Hmmm. Can you please try this version v2.97s4 and also Remove iPokerNew and then re-Include it into SaT?

http://www.stackandtile.com/sat/tmp/...etup-297s4.exe

As for the hotkeys, which hotkeys specifically don't work? All hotkeys or just some hotkeys? And is there anything special about the tables that the hotkeys fail on? Are they only cash games? Only tournaments? Etc

The update doesn't seem to have fixed the problem. I've tried setting up a whole new grid and re adding iPokerNew and still the same issues. Can't seem to pinpoint the reason why the hotkeys aren't working. But it is all hotkeys for that table. Maybe something to do with the tables being overlapping on the grid?? I have only been playing Twisters, so not sure if its down to the format type as haven't played any others.

Edit: Have just tested a new grid with different table sizes, and the hotkeys don't work at all on that. The tables are slightly different size to what they should be, so im guessing this is probably causing the issue with the hotkeys as the table isn't the size that snt thinks it is

Hrmmmm, no hotkeys at all? Which hotkeys are you trying? What about table movement hotkeys such as "stack table" or "move table to next slot"?

Can you verify that the tables are passing the action required test below:

http://www.stackandtile.com/sat/help...op-incorrectly

..also, one user said that Coral is now showing some casino games in a separate window. Can you make sure you have those turned off within the iPoker client:

http://www.stackandtile.com/sat/help/ipokernew

We def can't have any weird windows popping up which would confuse SaT as to the table size.

Then Remove and re-Include the site. Make sure the tables are passing the Test in the previous post. Let me know

I'm only using afew hotkeys. R for raise on the keyboard, and the Xbutton 1 and 2 for fold and bet 'x' bb/ Oh and Tab for ignore table from the grid.

I have run the test and it seems like the games where hotkeys aren't working, it will constantly be action required 'NO' and then on the games where hotkeys work, it was constantly be on 'YES'. One thing to note, the tables where hotkeys dont work, the raise button on the keyboard does work, but the other 2 mouse hotkeys don't.

I've made sure all my ipoker settings are correct and removed and readded 'iPokernew' and also tried a new grid but still having problems. Doesnt seem to be any logic to what tables the hotkeys aren't working on. All my games are twisters so it cant be down to the format

Ok well we need to fix this first. The Test should change with the status of the table. When its your turn to act, it should say ACTION REQUIRED: YES, and after you make your action, that should change to NO.

If that's not happening, that will cause many different problems, including hotkeys not working sometimes (since SaT will be clicking different coordinates on the table depending on whether or not its your turn). So we need to fix this first.

You say all the games are twisters? Can you check to see if there is anything consistent about the tables where it always says YES or NO, instead of where it changes appropriately?

Ok i understand.

All the games are twisters yes. There doesn't seem to be anything consistent about the tables that always show YES on the test, compared to the ones that always say NO. I cant even tell any difference between the YES and NO ones either. So i've got no idea.

Have you tried the different solutions on that Test page?

http://www.stackandtile.com/sat/help...op-incorrectly

Also, one user had to make sure that the casino mini games was turned off within the iPoker client. Please make sure you have the client set up properly and then Remove and re-Include the site:

http://www.stackandtile.com/sat/help/ipokernew

Let me know what you find

Yeah i have been through all of the solutions and also made sure all my ipoker settings are correct. Mini games are turned off aswell.

I have just completely uninstalled and deleted the SnT config file and made a new layout and added ipokernew and still the same problem where the test will always show action required as YES all the time, or NO all the time. I've even tried a bigger size table on incase SnT wasn't detecting something on small tables (i have my tables very close to be as small as they can be), but its the exact same problem on a large table.

Not sure what else i can check/do. Any suggestions.

Thank you for your quick responses

This is how SnT is resizing the tables, as you can see its slightly different to what has been set on the grid. Not sure if this is what's causing the issues?

That different table size compared to the grid shouldn't matter.

Can you try a normal cash game table and let me know if it also stays at always YES or always NO? Or if it correctly changes as its supposed to?

Can you also click File->Current Layout, and paste me everything?

Can you also PM me your skype name?

Having problems adding ipoker, Keep getting this message when trying to add the site after pressing F9. Have tried it on sng tables as well not just speed and get the same message. This is on Everest poker btw.

Have also made sure all the settings match from here - http://www.stackandtile.com/sat/help/ipokernew

Thanks

Can you use this version v2.97s4

http://www.stackandtile.com/sat/tmp/...etup-297s4.exe

Then try to Include iPokerNew and let me know how it goes?

