Hm I checked and it looks like everything is working. Sometimes it just displays calculated results without even waiting for you to hit calculate button.

That could be a little confusing I guess. But results you see are correct ICM calculation results. On your screenshot for example, everything is ok, and calculated.

If there is really a problem please send a screenshot which will highlight it. For example no results displayed, or something else.

yeah, thanks much for your responses Q. Thought icmizer>icm calculator would show nash-ranges for each player.

Everythink ok now. Thank you.

I see.

To get Nash ranges put hero on UTG position and hit Calculate Nash equilibrium button.

Full nash solution will be presented to you.

Yeah. That's what I was lokking for. Thank you.

hi

http://www.pokericmcalculator.com/icmizer/#rJyk

i remember that this calculation is wrong? bc 4way is not possible.
does the program exclude the bb here and just taking utg, button and hero for the calculation?
so hero pushes after utg push and bu flat, button flats 21% and calls 8%; and lets say bb overcalls 8%, but he folds here.

if i wanna make sure its correct i change sb and bb seat ^^.
but this does ignore the fact, that bb can wake up with a hand.

regards

What am I doing wrong? It«s not possible that I can only ship those hands

http://www.pokericmcalculator.com/icmizer/#xVXj

Also this one... Please someone give me some tips

http://www.pokericmcalculator.com/icmizer/#yYbr

fellatiado, Problem is with other stacks of MTT.

In first hand http://www.pokericmcalculator.com/icmizer/#xVXj there are 9 players at your table and chips sum is 209K. However in MTT control you set it up as if there are 27 players remaining and total chips sum is 433k.

Basically it means that your table for some reasons has not 1/3 of all tournament chips, but half. Also your 3rd table has very short stacks. This affects your calculation, and makes you really tight, because other players in MTT are so likely to bust soon, you can't take risks on your "big stack" table.

The same problem with second hand.

I have changed first spot to more realistic MTT situation, making sure that if there are 27 left total chips sum is 630K chips (3 x chips at your table).

In this case we can shove looser: http://www.pokericmcalculator.com/icmizer/#oDlP

Hey, basically ignoring 4 way only really affects spots where 4 way all-ins are really likely. For example, when there are already 3 all-ins in front of you, and there are some players behind.

In your spot spot igoring 4 way all-in would only mean that when icmizer is building actions tree and assigning probabilities to all its leafs, it will assign zero probability only to following leaf:

If you shove, AND bb calls, BTN will fold automatically. In reality however he may have some kind of range to call this triple all-in before him, for example KK+. However it happens on a very rare occasion, thats why here results are not really affected by limit of only 3-way spots.

From poker experience you should know how rarely 4 way all-ins happen.
Ignoring them doesn't affect calculations much.

Instead you should edit those 8% ranges in your spot, to get better results, assigning better range estimations to players at the table.

fellatido , if you are using MTT ICM calculator, please read the following article and watch the video inside it. It will give you a good understanding of this whole MTT icm calculator feature, which isn't too easy:
http://www.pokericmcalculator.com/en...cm-calculator/

I wonder what's the diffrence between Nash Equalibrium and "Calculate". When i click on "Calculate Nash Equalibrium" and then "Calculate" it shows different ranges for both. Also after clicking "Calculate Nash Equalibrium" it doesn't show result chart - which would be easier to check range.

Calculate provides precise calculation given current opponent ranges

Calculate Nash equilibrium finds nash equilibrium approximation given current stacks, bets, blinds and payout structure. Stable Nash solution rarely exists in poker. Thats why sometimes Nash approximation may include -EV hands in some ranges, or do not include some +EV hands, which a normal Calculation will quickly reveal.

Please refer to this video, which I recorded regarding this complex topic, I cover this question among other there: http://www.youtube.com/watch?v=CUgwXSU3LtM

hello!

Icimizer cant calculate how much i should open raise (min raise) given 3bets (allin or fold only) of players remainings no?

i mean i am in the boton , with XX cards, i put the hand in icimizer, choose a range of 3bet allin for SB and BB , and icimizer tell me if i can open this hand or not,


Are you working on this ?

thank you!

rhalala, hey. ICMIZER can be used to compare Hero Push and Fold decisions.

What you are asking is comparing hero Fold and Raise decisions. Thats not what I am currently working on.

is there a daily limit of hands i can run with ICMizer?

Hey I've answered this recently here, I'll just copy this answer:

Hi Q,

Regarding the 3betshove spot I posted before, you corrected the stacks giving a wider range wich is fine.
My question is, can it be wider? Because those calculations are based on 27 players left, wich is close to ft, but what if there were like 100 players still left? Could I be shoving even wider? In that spot I know I'd shove any suited Ace i.e. and maybe I'm making some very bad decisions.

Also will see the video regarding mtts, ty

I just bought the program but I have some problem with it:
- I can't login to the website. Every time I have to use the forgot password option and get a new password. After that I can login with the link in the e-mail but if I log out once the new password doesn't work at all.
- The downloaded version doesn't work.

Karcsibohoc, I've found a problem with your account and fixed it.
It should be all working fine for you now, both on site and in downloadable version.

Well of-course it can be wider, under some circumstances. If you arent as deep, and have a shorter stack you would be able to shove wider. If he opens a little wider, you also would be able to shove wider.

Also note that payoutstructure you are using , PS 180 with 27 paid is pretty special and not common (27 paid of 180 is 15% places paid, more standard is 10% or so).

If you use your actual MTT structure you may get wider shoving range.

Thanks, it seems fine now.

I have another question. I'm a Husng player and I would like to find the solution for the folowing situation:
Blinds 15/30
Hero 420
Villain 580
Hero raise to 60 with JhTh
Villain goes allin
We know that Villain goes all in with this range: 22+,A2+,KTs+ to make the calculation simple
How can I calculate the expected value of my hand against that range?

Hey.

Here is your spot: http://www.pokericmcalculator.com/icmizer/#rJym

Make sure to switch to Chip EV and hit Calculate again.

Note that you need to edit hero raise size here, by hitting amount of chips next to hero you open action editor control. Then you put BB all-in and assign his range.

Thanks for your reply. Great software, and great support!

hi. i saw my case about the new seated players was closed
so i thought it was fixed
i am sorry to inform you. but the problem still exists
now the players who got no cards are in the blinds LOL. and the REAL blinds are now utg and utg1 ...

+ imported its 8 players. in reality there are 9 . 1 player missing
u will see yourself

email sent with hh