Yes I would imagine everyone would have the same problem with the Party replayer. I test on play money and I don't see that replayer button. I think in the past, Party put the text "Replayer" in the titlebar, because I have that excluded in SaT. But your diagnostic isn't showing that. I don't have any solution right now off the top of my head..

ye dont think theres the replayer on playmoney.

alright.. guess i have no replayer then. ill deal with it
thanks anyway

I'm having issues with the new WPN update as well on SaT version 2.98.07; SaT doesn't recognize new tables at all. Setup seems to be working fine though. Not sure if it makes a difference but I've been running the setup with cash tables and actually using the program on MTT tables.

Sorry never mind, I just restarted again and it seems to be working normally now. Thank you again for all the super quick updates.

does your software supports ggnetwork? is there an option to convert stacks to bb? thank you

Yes GGNetwork is supported, but there is no stacks to BB option

Hi

I was messing around with the trial version of this to try before buy. The software is nice overall and seems to work fairly smoothly.

I was using it just to tile, 8 slots overall. When I lost a table I was trying to move that table into a different slot. However, the table kept popping back into the original slot. Essentially what I am asking is it possible to move tables around the pre-defined slot when using tile only mode?

I also experimented with stacking and tile, but for some reason I could not get it to work and tables stayed tiled.

thanks in advance

By default, you should be able to drag the tables around in different slots. I made a mistake and introduced a bug in the latest version. Please download this development version, then go into SaT's Advanced Options, and make sure the Drag Drop option is turned on, and click Save:

http://www.stackandtile.com/sat/tmp/...tup-29807h.exe

Let me know if that fixes it.

Likely what's happening is that SaT is always thinking that your tables require action. You can confirm with the Test on this page, and there are some possible solutions to try first. Let me know if any of them work:

https://www.stackandtile.com/sat/hel...op-incorrectly

thanks this fixed it.

i was also trying to set up a custom site.I got the the table and everything set up perfectly. However i did something wrong as it detects the lobby as a table, iys not a massive issues as after a while it realizes and then i can just move lobby.

Any ideas what i did wrong?

thanks again in advance

Yeah that excluding the lobby should be an easy fix. You can find your custom site file in this folder:

C:\Program Files (x86)\StackAndTile\Sites\

open up the file, and find the line below and add the "/" character on the right side of the = sign, like this

this will force SaT to only include windows where it finds the "/" which all tables should have, for the blinds separator, but the lobby likely doesn't have that

save the file, and then close out SaT and reopen it altogether. Let me know if that works

Thank you this worked.

can you add updated ggpoker please? i used to play on PokerOK but they switched to GGpoker and when i try to add site it doesnt work, i think they made some big update

Are you using the latest version of SaT?

i didnt, so i updated to latest version and tried again and same problem, here is message iam getting
https://gyazo.com/225afd4843f6245975b48840b54c8bfe

also can you add run it once to supported sites? would be helpful if i get hotkeys working for betslider

can you use SaT's menu item for Help->Diagnostic->Get Window Title, and paste me the results for both the main lobby, and a failing table?

i will look into it when i get a chance. what specific hotkeys are you looking for?

Hello,
I was using trial version for two weeks and today i bought the low stakes version of SnT. For some reason partypoker tables are no longer working correctly despite the fact that I restarted both apps+ set up partypoker once more in sites. Please help

Specifically what isn't working correctly? Are tables not being detected?

If so, and if everything worked fine during trial, my guess is that SaT isn't detecting the stakes correctly and therefore blocking tables. See this page:

https://www.stackandtile.com/sat/help/currency-format

Typically for Party this is solved by uninstalling PartyPoker from your machine, and re-installing it, and choosing English language during the setup

v2.98.08

https://www.stackandtile.com/forum/s...10337#pid10337

https://www.stackandtile.com/sat/download

Thank you for your response, after following the steps from the link tables from PP are now being detected. However another issue emerged now - for some reason whenever I use stack and tile layout and press my hotkey for fold+stack the table moves to the stacked slot and instantly moves back to the grid. Do u have any idea why is that happening?

It could be because you needed to open the Party lobby BEFORE pressing Start on SaT

I have lots of ideas why that is happening Its probably the most common problem people have.

If you are only seeing this problem for Party, then one quick thing you can try is to make sure you've enabled the "3 color action buttons" option within the Party client. And then Remove and re-Include the site into SaT

If that doesn't fix it, here is the help page with lots of solutions to try:

https://www.stackandtile.com/sat/hel...op-incorrectly

Let me know what you try and what works or not

This worked, thanks again, great support!

I use tableoptimizer for stars and it is best software i used for it. But they no longer are going to work after a future stars update.


For me, i need software that



1. Table tiling management. I use 2 monitors that are 1920x1200. I have 4 tables on each screen without overlap. So if i have 8 tables, i can have 4 on each screen. But if i have more tables like say 16 for example, usually its like 2 tables on each quadrant so its like one behind the other.


But i play on stars and 888 and sometimes party.


So many times some quadrants are for 888 only and some are party only. Thus i don't have stars table over an 888 table and vice versa since different software like tableoptimizer and 888caption can conflict one another.


