Open Side Menu Go to the Top
Register
SiQ SpinReg SiQ SpinReg

03-14-2017 , 08:03 AM
What causes software to stop working in middle of session? Happens rarely, but it does for me and for few others who I know using this software. It's not AFK related.

Timer just stops out of nowhere and we need to restart session to keep tables opening.
SiQ SpinReg Quote
03-14-2017 , 08:14 AM
In almost all reports I've gotten similar to this, it was because the user didn't notice that the Session Minutes had passed before the games.

When this happens, does the Pause Button disappear? If so, it's because the session is over.

Just in case, can you email me thesiqsoft@gmail.com your error.txt file inside the SiQregSpin/log folder?
SiQ SpinReg Quote
03-14-2017 , 10:17 AM
Quote:
Originally Posted by SiQ
In almost all reports I've gotten similar to this, it was because the user didn't notice that the Session Minutes had passed before the games.

When this happens, does the Pause Button disappear? If so, it's because the session is over.

Just in case, can you email me thesiqsoft@gmail.com your error.txt file inside the SiQregSpin/log folder?
It surely isn't games limitation as it's set to 999. I don't remember about "pause button". Next time it happens I'll give it a closer look and send error.txt if I remember.

Once I forgot to close software after it happened and it started opening tables after few minutes delay. Luckily I was still near computer that time.
SiQ SpinReg Quote
03-14-2017 , 10:59 AM
From someones stream: https://www.twitch.tv/videos/128622042, around 30 minute mark. Sometimes timer gets stuck and continues working later or stops entirely, who knows.
SiQ SpinReg Quote
03-15-2017 , 04:01 AM
Quote:
It surely isn't games limitation as it's set to 999
good to know.

Quote:
Next time it happens I'll give it a closer look and send error.txt if I remember.
you can still send the error log. it might give me some clues.

I can't open that twitch link. It says the content is unavailable.

I have a feeling that this could be an issue with connectivity to PokerStars. That we register the game - but when we try to confirm the buy-in, the connection to PokerStars is dropped and PS never actually registers the game. SiQreg waits for some time after it clicks register for a new game to open up, so it could hang in this instance.
I'll get to work immediately on an improvement to handle this situation better. Hopefully that is what the issue is.

Thank you for getting this info to me.
SiQ SpinReg Quote
03-16-2017 , 03:24 PM
I am one of these streamers. The error.txt looks like this at the end:

confirm buyin :: 20170316193750 :: buyin popup didn't close at attempt 1
confirm buyin :: 20170316193903 :: buyin popup didn't close at attempt 1
confirm buyin :: 20170316193926 :: buyin popup didn't close at attempt 1
Waiting For Table :: 20170316194011 :: Didn't catch table opening after 30sec
Waiting For Table :: 20170316194055 :: Didn't catch table opening after 60sec
confirm buyin :: 20170316194721 :: buyin popup didn't close at attempt 1
confirm buyin :: 20170316194746 :: buyin popup didn't close at attempt 1
confirm buyin :: 20170316194832 :: buyin popup didn't close at attempt 1
confirm buyin :: 20170316194856 :: buyin popup didn't close at attempt 1
confirm buyin :: 20170316195017 :: buyin popup didn't close at attempt 1
confirm buyin :: 20170316195043 :: buyin popup didn't close at attempt 1
confirm buyin :: 20170316195159 :: buyin popup didn't close at attempt 1
confirm buyin :: 20170316195512 :: buyin popup didn't close at attempt 1
Waiting For Table :: 20170316195619 :: Didn't catch table opening after 30sec
Waiting For Table :: 20170316195700 :: Didn't catch table opening after 60sec
confirm buyin :: 20170316200550 :: buyin popup didn't close at attempt 1
confirm buyin :: 20170316201200 :: buyin popup didn't close at attempt 1
Waiting For Table :: 20170316201430 :: Didn't catch table opening after 30sec
Waiting For Table :: 20170316201515 :: Didn't catch table opening after 60sec
SiQ SpinReg Quote
03-16-2017 , 06:12 PM
Perfect, thank you.
It looks like what I assumed about the PokerStars network connection failing may be the issue.

I am working right now to handle this better so you don't have to stop/restart SiQreg every time this happens. Hopefully will have that out in the next few days.

Siebenacht, brokeinasia, if you can PM me with your details I will credit you a free month of SiQreg for helping me find this.

Thanks!
SiQ SpinReg Quote
03-20-2017 , 03:21 AM
Any other payment method? skrill? neteller? i can pay with either but i dont have a card
SiQ SpinReg Quote
03-20-2017 , 04:04 AM
I can take a 3 or 6 month subscription on Skrill. I'll PM you details.
SiQ SpinReg Quote
04-06-2017 , 11:13 AM
hi, my english is bad, i hope you understand me.
i play in .com spin $7 and very soon $15, what version should i buy???
accept neteller??
SiQ SpinReg Quote
04-06-2017 , 01:50 PM
Hey,
"MS" version. That's the minimum version that you can play $15's with.
SiQ SpinReg Quote
04-11-2017 , 10:21 PM
hi i can open 2 tables and stars again when i finish this 2 tables so dont have one tables in blinds 10/20 and other in 40/80 ???
SiQ SpinReg Quote
04-12-2017 , 01:43 AM
Quote:
Originally Posted by generic91
hi i can open 2 tables and stars again when i finish this 2 tables so dont have one tables in blinds 10/20 and other in 40/80 ???
Hey,

Have you seen this option?
Code:
If HU on [ ] Keep open [ ]
You could set this option to be
Code:
If HU on [1], keep open [1]
Since you should be heads-up more frequently when the blinds are higher; this setting will make it less likely that you are starting a new game (10/20) when you are on another game that is (40/80). But this lets you play more games/hour because you will still get to add new games when the other table is still 3-handed (and more commonly this will be when you are closer to 10/20).

