whew. sounds good. saves a lot of time of debugging

have not seen it, but have not done much testing on fulltilt. one thing to note, when using "flop" setting, it needs to scan whether or not there are flop cards, which causes some delay and potential lag. i'm not sure how fast it would be on 24 tables, or if it would slow down a lot

are you folding with "fold and restack" when you are powering through? that might cause it. theres no need to use the built in hotkey for "fold and restack", you could just use a normal betpot or tableninja fold hotkey for that. the only real time to use the "fold and restack" hotkey is on tables that are in the grid slots

Ok, cool, good to know. I'll mess around with it some more. Just trying to get this set up great for the new year

And that makes sense as for the flicker/lag issue (which is what I think it is). Like I said, I'll play around with it and see what I can figure out. Thanks again!

for some reason, v1.15 is missing alot of flop detections, and dosent cycle through the tables to bring up the ones that require action anymore. Is it possible that you could repost 1.12 please? thanks

click 'Attachments' at the top of the stackAndTile page to download oldder versions. i dont know why 1.15 would be worse

pokor playar, have you tested this multiple times with 1.15 and it continues to not detect flops and not popup tables in stack? can you provide any more info that might help

yes, I thought it might be because I added some other scripts to use but I made sure to turn them all off to see if they were the problem. Unfortunatly It is still missing flops and not cycling. I am about to test 1.12 because I knew that version worked great. It I still have problems then I know then something must have changed on my computer.

what site are you playing on that it misses flops and what do you mean "not cycling"?

and plz report if 1.12 works better. thanks for your help

Ok, here are my observations so far...

1.12 and 1.15 both have a very hard time detecting the flop when I am the BB and check my option. It seems they miss this 90% of the time. Other than that I didnt see any problems detecting the flop.

Now about the cycling thing. What I mean by this is... When I have an active table on the grid and an active table in the stack at the same time, if I act on the table in the grid first it will move back into the stack in front of the table needing action that is already in the stack. Now with v1.12 it will automatically cycle the table that still needs action to the top so I can see and act on it, although with v1.15, it will just leave the completed table on top and leave the table needing action covered up until it gets to the point where it is about to timeout, which then stars will beep it and move it to the front.

I hope this makes sense.

thanks. its good to know that the flop detection is the same with both versions. i will look into the issue of bb checking.

i did change the cycling code a little to try to make it more efficient (i tried to make it cycle less, to fix this problem http://forumserver.twoplustwo.com/sh...&postcount=158)

but i see where i broke it now, thanks again

but without HEM, it works correctly?

v 1.16

- fixed cycling urgents to top of stack
- added grid config for visualization and drag and drop re-arranging
- added multimonitor support
- main window is a normal, hitting X closes it instead of minimize to tray
- executable version available

http://www.overcards.com/wiki/moin.cgi/StackAndTile

how can i use multimonitoring? dont working for me

is this program not working with fulltilt?

The new version is pretty much perfect imo. I love love love the visual configuration. Yes it still misses a flop every now and then, but it is easy enough to use the manual move button, or just drag it to the side if you want. Greg, you are the bestest.

Yep, multimonitoring capability isn't working for me either.

hrm, what about it isnt working? the multimonitor change was for the Setup Grid, so if you haven't done so, you'll need to re-run setup. if you have done so, can you give me some more details of whats not working? when you "configure grid", are all slots on the one monitor?

cheers man, thanks. i can't take credit for the visual config, give those props to _dave_ from StarsPlanner.

i haven't looked into the flop miss yet, but it could be due to a weird table size or something. i'm planning a fairly significant update that may take a while to work out. who knows it might get fixed by accident

it should be. are you following the instructions during Setup? one in particular, you must ensure that the table size you use during Setup is the exact same that you will use during play.

i have it, thanks

but have another problem its tiling but im not in a hand

using win7

are you re-sizing the table at any point? you must use the exact same table size that you used in setup. (until i fix this in next version)

for now, heres what you can do:

turn off "pokerstars detect all-in" setting, and try to play. tell me if it still tiles when you are not in a hand.

Yup, all tiles are on one monitor only, the one where I have my windows icons (Win 7). When I dragged the sat to my other monitor and pressed the configure grid setup, it still went back to the 1st monitor.

no, not the "configure grid" button, but rather, the actual "Setup Grid" button on the Control tab. please try running that first

can you tell me what exactly is not working? then maybe i can fix it.

are the tables not moving into the grid slots?

Okay, so I ran that first. I made number 1 as my stack...then put in my fold and stack hotkey... What else do I need to do? When I went to configure the grid, it still only went to my first monitor.

Just download 1.16 ahk and got this error when i try to run it:
Error at line641.
Line Text: {
Error: The left most character above is illegal in an expression.

Didn't try the exe