I use 888caption and partycaption for 888/party.


Also i need to move a table to a quadrant where it automatically goes to that spot without me manually moving it to the spot.



I assume stackandtile does what i want to do here? The thing is tableoptimizer works great for this. 888caption works as well when moving tables. But with partypoker... i use partycaption and there is this one annoying issue. Example say you get 8 tables of party. Say you could have them on each quadrant of each monitor so no overlap. But if you bring a party table over another party table, instead of it going over it... it would switch table spots. Apparently partycaption doesn't allow me to tile it the way i want. Does stackandtile work for what i want?



2. Preflop/postflop bet sizing. I would use keys like a for bet x percentage of pot... letter T for 2.5x preflop etc. But lot of these hotkeys are in the stars preset hotkeys. But for postflop betting, i want more than just the few options on stars so i have lot of hotkeys for different bet size percentage. Does stackandtile have this option or its mainly a tileing program and nothing more?

You want it so that each quadrant/slot acts as a "stack", meaning that it can hold more than one table. SaT doesn't currently support this, but it probably will in the future. I can't give a timeframe because I'm working on some other issues currently. Right now, SaT only allows one slot to act as a stack, and all other slots can only hold one table each.


What is the criteria for when a table should be automatically moved to a slot? Based on what site the table is?


Sounds like partycaption is doing what SaT would do, as described in my first paragraph. Its not allowing you to stack multiple tables in a single slot location.


Right now SaT just has hotkeys to click the preset BetSize buttons on the table, and also a hotkey to "Bet x BBs".

I'm currently testing out a "Bet % Pot" hotkey and its working well for Stars and Party. I haven't tested it on 888 yet. It will be ready soon

Hi there. Well i want my tables to look like this.



Now imagine 2 monitors with 1920x1200 resolution right next to each other and of course my laptop on the left of these monitors... but i dont put any tables on my monitor.


I post it like this because when i post monitor 2 to the right of it, the posting on the forum makes it look not correct. So imagine monitor 2 is to the right of monitor 1.



Monitor 1

X X
X X


Monitor 2

X X
X X



Thus imagine every X is a table whether its stars/888/party. Let say when i open the 9th table, it shows on on one of those X's. Let say 2nd monitor and 1st quadrant or top left. I want to move this table to the 1st monitor quadrant 1. I would just move that table and just drag it to that quadrant and it would automatically stick to that spot so to speak... so i don't have to manually move it and place it exactly where i want it to be so there would no overlap. Does that make sense?



So in my example, let say i have 16 tables. Let say i have 10 stars, 3 tables of 888 and 3 tables of party. With my 8 quadrants, let say i want 5 of those quadrants to be stars table, 1 would be 888 and 2 would be party. Something like this


Monitor 1 Monitor 2


Party Party 888 Stars
Stars Stars Stars Stars



But is this possible since 3 party tables would occupy 2 quadrants on party? When you see one quadrant of 888 and 3 tables, you obviously know that i mean behind that one 888 table, there is like 2 behind it.



Of course i might want some party table on a different quadrant or say i want like 5 quadrants to be party instead if im playing on party mostly. So i cannot do this what i described? So what about moving a table from one quadrant and moving it to another spot... if i do this, does it automatically like stick immediately to that quadrant i want it to be? I find this very useful as it would just stick to that spot.

Well I would never want an 888 table over a stars table or party table over stars table. I never do this because the software that i use now... it would like conflict with each other. So example if i have stars table over 888 table, im not sure if the 888table pops up when action is on it because a stars table using different software is over it.



Well i want to have the option to move one table from quadrant 2 in monitor 2 to quadrant 3 in monitor 1 anytime i want and vice versa. And each time i do that, it would just immediate stick to that exact quadrant i want. I dont want the program to automatically move a table to a specific quadrant because... well now the blinds are the highest or say i have a short stack in this tournament. Does that make sense? Basically i want to move tables to any quadrant manually based on what i see. Example if i have a table where its down to less players, sometimes i want only that specific quadrant to have only that 1 table... while other quadrants might have even 5 tables on that quadrant if say i have 2 tables at the moment i want to see all the action on.


Okay so basically I can't do postflop bet sizing then on 888? The thing is preflop bet sizing is not that important because the software for each site gives you a few options so you could have min raise, 2.25x, 2.5x, 3. So that is already fine. But for postflop, sometimes you want more bet sizing amounts like say 60% pot, 80% pot etc.


So as of now, Stackandtile doesn't offer what i want to do based on all my criteria?


Also Stackandtile doesn't show pot odds on the table? Example with other programs, you can show pot odds and terms of fraction or percentage. Example pot is 1000 chips, someone bets 500 chips, it would show 3:1 odds or 25% equity etc. So this program does not do that? What about showing everyones BB stack in big bold number? I know there is option to do this on stars and party but when you do this, you cant see how much chips someone has unless you change it back and forth. The other programs you can just have someones BB stack on each player so you dont even need to change the stack to bb each time if you want to look at it that way.