here you are:



Uploaded with ImageShack.us

entraction.ini
config.ini

Hmm actually after more testing it seems to freeze without holdem manager running too

one thing i notice, at the bottom of your entraction.ini, you have another line with [settings], that should be removed

theres another thing you can TRY, if you have autohotkey installed
you can use the Window Spy to find out if there is a control available, such as the bet box or the bet slider from your image. look at the old custom site instructions:
http://www.stackandtile.com/sat/cont...-site-tutorial

use the Window Spy and hover your mouse over the bet box or the bet slider, and see if the Window Spy shows anything Under The Mouse Cursor. if you get something, you can add a line like this to your entraction config:

but replace the control class with what the Window Spy shows. this will give you action detection as long as that control is visible (which should pretty much be all the times you can bet. maybe entraction will hide the bet box if someone shoves and you can only call, in that case you wont get action detection)

other than that, i dont know what to tell you. if everything you've told me is correct, it SHOULD work. once i finish up the sales process in the next week or two, i will move onto adding new sites. if Entraction will allow me to use play money from the USA, then i should be able to add it at that time.

can you test on another site, and see if its an OnGame problem?

nothing appear in window spy

hope you can solve this problem even if you live in USA

OK, thanks! I tried it out again and this time SaT was able to find the information and after a restart it began to stack my tables. The first time it was my turn to act SaT also tiled the tables in the 3 other slots I configured. But the tables did not go back into the stack after I folded them and after some time some of them also began to disappear/reappear and at least one table "flashed" a lot in this process.

I don't know if I misunderstood something among the config properties, here's at least my current ones:

Under Layouts: (filename: StandardRedKings.ini)

[settings]
table_width=768
table_height=402
total_slots=4
slot1x=30
slot1y=12
slot2x=828
slot2y=19
slot3x=34
slot3y=466
slot4x=833
slot4y=468
stack_slot=1
newtables_slot=1
move_on_street=vpip
oldtables_duration=0
oldtables_slot=grid
scan_mode=PW
[general]
gui_x=303
gui_y=-4
last_tab=
[sites]
number_of_sites=1
included_sites=RedKingsPoker2
RedKingsPoker2_included_executable_path=C:\Program Files\Red Kings Poker\RedKingsPoker.exe
RedKingsPoker2_included_resized_table_width=768
RedKingsPoker2_included_resized_table_height=402
RedKingsPoker2_included_action_color=0x131313
RedKingsPoker2_included_action_x_scaled=149
RedKingsPoker2_included_action_y_scaled=320
[hotkeys]
number_of_hotkeys=0
send_table_under_mouse=1

Under Sites: (filename RedKingsPoker2)

[settings]

standard_table_width=768
standard_table_height=402

buttons=fold,call,bet

action_button=fold

fold_button_x_coord=149
fold_button_y_coord=320
fold_button_region_topleft_x_coord=90
fold_button_region_topleft_y_coord=324
fold_button_region_bottomright_x_coord=190
fold_button_region_bottomright_y_coord=349

call_button_x_coord=241
call_button_y_coord=317
call_button_region_topleft_x_coord=216
call_button_region_topleft_y_coord=322
call_button_region_bottomright_x_coord=313
call_button_region_bottomright_y_coord=351

bet_button_x_coord=371
bet_button_y_coord=331
bet_button_region_topleft_x_coord=341
bet_button_region_topleft_y_coord=311
bet_button_region_bottomright_x_coord=437
bet_button_region_bottomright_y_coord=337

use_basic_click=0

table_class=FlashHostClass

table_include_title_text=
table_exclude_title_text=RedKings

ok. i promise i will try to add entraction, if they allow USA players for play money. my todo list: first to accept the payment stuff. second is to add new sites. can't say how soon though. i'm really surprised that this isnt working for you though

does anyone else use SaT with Entraction network?


ok, you have Old Tables Slot = grid, and Old Tables Duration = 0. this means that every 0 minutes, move the Old Tables to grid. this could be the cause of your problems. if you are looking to disable Old Tables detection, set Old Tables Slot = 0.

see if that does it.

