Sorry, I had to go to bed, it was 5am here.

Yes that is decimal.Those keys bet a percentage of the pot as in the amount of money that is there. so c/o limps $2, $2 BB $1 SB is $5. 100% of $5 is $5, 67% of 5 is 3.35 rounded to $3.40. So in other words those keys are more for postflop....

So you want to raise 3.5 x plus the limper? Best to use the Street Bet hotkey, that would give you $9. If you want to lift the amount you just keep tapping the key within 2 seconds, that makes it lift by 1BB; or you can bump it up or down with your mouse wheel.

Hi. I purchased the software and it worked pretty well. The two problems i have now is that i want the checkbox for autorebuy to max will be autochecked like i had it yesterday with the other version i used.

The second thing is that a popupwindow for autopost the blinds appear when i dont want to post the big blind. (when i want to leave a table and press sitout) it also appears when your software post the smallblind when i had unchecked the autopostblind but for some reason the bigblind jump over my turn and for one smallblind i get the chance to see another round.

(that function is very good but it could be better if you get rid of the popupwindow)

Hi,
Not sure what's wrong with the Autorebuy, will only be a minor adjustment, I'll sort it out and put a patch on the site. Just gave it a go myself and it worked- make sure you have maximum in "Automated Buyin' checked on tab2 and set as the default preferences.ini- not just on adjustable with a full buyin entered manually as the amount you use in 'Buyin amount'. ie, it's programmed to only check from a max buyin.

[BuyinStyle]

DefFullBuyin=1
DefAdjustable=0

Ok, the second one might be just coming to terms with the functionality.

Are you using the 'Play until blind' on the front tab when you want to sit out? You have to press this when you want to leave. Depending on which layout you use things differ from there. If you look on the website 'using Party EzCASH' it explains the differences.

Did the 'Checking the Auto-post blind' window not get closed by the program?

It's always going to force the small blind to post so that you can press play until blind under any circumstance and not get sat out when you've already posted a big blind.

Yeah that's the Party software, under certain circumstances you get a lap for a small blind and because it autoposts you get sat in for that lap.

Are you using the 'Play until blind' on the front tab when you want to sit out? You have to press this when you want to leave. Depending on which layout you use things differ from there. If you look on the website 'using Party EzCASH' it explains the differences.

Did the 'Checking the Auto-post blind' window not get closed by the program?

make sure you have maximum in "Automated Buyin' checked on tab2 and set as the default preferences.ini- not just on adjustable with a full buyin entered manually as the amount you use in 'Buyin amount'. ie, it's programmed to only check from a max buyin.



1. Yes, but sometimes i want to leave just one table because its only sharks there.

2.No, the checking the autopostblindwindow not get closed for me.

3. I only have maximum checked in tab2, all the other fields in tab2 are blank. is it wrong if you always want to have the maximum amount at the table?

Hi Purplecard.

Might have got our wires crossed a bit lol. You should just have to uncheck autopost manually in the middle of a session and the sit out button will wait for you to press it. The exceptions come from the Party side, at that stage my program isn't forcing the blinds to post, it is all working off the Party software. This only forces a small blind to post and uses the control on the table for the BB. There seems to be a few odd times when Party let's you play a lap for a small blind and in those cases it will check it and you're there for another round, particularly when people sitting around you also sit out.

Has this given you trouble before?

I put a patch on the download page for the post window, the autorebuy box and a few other things. Just run it over the top of the same path. Let me know if that solves your troubles.

please bring back table-highlight

It's in the beta iSTRONG, you must have switched to the more stable download. Left margin, 'beta testing'.

Website

I put a new feature in beta 10 and got sidetracked and didn't post about it. I play a few SNG's and the pot size raise presetting didn't really work, too big of a raise. So I thought just the xBB would be nice being preset into the box, but I raise decreasing multiples as the tourney progresses- so I made this thing that you can adjust the amount that goes into the box (or that get's bet by the street bet hotkey) as the tourney or SNG progresses, and you set the blind level that the multiple changes. Then it reverts to % bets postflop. You just bump it up with the wheel if necessary but when it gets shorthanded you just use what's there for the most part.

eg- 4 x BB up to 40 chips

3 x BB up to 150 chips

2.5 x BB > 150 chips.

Seems to work faultlessly so I'll put it in the stable version asap.

Just had another thought when I saw your post again- if you do have beta ten then I moved it to the last tab....

Hello. I downloaded the patch and installed it. The problem with the autopostblindpopupwindow are gone.


But the autorebuy to max checkbox and the auto wait for big blind didnt work more than a couple of minutes.... very strange

Hi,

I was able to get that to happen just now so I'll be able to sort it out easy enough, I'll let you know when I upload it.

