Can you please run though this Test and specifically for the scenario when facing an all-in? You can simulate the all-in situation on Play Money by just betting 99% of your stack and then folding. And then next hand you'll always be facing all-in

There are also potential solutions on this page for you to try:

http://www.stackandtile.com/sat/help...op-incorrectly

Let me know the results and we'll go from there

Just wanted to add to the gratitude for getting out v2.94 so quickly following the ignition update. I've had an issue where maybe 1/15 tables refuses to resize and is ignored but un-ignoring fixes it no prob. Besides that the program is working fantastically as usual, unlike most ignition-related things lol. Thanks again

You mean the dev version v2.94s, shortly I will put out the final release v2.95

But yes thanks, please tell your friends! That resizing issue is a big problem that I can't seem to eliminate, and I don't think I will be able to unless they put out an update fixing it themselves

I've upgraded to 2.94t and an Ignition table can be detected using the DWM scan mode, but I'm unable to set up hotkeys when I get to the 2nd step, F10 to fold. I've tried removing/adding the site four times with each scan mode, but none of them work. DWM is the only one that detects a table, but there is zero functionality after that.

During Include Site setup, F9 to detect the table has no bearing on what Scan Mode you choose. So that should always succeed.

F10 to Fold should always Fold your hand, but if you get the "Button detected as black" error, then that would be affected the Scan Mode.

What version of Windows are you using?

Right, I get the button detected as black error. Windows 10, but I've been having issues with it lately. Apparently, I had a wonky version and my license isn't activated now. That would prevent StackandTile from functioning? I never would have guessed.

With Win10, if its failing with DWM scan mode, then you'd need to try PW scan mode as suggested.

If your license is expired and your trial period is expired too, then SaT won't work to pick up any tables when you press Start. But it should still allow you to Include the site without issues

Are you referring to my Windows license or SaT?

SaT works with play money but not real money. What's up with that? I definitely have a valid SaT license, at least I should because I was just charged for it.

I'm referring to your SaT license. Did you input your license code correctly? Click on the About tab and then click the Register button. PM me and tell me what license code you're using and also your registered email address

I just upgraded from win7 to 10 and removed/re-added the BodogIgnition configuration for Ignition. I'm now having an issue where the program doesn't seem to be recognizing when a table in the stack requires action, or when I've entered a pot and there's a flop. Also if I try to manually select a table within the stack where I know action is required (using taskbar icon previews), the table that was originally visible will instantly snap back to the top of the stack. Other sites (ACR, carbon, betonline) seem to be working fine.

I've tried changing the scan modes as well as removing/re-adding the configuration several times (ensuring that I'm clicking the solid white area of the hole/flop cards). Any idea what the problem could be? Thanks

Nm think I got it, going back through the win10 troubleshooting page and running ignition in win7 compatibility mode looks to be working

It sounds like SaT is just always thinking that the tables are requiring action. This would explain why, when you try to click on another table through the taskbar, the original table snaps back to the top. Because SaT is thinking that original table still requires action (even though it doesn't). Usually you would go through this page to troubleshoot that:

http://www.stackandtile.com/sat/help...op-incorrectly

However, on Win10 I'm pretty sure you would need to use PW scan mode for this new BodogIgnition update. And then try to Remove and re-Include the site

Hrmmm ok, if its working, then thats good. I hadn't tried running the software in compatibility mode, so that's good to know.

Please run that Test on the page above just to be sure that SaT is detecting when action is required properly

Yeah I hadn't seen that test page before posting, you're right that SaT was thinking that the table constantly required action as it was failing the test. I haven't played a full session yet but changing the win10 settings (win7 compatibility mode and override high DPI scaling) seems to have worked without needing to switch to PW scan mode. I'll update if there's an issue when I play next that isn't fixed by switching to PW and removing/re-including.

Ok cool

hi greg is there an update for the new bovada update where the tables keep movin around and resizing?

I haven't found one yet. Can you try using 100% scaling in Windows and tell me if that fixes it?

Hurricane is coming so I will probably not be availalble for a while

stay safe..

I'm having an issue with table slots not showing up on my monitors (they're open, but magically offscreen). I've exhausted most normal options with other windows and am having no luck. If anyone knows a work around it would really be appreciated. Thanks

Just use the minus button and reduce the slots down the the visible ones, and then use the plus button to add them back, and then use Visualize Grid to place them

I cant prefold on Winamax it doesn't tick the box, what can I do?
I'm played tiled and I have a fold(and stack ) hotkey and the site is Winamax small.

Thank you, I see the problem too. Can you please download this version v2.94v

http://www.stackandtile.com/sat/tmp/...Setup-294v.exe

and test it and tell me if that fixes it?

Anything on the latest bodog/ignition messed up? The tables pop into the box but then start moving and changing sizes. Then an error code comes up saying it has tried to resize the table 3 times but didnt work so now the table will be ignored.

Getting this too so I haven't been using the software for a while now.

There is nothing new.. Their software is messed up and I haven't figured any way around it. When I drag and drop a table, the table resizes itself on the drop. That happens even without SaT. Does that happen for you guys? Until they fix that, there is not much I can do...

Currently have no issues with that. Have been able to drag the tables to different parts of my monitor without them resizing at all. On windows 7 with scaling at 100%.