This is the support thread for PokerPlaner, which is a multi poker network tool.

Hmm what happened to the other thread? Oh well. Still lots of bugs, at least for enet :

1) It still doesn't recognize my username in fishfinder - does it read it directly from the lobby or from pt3? Because in pt3 it is set as an alias so wondering if that could be an issue.
2) The filters don't work a lot of the times again in fishfinder - after a scan for 4 and 6 player tables at my limits for instance, I may uncheck 6max to only look at 4max table but the maority of them still appear, or viceversa
3) Scanning the nl150 limit is broken, doesn't work at all although it is present there
4) The tables shown on the left don't get update although they were just scanned again, they still show old results as though they were from a cache or something. Really annoying this one

Hope you can get those fixed soon

^^ nice first post.... anyway, it's called support thread anyway

other threads are locked because my tool is commercial and if i want to post links/pics/.... i need to pay for it or can have a free thread just for support....

1) In Settings->Sceennames you need to enter your nick names. FishFinder scans the lobby and than compares scanned names with your screennames.... so, you should check if it identical.... only known issue are screennames with whitespaces, here you would need to enter your hero name without whiespaces, as scanned names will have none....

2) check if fishfinder scans the info correctly. As it's done via OCR, it might be wrong. if so, i need to know the skin to fix it

3) hmm, be more precise, what is broken.... NL150 are not scanned at all (all filters off)

4) i guess you refere to the player list!? This might happen because the lobby shown when selecting a new table a cached info about that table and updates it a little later with new actual data. PokerPlaner doesn't know if there will be an update or not. For tables where number of players doesn't match the current scanned naumber of players, PokerPlaner waits some time for an refresh (f.i. when you select a table for first time)

Yes, sorry for the deluge on to it

1) Yeah we've been through this before, name is entered correctly and no white spaces, show playing on and show waiting on are unchecked.

2) Skin is bluff gaming but same problem was with npp as well. The info is correct as far as I can tell

3) Well I see nl150 is available in limits in version 297, so I filter min nl100 max nl150, click speed scan, only nl100 tables get scanned nl150 tables don't show at all, nether do the players in them. No problem with any other limits set here.

4) Well yeah, I don't see the point in doing that, the whole reason for doing a new scan is because you want to see what's updated, if there are new players on those tables etc. - so I think you should rewrite the cache with every new scan - or another option, when you select a new table in fishfinder have it scan that one right there, similar to "scan current" although without manually having to go to that table in the lobby first

1) odd, could swear it was already working.... but it was only for showing tables, was not working for coloring tables you play on...... that was this issue you had!?

2) can you please explain more details... i just scanned on Bluffgaming, all limits and seats.... afterwards i stoped scan and deselect all but 4+6. than i unchecked 4 and those table disapear, than i unchecked 6 max and checked 4... all looking ok... maybe you can give me a screenshot!?

3) you are right when you set min and max to nl150, internal it was nl100 through a bug....

4) guess you missunderstood.... i do NOT cache. The skin does. I already use some indicators to decide if i should wait for the lobby to refresh or not. f.i. when number of players do not match.... but i could add an option to wait always ~3sec for the update to take place.....

1) no it never worked for me, it always shows the tables I'm playing on / sitting on (with my name visible just as entered in settings)

2) well sometimes it does work like this yes, other times it doesn't I will try to make a quick camtasia video

3) glad you worked it out

4) Ok that makes more sense, could you add an option to auto-scan the table highlighted in fishfinder tho so it updates right when clicking on it?

4) might be a good idea....

will upload a new release maybe this evening.... (without 4) )

see release 299

The filters (don't show waiting, etc) are supposed to only work for the viewing the tables, correct? Is it normal that the players will still show up on the right, even if the table they are on is blocked?

If so, could I please suggest that this be a feature you change in a future version? That would be amazing! I generally search for big fish themselves, as opposed to searching through the tables.

In the meantime, can someone think of a way I can more efficiently cycle through the players? I waste a lot of attention joining the same table each scan because there is still a big fish on it. I tried doing the "old playerlist" too but everyone still shows up

Thanks! Awesome product!

edit: actually, now I realize that it isn't blocking the tables either. It WILL add color to ones I'm waiting on, which is helpful, but it doesn't do the same thing for the players' names. If I could just add a color to the names of people on a table I'm waiting for/playing, that would be totally fine. I'm using 299 too.

on ENET, it's not known if you are in waiting list of a table (would need to switch between player and waiting list), so only playing on and viewing is working....

what does "table is blocked" mean?

basicly you can add fishes to your buddylist, assign a color and notes, than in the buddy column(checkbox) is marked..... i recently recognized the color is not shown very well as the checkbox does cover most of the cell, so i most likely change the blue color of players in your buddy list to the color you assigned to your buddies, so you can more easily separate buddies by colors.... btw, you also get the assigned note of a buddy when you move the mouse to checkbox.....

seems i found a good solution for this. i now compare player and seats after a scan with a scanned version before. If player and stacks match, i expect there should have been some change and wait some time for a refresh to take place....

just not sure if i should do this always or add a minimum time betweens scan to expect a update...... f.i. is between two scans only 5 sec, it rather likely that the was no change yet....