Ill give this a try but this option might be good only for cash games.
But 5 min sitting out for SNGs especially turbos would kill the player if they dont notice it.

Ill experiment with a small time setting.

Anyone else experience this bug?

I have several tables up and tiled. Then I hit start in SAT and it moves the tables to the designated slot however it must be also trying to quit me from the tables because I get Stars popup "Are you sure you want to leave?"

yes this is the Old Tables feature. what are your settings for it?

I'm at work so I'll paste config when I get home.

FWIW, I upgraded to new version (Start page looks nice btw, I like the added info) and simply moved my .ini from old computer over. Usually when I do this, all I need to do is remove site and re-add it and everything works fine.

the new feature for 'Old Tables' will handle tables that have not required action in X minutes (sitting out tables, tables that have closed, etc)

the default settings are to move Old Tables to grid after 5 minutes. if you have changed this to 'close' instead of 'grid', then SaT will first move the tables to grid, and then try to close them. its up to you to dismiss the popup

Hi,
looks great but i dont know if and how i can build a layout that works the following:

3 stacks besides each other like:

[1] [2] [3] that i could manage to do.

when tables requires action it moves from stack under the stack into grid like this:

[1] [2] [3] <- stacks
[-] [-] [-] <- grid

and when done back to the stack it came from.. possible?

hrmm, i doubt this is gonna be possible. by default SaT uses one stack and then all the rest of the slots are gridslots holding one table.

what you could try is to run three instances of SaT, each having a different stack and gridslot. for example for your 3x2 layout above, you could use each column as a new SaT instance. the problem is that you would need to use different sites for each SaT instance, so this would only be plausible for 3+ sites. its probably more work than what its worth, but you could try it

so for the first run of SaT, create a config with two slots like so:

1
-
2

then copy the SaT directory and run a whole separate instance and create a grid like so:

. | 1
-----
. | 2

then for the third:

. | . | 1
----------
. | . | 2

Hi, just tried S&T on my ongameskin. Seems to work on it's own, but with HM/hud it freezes almost right away. Is there a simple solution?

/S

This is working nicely on Ipoker, Paddy Power. WP sir. Great software.

another user reported this same thing. i'm in the USA so i cannot test on onGame. can you ask the HEM people if they do anything special with their HUD for onGame? maybe i can change something if i know what they are doing different.


glad you like it. spread the word!

please change/add:

Manually move to grid (or something like that, dont have it installed here..)

to

Manually move next grid
and
Manually move previous grid

At the moment you cannot move the table once its in the last grid. You have to put it back int he stack and then start moving again.

hrmmm. i dont know if ill have two hotkeys to move back and forward. its implemented the current way, to allow you to keep moving it through the grid. that is, if you use the hotkey on a table ALREADY in grid, it will move it to the next grid slot.

but i will make it so that if it is in the last gridslot, and you use the hotkey on it, it will try again from the first gridslot. so for example

1|2
----
3|4

if slot1 is the stack, and the table is in slot4, and you use "manually move to grid" on the table in slot4, i will change it to start checking at slot2 again. are you saying it doesn't do this currently?

With me, manually move table only moves the table until the end of the grid. Then its stuck.

ok, ill add it to the to-do list for next version. thanks for the suggestion

I have downloaded the latest version from website but when I try to run it it says

New version 1.99.21 available. Go to the website to update.

what version does it say on the about tab? it is likely that you need to clear the cache in your browser.
http://en.wikipedia.org/wiki/Wikiped...ass_your_cache

ill see if i can disable caching somehow in the future so browsers will always re-grab the file

hi thanks for this, just a quick question i'm playing on ipoker i just want to use it to let me have a hotkey to fold, set it up and it works fine but i don't want it interferring with table layouts, i like ipoker default layout...

I tried setting grid to zero but that says layout has error, how do i just use hotkey functionality? tyvm

just use:

tile setting = never
new tables slot = 0
old tables slot = 0

that should do it. let me know