Thank you it worked.

ok cool

Does this work on ignition?

Does this work on BOL?

Can I get it to work on both together?

The entire point of this software is that it will work on multiple sites. It just depends on what sites. Ignition is one of the supported sites, so yes it should work there fine. What is BOL? BetOnline? That is part of the Chico network, so you would Include the "Chico" site.

Please download this latest development version v2.97s4

http://www.stackandtile.com/sat/tmp/...etup-297s4.exe

Try it and let me know where you are having troubles

I open stack and tile with betonline.

when I open two tables to test and stack them it reads both the tables puts them in one stack but it doesnt flip the action to the other table when required.

I tried to close the auto activate table option in BOL as well. And since they are stacked I cant even switch because it keeps showing me another table where there is no action going on.

Sounds like SaT thinks that the BOL tables always require action, and that's why it keeps them on top. You can Test if that is the problem by following this procedure:

http://www.stackandtile.com/sat/help...op-incorrectly

Are you sure you set up BOL correctly? Specifically you need to make sure to use D3D8 video settings within the BOL client:

http://www.stackandtile.com/sat/help/chico

If you have something different, please change it, and then Remove and re-Include the "Chico" site within SaT

Hi there. I posted this on the tableoptimizer thread for stars and posted it on 888caption/partycaption thread and posting here it as well as i want to know would stackandtile do what i want with the table layout.


This is how i set up to with stars. I also set up it the same with 888caption. Thus any table from 888 that opens up, its at one of the quadrants and i just drag it to which ever one i want. I mentioned to you that partypoker, i could not do this though. Basically i have to manually move the partypoker tables. That isn't that big of a deal though because i don't have more than say 6 table max at once with partypoker. Its more like 3 table of partypoker max.



So i have set up the layouts exactly the way i want it a while back. I have 24' monitor with 1920x1200 resolution where you get 4 tables right in the middle with no overlap. Thus imagine i have 12 tables. There would be 3 tables on each quadrant. If i want to move it to another quadrant, i just drag it a bit and it goes to the right one. Thus if i have 20 tables, it would be like a few behind each table etc.


Now i want to know this. If i wanted to have 6 tables showing on my screen... the reason being that way i could view more tables at once... and also because i want to have partypoker and 888 tables... thus imagine i have 6 quadrants. I would use the original ones with stars. But with 2 quadrants, one would be specifically partypoker and the other 888. The reason is because when i use to with stars, i use partycaption and 888caption with the other sites. And thus imagine i have 5 tables on one quadrant and say its 3 tables of partypoker and 2 tables of 888. Or something like 2 tables of stars, 2 of partypoker and 1 of 888, there is going to be not only lot of misclicking, but some tables don't pop up correctly. Does that make sense?


Thus i want one quadrant specifically for partypoker, one quadrant for 888. The other ones for stars. So how would i do this with TO? Do i set up slots again and click on autoslots and then what i click on afterwards? The thing is i want to make sure i do not have my old slot setup deleted as i used it for a while. But now i would like to maybe have 6 tables showing. The issue with this though is the tables would be a lot smaller.
But how do i do this? And is there a way where say i set up slots where its like 6 tables showing. 3 on the top and 3 right under it. Then when stars table open, it goes to say the stars quadrant only?


Thus imagine this


Stars Stars Partypoker


Stars Stars 888



I currently have it like this



Stars Stars


Stars Stars




But lately i tried playing on partypoker and 888. But my issue is i put all the partypoker tables on one quadrant. But there is usually 3 tables max only. And with 888 poker, max 2 tables. Thus i dont want to have like 5 tables using 2 quadrants. And say 15 tables between 2 quadrants.


Can you tell me how i can do this? The other thing is this. Let say i have 10 tables of stars and say 3 tables of 888 and 3 tables of partypoker. Thus it would look like this


Stars Stars Partypoker


Stars Stars 888



Now let say i bust out a lot of tables and only have a few tables only. Thus imagine i only have 3 tables of stars left and 1 table of party and 1 table of 888. Now would it be possible for the 6 table layout to go to the 4 table layout? Thus i would then have it like this


Stars Party


Stars 888



But how do i make sure i create a new 6 table layout now where i make sure my original layout with TO is not deleted? And the other thing is i would have to do this with 888caption and partycaption right? So how would this work since im mixing it up?



Thanks.

