its not too hard, although i haven't really tested it thoroughly

download this version v2.98.02b

http://www.stackandtile.com/sat/tmp/...tup-29802a.exe

click on File->Current Layout, and add this line:

save the file, and close and reopen SaT.

then Remove and re-Include the "Microgaming" site. this new setting will only take effect during the Include Site setup during the F9 step. after that, SaT should save this size going forward in the "included_resized_table_width/height" settings. you'll want to remove that new resize_override line immediately after including Microgaming

let me know if that does what you want. of course, you may have to live with some overlap now

this is bad news, because their new client isn't very good from my early tests

yes would be a good idea to try also

Downloaded v2.98.02b, removed microgaming, changed layout.ini file, saved, restarted sat, tried to add microgaming but it still resized to "smaller" size with correct height.

Just wanted to report it did not help me, or maybe I just did something wrong.

However I made new layout with bigger microgaming size and added all other sites and it worked. Not sure why I didn't think of this before.

Thanks for fast help as always.

hrmmmm well glad the other method worked. are you sure you completely closed out SaT and reopened it after adding that line to your current layout .ini file?

i'm 90% sure I did follow all steps, but I will test it bit later again to be sure and will report back.

Hey, looking to use stackandtile to cascade/stack all my tbls I open site on 2nd monitor and when I get action tile it on main monitor, is this possible if so how?

dude i'm an idiot, i pasted you the link for 2.98.02a not 2.98.02b

try this:
http://www.stackandtile.com/sat/tmp/...tup-29802b.exe



Yeah, this should be a normal setup

Play Mode = Stack And Tile
Move to Grid = When action required

then use the Visualize Grid button to put the slot#1 on your 2nd monitor, and put all of the other slots o your main monitor

My stars.es tables are not popping up when stacking, All my other sites work just fine and made sure all the stars.es settings are the same as stars.com but still won't work, Stars.com works just fine as well.

either of two things are happening:

1. SaT is not detecting when Stars.ES requires action and always thinking it never requires action

2. SaT is thinking other tables from others sites are requiring action when in reality they do not, and so those tables are staying on top

i'd go through this Test and the solutions starting with Stars.ES first:

http://www.stackandtile.com/sat/help...op-incorrectly

let me know what you find

Seems to be working now, No clue why but thanks for the help anyways. Will post again if it stops working.

kk no problem, sometimes computers are weird

hi, i used this program for years (until like 2-3 years ago), and am thinking about getting it again, is it possible to get (another?) trial?

Yeah of course. Is it locking you out? If so, just click on the Register button and paste me your Machine ID

tried it, trial works, thanks!

i tried to make a layout where tables are 1280x720, however stars doesn't seem to allow that? (always wants to make them square?)

is there any way around that?

Stars tables aren't usually square... Does Stars allow you to resize tables that size with your mouse?

they do, but if i resize x, it auto resizes y

/€, sorry so, no

Right, but what are x and y?

If I remember correctly, Stars has always used proportions of approx 800x600 by default for their tables, which is 4:3 ratio. 1280x720 is a standard 16:9 proportion typically used in widescreen HD type apps. Stars wouldn't allow you to resize a table to that proportion with your mouse. And even if SaT could force that size on the table, the scaling would likely be off for some of the button locations.

That's why usually its best when creating a File->New Layout, to actually physically resize the table with your mouse first, and then press F7 to grab the dimensions. If you try to type in your own custom dimensions, the poker sites might not allow it

damnit, thought so, well gonna do that instead then!

thanks for the help!

I want to add power up tables to my stack and tile selection but first had to create a custom profile. No problem. However I cannot use it in-conjunction with the normal mercury layout.

I get the following error when trying to have both at the same time.

ERROR. you are trying to include two of the same sites into SaT. if you want to include "powerup", then first cancel this and remove "PokerstarsMercury" from within SaT's Included Sites list.

Ideally i'd like to play both power up and some cashgames on pokerstars at the same time.

*another issue when playing Spin & Go Max's is that i'd like to have the all-in and pick the prize phase returned to the grid. This is because i'd like to show this section when streaming on twitch, without it being lost in the stack.

What are powerup tables? I haven't heard of them. Are the graphics somehow different than normal tables? Can you post a screenshot?



SaT only moves tables to grid based on the "Move to Grid" setting in the software. I'm guessing this happens at the end of the SNG? I'm not sure how we could accomplish this...

hey thx for the quick response.

https://media.discordapp.net/attachm...833&height=601

This is a picture of the table. its very different and allows fullscreen mode.

*shame about the Spin and go Max tables

Yes that's very different. I was hoping to see the fold/call/bet buttons too, to see how they compare. The problem is, SaT would need a way to detect these tables that distinguish them differently from normal Stars tables. Usually this would be something like the text "Powerup" in the titlebar of the table. But I don't see that there. It just looks like a normal tournament titlebar text.

The SaT ERROR you were getting was because both of your PokerStarsMercury as well as your 'powerup' custom site, would match all of these tables. Probably PokerStarsMercury was already detecting the powerup tables and putting them in the grid, even without your custom site. But if the buttons are sized and placed differently, then hotkeys and actionrequired detection would fail

Well this would be the case for tables of any site. SaT moves tables based on certain criteria. Are you looking to see the showdown? The allin card reveal? Or just some prize screen after the tournament is finished?

https://cdn.discordapp.com/attachmen...32/unknown.png

here you can see the bet boxes.

*spin and go max is a vairant where after 20 hands every player is forced allin until there is one winner, the winner then has to choose a prize from 3 options. People love to watch this part.

thanks a lot. i just got the pokerstars update myself. i see they do have play money games for this as well.

Can you paste me your custom site file for the powerup tables? it will be located in this folder:

C;\Program Files (x86)\StackAndTile\Sites\

and i will try to add support for it

just played a play money game for this too. not sure if this will be possible currently. you would need to instead use a "Keep table in Grid" hotkey when you see that the table is getting close to the allin period

[settings]

standard_table_width=1207
standard_table_height=867

buttons=fold,call,bet

action_button=bet

fold_button_x_coord=849
fold_button_y_coord=808
fold_button_region_topleft_x_coord=810
fold_button_region_topleft_y_coord=771
fold_button_region_bottomright_x_coord=928
fold_button_region_bottomright_y_coord=849

call_button_x_coord=1000
call_button_y_coord=814
call_button_region_topleft_x_coord=938
call_button_region_topleft_y_coord=774
call_button_region_bottomright_x_coord=1056
call_button_region_bottomright_y_coord=847

bet_button_x_coord=1125
bet_button_y_coord=815
bet_button_region_topleft_x_coord=1069
bet_button_region_topleft_y_coord=774
bet_button_region_bottomright_x_coord=1184
bet_button_region_bottomright_y_coord=848

use_basic_click=1

table_class=GLFW30

table_include_title_text=
table_exclude_title_text=

Awesome thx very much.

*ok ill give it a go at some point it does help that it has a tracker showing number of hands left

ok sir, please try this version v2.98.02d

http://www.stackandtile.com/sat/tmp/...tup-29802d.exe

find the new site "PokerStarsPowerup" and Include it and see if it works. let me know