Ok, see how that goes, I jumped on and off a heap of tables and it kept ticking every time and never missed a post. I swear that sooner or later I am going to get reported as a malfunctioning bot on Party. I added the table highlighter to the registered version also.


Hey 1968, if you happen to read this, did you get my answers to the last couple of PM's you sent? Was just wondering about how the thing was going where the numberpad made the doink noise and wouldn't bet every so often- is that still happening?

And while I'm on the go, have you guys that tried the comma setting tried it again since I fixed it up and added the $ before the numbers?

Hey guys,

I was able to bring the raising from the blinds and if you post OOP into line with the rest of the raising pattern, so I'll put out the amended versions today. If you use the stable version it is patch 4, the beta is #11.


Website

The beta is on the left margin 'beta testing, stable version up the top, 'free trial'.

Hi, i played a session with the new patch 2 and everything worked :-) . But after five minutes it stopped working under like two minutes but after that it worked for 1,5h. I dont know what happened and it dont disturb me but i want you to know it. Thanks man you do a great job....

What stakes are you playing at Partypoker? (if you like to answer)

Hey, if you find any problems then don't hold back, I like to know and would rather it were working properly. I see you said Patch 2, there is actually a 3 and I might have addressed that problem in three, you must have got there before I swapped it . But there will be a four any time now so you might as well wait. The raising from the blinds worked out great; it does a 3.5 plus the limpers from all positions so no more adjusting, I'll put it up soon.

I haven't been playing much poker for the last couple of months as I've been doing the program in my spare time and when I do play Poker I'm usually doing the monkey in the spaceship thing testing new things so I keep the stakes low better for those unexpected all in's. I usually play 6max, FR and SNG's and try to move up as I go along. I've never played beyond 100nl or $16's but I've only ever made one deposit so it's a fun hobby for me.

Hi again. I played a long session for about 6 hours yesterday and I had a lot of problems again. Its the autorebuy to max checkbox and auto wait for big blind who didnt work. The other functions works. (i dont use many of them. mostly I use the hide popups etc). It can be gone for 1 hour and then if you have forget to manually check the checkbox on one table suddenly you hear a "pling" and the checkbox become checked by your programme. I also restart your programme sometimes and that worked but only for a few minutes.

ANother thing i noticed is that everytime i install a new patch the automovecursor became enabled. Even that it stand that it is disabled. I have to clear the position-numbers every time.

I hope you find the problem. Some help to you could be that I play on 8 tables and have 10 more open to datamine. I also use two screens.

Sorry for the delayed response, I wasn't here yesterday. This is unusual that it works one day and not the next, have you switched to Patch 4 before this happened or still have 2? I'm pretty sure I know what the problem is as when I changed it last time it improved so I just need to get it right, I'll be in touch.

Hi. I have switch to Patch 4 but there were problems with Patch 2 too i think.

Oh, hi

Purplecard,

I just put a new Beta on the site (beta 12). Chaliko who has previously had a lot of problems has been using it and his problems have been resolved with the basic operation. If you want to give that a quick run and it fixes everything then let me know and I'll add it all straight away....



So yeah, there is a new beta # 12 you can get it here WEBSITE


Hi corsakh,

I took a long look at iPoker the other day. What is it that you want there, I note that n9-monk has a bet pot, and Dave has it in his, so is it all the posting and window crushing that you are after? It's a tough gig, but I would really like to do it and Everest, I really would like to play there myself, there seems to be no lag and the games look pretty good. What is it that needs to be done in particular?

Okey, I will try beta 12 next session instead. Maybe I will use that until the registered version become stable without bugs if beta12 solves my problems.....

Same problems with Beta12 for me. I works five minutes and not works an hour. works again etc.........

Could it be my language? Could it be my firewall or antivirus?

But it worked fine a few weeks ago and i havent change any programs so i guess thats not the issue......

Well I thought it was the registration but there goes that idea. If it's anything like antivirus then I can't see why it would have worked in the past and not now but you can put it in your trusted software list if your antivirus has one. Do you remember what the last version number that was working fine before this started was? For one I could send you that to use in the meantime, and two I could see what changed. Did you use the beta's or the stable version- 2g perhaps...

Hey HighSteaks.

Is there some kind of walktrough somewhere?

Will this program allow me to play without use of the mouse? I will ofcourse still eneed to use mouse for opening tables

I put up Patch5 Purplecard, give that a try. There is very little different between those versions so it's likely that I found the culprit and it makes sense that it might effect some and not others so give that a try.




I'll also make the alteration to the beta so there will be beta 13 for if you are a beta user and have a problem with intermittent performance.