yea thats probably easier

very very strange, i've never seen that before. i dont want to say that you're doomed, but you will need to be VERY specific using the include/exclude title texts, because the include_title_text will need to be specific to ONLY your boss IPN pokersite. for example, you wont be able to use:

include title text = $

because every site will have the $ symbol in their title bar. youll need to find a unique string that only boss ipn tables use, and then it might work. for example "Poker Heaven" (from your winspy paste) if thats the name of the skin and they put that in every title bar, then it might work

greg,

would it be possible to read the text "backwards"
I think the only way to differentiate them would be to exclude "Poker Heaven" and include "- Poker Heaven" (but this include would need to read "right to left"

tbh from expeirience never have high hopes stuff works with IPN it would been a bonus.

no, right to left its not possible

what are the titles of the lobby and the tables?

greg, ill pm u instead of taking up the thread and see if we can find a solution.

another q, after i create a site with CustomSiteCreator and than go into SaT and set it up in sites and press F9 it resizes the table, and it seem to resize it into the slotsize i have setup in grid. However this is not the size i used when i did setup the coordinates for the buttons, and than it dont hit the fold with F10.

What i just done now is that i use the same size as i have in my slots and that works but wondering what it is that im screwing up, or if this is a "bug".

dont worry about it

in response to your PM:

well the number and tablename will always change, so we cant use those for the "include title text"

i was asking for just full title texts of tables so we can look at exactly what is there and what isnt. is the "Poker Heaven" text anywhere in the table titles? i guess it does, since this is what your winspy table title showed:

2 - €5k HH Sat RB - Tournament: 49249955 - Poker Heaven

if the lobby just says "Poker Heaven" withOUT the preceding dash, then maybe we chould just use

include title text = - Poker Heaven

and nothing for "exclude". youll have to test with the CustomSiteCreator and see what gets highlighted

yes this is the table name

2 - €5k HH Sat RB - Tournament: 49249955 - Poker Heaven


the start here is the table number, and the table number goes 1,2,3.. for each new table i open, unless i close one of the tables and open a new, than that table will fill in the missing part in the sequence, so if i have 1,2,3 and close table2 and open a new table this new table will get the table number 2.

edit: did u see my previous post, was that what u meant i shouldnt worry about?

i meant dont worry about clogging the thread

see my last post, i made some edits

yep v nice! That did the trick.

Hi there,
I just setup StackandTile and I have 4 slots. I want to setup slot 1 for all the tables stacking. slot 2,3 & 4 for tables required action. and when I make an action(click on fold, check, bet/call), I want that table to move back into stacking slot #1. and when table required action from slot #1, I want that table to automatic move to slot 2, 3 or 4. Is that possible and how do I setup/configure that?

Thank you for your time and help.

I play around with the software and I am able to fold+stack the table to slot #1. I play on Carbon and I set "Bring Active Game To Front". The active table behind the slot 1 won't auto move to 2, 3 or 4.
here is my setting:
stack slot: 1
New Tables slot: grid
total slots: 4
Tile Setting: preflop
hotkey: Fold + Stack Table
Send to table under mouse.

also, on Carbon table, there is a "All-In" button where I can click and it go all in. can I make it "All-in + Stack"?

Thank You

stack slot = 1

hotkeys for:
fold+stack
call+stack
bet+stack

tile setting = preflop




looks like you set it up well. if active tables arent moving to grid, its because the Fold button wasn't grabbed correctly during Include Site setup. may i ask, how are you using Carbon with SaT? did you use the CustomSiteCreator.exe to create a carbon config?

greg, has there been a solution to UB yet? The problem in ub was that u dont get fold button right when u "cant" fold. Have euro site working the same way.