Viewing doesn't seem to work for me either, but I will try to work with buddy list in the meantime.

By "table is blocked" I mean not showing up in a scan. Filtered out, so you don't have to scroll through the ones you are already on/waiting/watching

make sure the tables you open are in the table list, otherwise you use a not yet added skin. In this case i need to know it name and link to homepage to add it....

- only issue, however big this might be seen, is that a table will never disappear in the scanned table list. so, if onced scanned in the lobby and than closed for maintance f.i., the table is still listened. You would need to clear results to remove it......

================================================== ==============
Version 1.40 - Build 300
- FishFinder: coloring "playing on" now working
- FishFinder: lately added NL150 filter was internal NL100
- FishFinder: changed buddy marker from checkbox to "x", so the assigned color is displayed better
- FishFinder ENET: now i expect a change of the playerlist / stacksizes
after scanning a table after some time (60s) again i expect some changes
if there are none, i expect a refresh of that table in the lobby....

Version 1.40 - Build 302
- APN: added support for tournament files

K well reporting now after I tested the new versions

1) Finally the tables I'm playing on are blacked out. An option to have them not appear would be nice too

2) Well I think I figured out what is with this now - the thing is it still always show the table people in my buddy list are on, regardless of what I filter. So if I want FF to only show me 4max tables for a selected limit, it will still show me all scanned tables if they have "friends" in them. This should be fixed imo.

3) Fixed

4) Not exactly sure how this works now, as I'm using the players tab more than the tables tab now to select.

Ok so only number 2) is outstanding, good job so far. Will probably have more bugs for you, but giving you a break now

Asking for some new features though: Automatically put you on waiting list for tables the people in your buddy list are playing, if they meet certain criteria - stack size is important to me. So say if they have > 50 bbs after scanning it should auto-put me on the waiting list for them. I guess this could only work after the scans are over, perhaps a separate button for it?

Also, I would like to get the auto-rebuy for Enet but I don't want to deal with HEM converter, as poker planer uses a lot of CPU as it is, along with PT3 auto-importing hands. So can't you just make it read from hand histories directly? intercept them a second before letting pt3 read them for instance. Or read the status from pt3 itself

Have a nice evening in cold Berlin

Alex

1) ??? i thought now it's blacked out = not appear
2) it's the way it's meant, when a buddy is on a table, table will be shown regardless of filter, if you don't want this, uncheck "show buddies always" in filter menu

*) auto joind table with one buddy > 50bb could be done while scanning
**) cpu loadof pokerplaner on my i7 with 12 tables all features on is ~12%, autorebuy is already based on handhistory.... only rebuy to any other abount than max needs to scan the rebuy window, which does not take much cpu load...

^^ inside the house itÄs warm :P

k, so for both 1) and 2) the tables appeared because they had buddies on them, I unchecked show buddies always

Does that mean I can get auto rebuy without using the HH converter?

to be clear, you unchecked "show buddies always" and table with buddies and not matching filter still does appear?

When i write "based on handhistory" i mean the original handhistory. So, you need handconverter for AUTOrebuy and BetPot.

It is working, before it wasn't because of that setting

Well I'll find you a skype and request a 2-day trial or something for autorebuy and all

I am interested in buying it and pmed you, please provide more information (links, prize, msn/skype or so)...thanks

plz see my profile, i'm not allowed to post links/pics in this thread....

K so now what I would love to have (and I think it's simple to implement) is after I click "join" in the player window of fishfinder that table will be taken out / blacked out from the tables window. I prefer taken out, or give us the option. This is because now I primarily select via the players tab and only when done with those I click on the tables tab to look for unknowns. I don't want to see the tables I'm already waiting on anymore / joined because it wastes time. Doable right?

might not be as easy as it sound, just imagine joining a table might fail, than the table is blacked out.... how would you recover it.... or you joind a table and quickly leave it again.... atm, i think it's not a good idea as long as i do not know if you are indeed in the waiting list, which could be done only by scanning the waiting list.... i rather would do this even if it slows down scanning process a little

If it's easy to implement it in the form I propose, you could just leave it as an option for the user to choose. You could recover it by having the option of showing blacked out tables or not, in fact there already is that option in filters - show waiting on, it just doesn't work for enet because planner doesn't know the tables you're waiting on I guess

As for it failing, yeah a lot of the times it fails to click the join button, but I watch it and make sure I do it manually. It's a voluntary risk people that want to use this option would take. Easily solved by the choosing to show blacked out tables

For scanning the waiting list you would have to scan again, which is very troublesome for people with 1 monitor - I am trying to minimize the screen time the lobby and PP get for that very reason

quick tip for using HEM HUD with 4max AND 6max (thanks to rewket)
1 - create a setup for 6max
2 - copy it
3 - used one on 6max the other on 4max