how do i always keep 20 tables of 180 mans open? It would open 20... the once tables i bust... it doesn't register for more. Then when i turn off and on... it goes crazy and register every single time etc...

Here is the simpliest configuration:
SnGOpener Settings:


SnGOpener Session Rules:


SnGOpener Session Options:


This will keep you open 20 180max SnGs.

Regarding the crazy stuff:
When SessionLord SnGOpener is started, currently it cannot detect the already registered SnGs in the lobby, so it tries to register to them. We will implement a solution for this to avoid such situations. Probably by the end of May it will be released according to our roadmap.

Till that time we suggest to start SessionLord with clean sheet, so please avoid to have already registered SnGs in the lobby when you start SnGOpener.

Also, when you stop SnGOpener and start it again, you will be faced with the above mentioned problem if you have some already registered SnGs in the lobby. If you need to stop the registration in the middle of your session for a while, please use instead the play/pause swither next to the on/off button, and this problem will not occur.

Okay but for 20 tables opened... do i just don't check total tournaments and minutes? Thus only do that... that way its always 20 tables no matter what? Or do i have to have either total tournament or minutes checked?

Without checking the total tournaments or minutes, SnGOpener will never stops automatically, you have to stop the registrations manually, when you do not want more games to play. If you check the total tournaments and set it to for instance 60, it means SnGOpener will automatically stops registering to SnGs when 60 SnG is reached in total. If you check the minutes and set it to for instance 60, it means, SnGOpener will automatically stops registering after 60 minutes. So you can control here the end of your session. If both setting is checked (total tourney and minutes), then any of them is fulfilled, SnGOpener will automatically stops registering.

Hi Guys any one have a quick fix for me,

I was having all sorts of problems getting SL to work at all but now have got it searching for a sit and go type and seems to be doing that ok. But when i try to add another under settings, i press add and it adds another copy of the one i have running but when i go to change the parameters none are adjustable. in fact the tabs are greyed out XMAX for example.

I have checked all the site videos and appear to be doing everything right So close.. any clues ?

Regards

Steve

SnG type modification is disabled when SnGOpener is turned on. That's why it is greyed out (disabled for editing).

In Settings/SnGOpener you can define so-called "SnG types" which describes a given type of SnG game (by defining type, speed, buy-in etc). You can add as much of that as you want.

In SnGOpener menu Session Rules section, the combobox above the rules table contains all of your SnG type. With the add button you can add a new rule to the table below that's assigned to the SnG type currently selected from the combobox.

In Session Rules you define which type of SnGs you would like to get registered in your current session with some more filtering (Sng< settings, etc.) You do not need to use all of your SnG types in session rules as probably you want to play different SnG types in different sessions. So for your session you have to build up the Session Rules.

A SnG type can be added several time as a session rule, so you can define several rules for a SnG type. This is useful if you want ramp up feature with Pro version. For instance for the first few tables you setup a lower weight limit just to get start more faster. For ramp up you have to use Sng< and Sng>= columns, which controls that a session rule is exactly valid for registration if at least "Sng>=" SnG are running currently but no more then "Sng<".

SnGOpener will register to an SnG if:

• There is a matching Session rule (the SnG type is matching (speed, type, buy-in, etc.) and rule filters are matching (remaing seats, weight, Sng< and Sng>=)
• You have not reached the Max/Type already from the given SnG type
• And you have not reached the maximum defined in "Keep X tournaments" settings in Session Options

Hope that helps

Thanks for that, that is what i am looking for.

At the moment i now have it searching for 3 diff types of games but not registering me for any.

Setup I have:

Under SngOpener. Session Options i keep 12 games open showing a total of 12 tournaments.

Session rules 3 sng of 3 diff types each 10 each.

Green button showing on and a white arrow on green background

See what sngopener is doing. - Just searching but not registering to any

I am obv doing something wrong ?


Steve

The most common configuration problems are:

1. the max/type for SnG type is not configured well, and you have already reached it
2. Sng< and Sng>= is not correctly used.

As I described it in my previous post, Sng< and Sng>= defines an interval for currently running SnGs (where you are playing currently) to extend the meaning when this rule will be valid.

For instance, if you set ALL of your rules with Sng>=3 and Sng<5 ALL of your rules will be valid only when you have currently at least 3 SnGs running but no more than 5. Of course, in this case never ever nay of your rules will be valid to register for a game, because you will start from 0 SnGs running.

So please validate this and set Sng>=0 and Sng<999 (to defaults), which means your session rule is NOT limited by (filtered based on) the number of currently running games.

o might have it i had 3 set in sng> of session rules, change it to 0 and it is loading.

OMG painful. it kept flashing madly and beeping saying alternatively register. full registered full. i couldn't even play the tables i had open.

The principal of this programme seems sound but i guess it still has some serious issues and it is not clear how to set ip up or to solve problems. Any idea sir.

Cliffs:

Now appears to be loading but going mental during this process?

Nearly there i am sure

Regards

Steve

SnGOpener does not identifies your already registered games in the lobby on startup and it will keep try to register to it until it will disappear from the lobby. So I guess you turned off than turned on SnGOpener while you had some already registered games in the lobby.

If you do not mess with the ON/OFF button in the middle of your session, there won't be any problem.

According to the development roadmap this month there will be an improvement for SnGOpener to identify the already registered SnGs in the lobby and already ongoing games on startup, sync the state and continue your session according to it.

Ty very much for your patience Sir much appreciated .

Steve

You're welcome!

If you have any question, do not hesitate to contact us via this thread or via mail.

Any ETA on an update for 10095 UK? I don't have any files in my backup folder since it's a fresh install. Also, not sure if this has been suggested, but have you thought about a hotkey to pause SL. Would be really helpful.

Thanks

On Sunday we will release a new version of SessionLord where all the new PS versions will be supported. Until that time, you can get an older version of PokerStars from our archived list:
https://www.sessionlord.com/download...20Versions.pdf

Hotkey for start/stop and pause/resume SnGOpener is already implemented along with AFK protection in our beta program and will be released also soon for production (in about 1 week).

Awesome, thanks for the fast reply.

Hi,

Could you please have a look at my settings I am clearly doing something wrong. I want to check it is working properly before I put in the specifics I want to play so trying the below. This is on my laptop and it just does not search for any game. I obviously press the off button to on and it changes to green.

I have the same settings on my desktop and that works ok (If I haven't I can't see the difference)

So close to being perfect for me.

Regards

Steve

PS I have checked I have the update from stars and yourselves.

Please set Max/Type column values more than zero. (for example 999 )

TY Boss, great support.

Cant log into sessionlord... says current version not supported. Anyone else?

Nevermind... so i have to update it to latest version each time?

We just forces releases very rarely. The last forced version was released on 11th of February 2015 and there were 39 releases from that date. Probably you were using a really old version of SessionLord.

In the beta program of course we force almost every release to keep all beta testers on the same level.

Hey I like the auto coloring a lot. I was wondering if you could add the feature for scanning MTT's as well. That would help get large amounts of players at a time. Thanks.

Good idea, we have added it to our roadmap.

Is there a reason its taking very long to register for 180 mans? When i start it, it would register for a 15, 8 and 3.50 rebuy but once it registers for one of these, it sometimes doesn't register for another 3.50 rebuy or if it does, it doesn't until much much later. Earlier, it would pretty much register another 3.50 rebuy or 8 or 15 pretty quickly...