go through all tables.

I think send table to bottom will do the job how I want in stack slot (if break is starting and I don`t have a hand at table just send to bottom to find if there are still some tables where i will need action)

Thanks again.

Edit: I also use small soft PsHandler for auto timebanks on stars and .fr and just saw there is hotkey in SaT "Sitout all tables". In PsHandler I can set up hotkey to quit program and if i set same hotkey on SaT for "Sitout all tables" I just need to put ~ yeah?


And You have some info how "Sitout all tables" will work together with this Winamax built in option?
Because on Winamax in general breaks are shorter than on both Stars and i would rather miss 1 or 2 hands than my timebank in my MTTs.

Last edited by FeelThePower; 08-12-2014 at 07:30 AM.
FeelThePower is offline   Reply With Quote
Old 08-12-2014, 08:21 AM   #5372
FeelThePower
journeyman
 
FeelThePower's Avatar
 
Join Date: Oct 2011
Location: Phuket, Thailand
Posts: 391
Re: StackAndTile

Quote:
Originally Posted by FeelThePower View Post
Will try to do everything you said before tomorrows session and will report results tomorrow.

Thanks
Everything is working good with hyper simple.
FeelThePower is offline   Reply With Quote
Old 08-12-2014, 08:27 AM   #5373
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,457
Re: StackAndTile

Quote:
Originally Posted by FeelThePower View Post
Edit: I also use small soft PsHandler for auto timebanks on stars and .fr and just saw there is hotkey in SaT "Sitout all tables". In PsHandler I can set up hotkey to quit program and if i set same hotkey on SaT for "Sitout all tables" I just need to put ~ yeah?
If you want to use the same hotkey in SaT and other programs, then you would prefix the key with the ~ in SaT. This tells SaT to "pass through" the keypress to other applications, instead of taking over the key completely.

Quote:
And You have some info how "Sitout all tables" will work together with this Winamax built in option? http://i.gyazo.com/f55b5116feb9b627e9d44383df012427.png
Because on Winamax in general breaks are shorter than on both Stars and i would rather miss 1 or 2 hands than my timebank in my MTTs.
I don't know exactly how it will work with that setting. But its very simple, with SaT's "Sitout all tables" hotkey, all SaT does is click the sit out checkbox on the table. Nothing more, just sends one click. So pretend you clicked the checkbox yourself with your mouse, it should behave the same way. Or just deliberately test it and see before hand, thats always the best way.

Quote:
Originally Posted by FeelThePower View Post
Everything is working good with hyper simple.
sounds good
greg nice is offline   Reply With Quote
Old 08-12-2014, 12:29 PM   #5374
Big_Mick00
Carpal \'Tunnel
 
Big_Mick00's Avatar
 
Join Date: Mar 2010
Posts: 8,568
Re: StackAndTile

I have 6 tiles with 2 slots per tile, but sometime i was 3 tables on 1 tile stack and 1 table on its own. How can i do this without it just swapping tables? I want it to just move the table to the stack and not swap it.
Big_Mick00 is offline   Reply With Quote
Old 08-12-2014, 02:40 PM   #5375
greg nice
Carpal \'Tunnel
 
greg nice's Avatar
 
Join Date: Aug 2004
Posts: 9,457
Re: StackAndTile

Quote:
Originally Posted by Big_Mick00 View Post
I have 6 tiles with 2 slots per tile,
6 slots with 2 tables per slot?

If so, I don't think you're using SaT, because SaT only allows 1 table per slot

Quote:
Originally Posted by Big_Mick00 View Post
but sometime i was 3 tables on 1 tile stack and 1 table on its own. How can i do this without it just swapping tables? I want it to just move the table to the stack and not swap it.
I don't understand. You want 3 tables in one stack?
greg nice is offline   Reply With Quote

Reply
      

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Forum Jump


All times are GMT -4. The time now is 12:15 AM.


Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2008-2017, Two Plus Two Interactive
 
 
Poker Players - Streaming Live Online