Also on a related question. My monitor is 24' and 1920 x 1200 resolution. If i were to have a 27' or 30' monitor, would it be possible to have 6 tables shown on my monitor where the tables are default size? I always liked the stars tables default size as its big. I seen ppl do like 9 table tile or 12 table tile or even more. I dont know how in the world ppl can play like that because not only are the cards too small, the betting is way too hard etc. Thus the most tables i would want shown on the screen is 6 max. Reason being to add partypoker and 888.


Now what if i get a 2nd monitor? Then i would be able to do it like the way now with Stars tables and then with partypoker and 888? Which would be better? Getting a 2nd monitor like this? Or a bigger monitor than the one i have to have 6 table showing? But could you have 6 tables at default size on one monitor where its 3 on the top and 3 right below it?


I will most likely not be able to get a bigger monitor like this. But what about 6 tables on my current monitor tiled? The tables are a bit smaller i noticed when i tried this without having to on and neither partycaption nor 888caption.



So would stackandtile do all this the way i described? The thing though is i use tableoptimizer for stars and thus everything works fine with hotkeys, auto reg sng etc. With partycaption and 888caption, hotkey seem to work fine but the one issue is the table layout doesn't seem to work right on partycaption though so i manually move partypoker table to the same quadrant.


Because stackandtile is only for moving tables and not for hotkeys right? Because i want to use tableoptimizer for hotkeys and partycaption and 888caption with its own hotkeys.

The size of the monitor is irrelevant. What matters is the resolution. Default table sizes are usually around 800x600 pixels. Some sites are larger, some smaller. Stars is around that size if I remember correctly. So a 1920x1200 monitor would fit 4 tables at default size, which would occupy 1600x1200. There would be some spare horizontal space. The vertical space would be a near perfect fit.

For 6 tables, it would depend how your grid layout is. If its 3 columns by 2 rows, then you'd need at least 2400x1200 resolution.

Keep in mind, these resolutions don't take into account DPI scaling. For example, people who buy 4k monitors (3840 x 2160) usually scale everything larger because then all of Windows, icons, text, is just too small to read. So you end up with less than the advertised resolution.


Not by default. SaT only has one stack slot. The other slots are individual grid slots.

You might be able to accomplish this by running multiple instances of SaT. But I've never tried it. I'm also not sure if I fully understand your requirements


SaT definitely is used for hotkeys. Its meant to be one program covering all sites. So you would avoid all that nonsense of what you're doing currently, ruinning separate software for Stars, 888, and Party. SaT would be one software to handle it all. Some people use SaT only for the hotkeys and not for the table movement.

But unfortunately you're looking to have all 4 or 6 slots act as stacks of tables. Currently SaT cannot handle this, but that might change at some point

When you say one stack slot, you mean like all the tables in one slot where its like cascade?


Well my requirements are basically have the tables tiled and the size of tables to be regular size. Thus i would have 4 tables at 1920x1200 resolution now. But if i do 6 tables, i know the table has to be smaller. But would it be possible to have 6 tables showing with 3 on the top and 3 right below it? Then say very few tables left... you press a key to make it to a layout where its 4 table only at regular size? Thus if you have a lot of tables and other sites like party and 888, then have a 6 table layout with a smaller size table. But when there are no more party or 888 tables or just very few tables in general, say have it back to a 4 table layout at regular size. So thats what i want to know if it can do that.


Do SaT hotkeys works very good? Example so rarely you would have misclicks when tables pop up? Because i use tableoptimizer for stars and 888caption and partycaption for the other sites and if i have partypoker table in one quadrant and stars on same one, i have to be careful to not click too fast since tables pop up over each other. And many times it doesn't even pop up and i have to manually click on it.

A stack is when there is one location with multiple tables all directly underneath each other. I was under the impression this is what you were looking for, for all 4 of your quadrant slots. SaT only has one stack. All the other slots would only hold 1 table each. See the demo video on the website. This may change in the future.

This would require you to manually change your layout when you get down to however few tables you want.


The whole purpose of SaT is to not have to deal with all those tables popping over each other. With SaT, you turn off each site's option inside their client to "pop up tables when action required". After doing that, no tables pop up for no sites, since you've turned it off. And then if SaT is set up properly, then SaT is the one who brings the tables up at the correct time, so you avoid all those focus stealing issues. This is the whole purpose of SaT.

Hello

I can't buy stack and tile. Some message pops up says the VAT ID entered is incorrect or does not match the country you selected.
and that i have to leave the Vat field empty
I'm from the Netherlands, i've used stack and tile before.

Gr Michel