The movement to grid from stack are based on the fold button correct? So temp solution is to put fold as call right?

yeah that is the temp solution, however then any "fold" hotkeys wont work properly, such as "fold+stack", they will click CALL instead of FOLD, so DONT USE FOLD HOTKEYS if you use this temp solution

i'm working on a fix. whats the euro site that does this? can you post screenshots?

had misstaken, wasnt the case after all.

edit: had a questions about sitout tables, as i understand u read the fold button for when a stacked table go into the grid, wouldnt it be possible to read the sitout button the same way to tile a sitout table?

when i click fold on the pokerstars client it stacks my table, anyway i can stop it doing that? it never used to till i got this update one

yeah this is possible too, but if tables break and youre the only one left, sometimes there is no sit out button, and this table gets 'lost' in the stack too. i have a working solution for 'old tables' where it should detect sitout and other tables if a table hasn't required action in lets say 5 minutes (no fold button visible for 5 minutes). but i built that outside of SaT just as a test, so it will take some time to integrate it in


yeah i changed the default setting. you can turn this off by going to Advanced Options and unchecking "Left Click Detection"

Thanks Greg

I am still testing and playing with your software. it's awesome software. I just have to get it working correctly for SnG tables.
Yes, I use CustomSiteCreator.exe to create a carbon config.

on Carbon table,there is 4 action button, "FOLD, CALL, BET, ALL-IN". When I click the "All-In" button can the table go into stack?. Can I make it "All-in + Stack"?

Also, when a table is finish or sitout in the stack, how do I know or get it to tile into the grid?

Thank You so much.

glad you like it, tell your friends
so i guess you have it working now? tables correctly move into grid when there is action on you?

at the moment there are only hotkeys for (fold,call,bet)+stack. in the future i should add a 4th button option like you are asking. i probably will do this at some point, but its not gonna happen soon i dont think.

i have an idea though. i dont know if it will work, you can try. I THINK you could get around this if you are willing to use your mouse to click the allin button. so heres what you do, go through the CustomSiteCreator again and this time for example when it asks for the coordinates of the Fold button, pick the ALLIN button, and drag around the ALLIN button too. then save it as a new file.

now open the new file and find these settings:

however, these won't really be for the fold button, they will be for the allin button, since thats what you clicked on in the CustomSiteCreator when it asked for the fold coords.

now, go back to your original config, and the buttons line to include "allin", and then copy those fold_button* settings from the new config into this one, but RENAME the fold_* prefix to read allin, like so:

finally, make sure Left Click Detection is enabled in Advanced Options. now, HOPEFULLY, when you click the allin button with your mouse, the table should return to stack. i can't guarantee that this will work, but it might.

this feature is second on the to-do list. ive mentioned it above, it will be called "old tables". but not possible at the moment.

thought i just ask instead of trail and error,

if i have more tables than slots in tile setup where will possible extra tables go. Example i only have 4 slots with stack a slot 4 and 10 tables running and got 6 tables req action. What will happen to tables 4-6?

they should stay in the stack, and pop to the top of the stack for you to act on them

hrmm.. i just tested this on fulltilt and it worked properly. table in grid, i click check with the mouse, it stays in grid.

I got it working very well. It's amazing how it works. I'll tell all my friends who multi-tabling.
I setup Fold+stack and Bet+stack. when I use the hotkeys, Xbutton1 for fold+stack and Rbutton for Bet+stack. it works prefect. When I PRESS the mouse button, it does the action and stack.

and when I CLICK on the "Bet button" on the table, it doesn't stack and that is what I want. however, when I CLICK on the "Fold button", it stacks the table.I don't want the table to stack when I click on it, I only want the table to stack when I PRESS the Xbutton1 (fold). How do I set it up?
When it gets to heads-up, I don't want that table to stack.

When I use the Rbutton for "Bet+Stack": It works the way I want it.
A pop up window asked me this and I clicked YES
Would you like to pass through the Right Click to the underlying window?
This will mean that you will still have access to right click menus.

Thank you so much for your time. please make the software commercial so I can buy it.

cool.

turn off Left Click Detection in Advanced Options on the About tab

not sure what you mean here. but if you look at the hotkey for "keep table in grid", then you can toggle a certain table to keep it locked in grid, and it will no longer respond to any "stack" hotkeys. you can toggle it off again as well when youre done.

i'm working on it
gotta do some bug fixes first

i just got around to testing this, new tables slot = 0 doesnt move any tables for me, wherever stars opens them is where they will go