Do you think that would be good enough?
SiQ SpinReg Quote
04-14-2017 , 09:59 PM
SiQreg Spin v1.3.3.4
  • New Feature ( 'Max Active Regs' ): Allows you to focus more when the games are tougher by pausing registration while you are playing more than X regulars.
  • New Goals: Now SiQreg tracks your minutes played per day and per month as well as your games.
  • New Option: Have SiQreg automatically adjust your daily goals (games and minutes) to make sure that you reach your monthly goals.
  • A lot of safety and user experience improvements. Easier setup, more checks to make sure that you have everything setup correctly, and better handling of issues so your sessions can continue more smoothly than before.
SiQ SpinReg Quote
04-15-2017 , 08:45 AM
Two users had an issue that I wasn't able to fix. I need to get some sleep so for now I've rolled back to the last version.
SiQ SpinReg Quote
04-15-2017 , 05:11 PM
Getting a message, "could not find sruupdater.exe" It is on my computer but not valid for some reason.

Can you advise, program is not working at all.
SiQ SpinReg Quote
04-15-2017 , 06:01 PM
That's odd, sending you a PM now.
SiQ SpinReg Quote
04-20-2017 , 11:05 AM
New version sounds great cant wait for it!!
SiQ SpinReg Quote
05-01-2017 , 06:37 PM
hi SIQ any update is release soon?
SiQ SpinReg Quote
05-04-2017 , 02:23 AM
Hey Ronaldo,
I'm still working on it. Hopefully soon. I will send you a PM when it's finally ready for testing so you can get an advanced copy of the new version
SiQ SpinReg Quote
05-05-2017 , 08:05 AM
Quote:
Originally Posted by SiQ
Hey Ronaldo,
I'm still working on it. Hopefully soon. I will send you a PM when it's finally ready for testing so you can get an advanced copy of the new version
:he art:
SiQ SpinReg Quote
05-07-2017 , 03:56 AM
I've put up a new BETA version (v1.3.5.18) at https://siqsoft.com/downloads/siqregspin/beta for any subscribers that want to test it.

This version does not have the 'max active regs' feature, which I should be able to get up this week. But it does have all the other features I mentioned from v1.3.3.4 above.
SiQ SpinReg Quote
05-08-2017 , 10:17 PM
New version 1.3.6.13 brings back all of these features:

Quote:
Originally Posted by SiQ
  • New Feature ( 'Max Active Regs' ): Allows you to focus more when the games are tougher by pausing registration while you are playing more than X regulars.
  • New Goals: Now SiQreg tracks your minutes played per day and per month as well as your games.
  • New Option: Have SiQreg automatically adjust your daily goals (games and minutes) to make sure that you reach your monthly goals.
  • A lot of safety and user experience improvements. Easier setup, more checks to make sure that you have everything setup correctly, and better handling of issues so your sessions can continue more smoothly than before.
SiQ SpinReg Quote
05-09-2017 , 08:28 AM
GREAT!
For the Max Regs, can explain it? All I see is max regs and a number. Say if I am wanting to play 4 tables, with at most 3 regs, would i put 3 in this box? But then what if i only end up with 2 games running because high MULTI and there are 3 regs on these 2 tables, it will know not to reg me for new game? TY!
SiQ SpinReg Quote
05-10-2017 , 12:00 AM
Quote:
Originally Posted by RonaldoVamos
GREAT!
For the Max Regs, can explain it? All I see is max regs and a number. Say if I am wanting to play 4 tables, with at most 3 regs, would i put 3 in this box?
Yes, exactly. If you set '3' in that box, then no matter what else is happening if you are sat against 3 tagged regs then the session will not register a new game until one of those regs is gone.
Keep in mind that SiQreg checks to see who is a reg once when the game first starts, and once when you get HU. So if you tag a reg after a game starts then SiQreg won't know that person is a reg in that game until you get HU with them. I'll be working to improve this soon.

Quote:
But then what if i only end up with 2 games running because high MULTI and there are 3 regs on these 2 tables, it will know not to reg me for new game? TY!
Any of the filters ('keep open', 'if hu on [ ] keep open [ ]', 'max multipliers', and now 'vs regs') act on whichever is lowest. So if you hit your 'max multipliers value' then the session will stop registering. If your running multipliers value goes below the 'max multiplier value' then SiQreg will see if any other filters are exceeded (like if you're playing vs too many regs, or HU on too many tables, etc) and if any of them are exceeded then SiQreg still wont register until all of the filters are below their max.
SiQ SpinReg Quote

      
m