Yes, they are.

This appear when running flopzilla:

No more hardware changes allowed.
Please contact support for a new key.
Your hardware ID is xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx.

For your convenience, the hardware ID has already been copied to the clipboard.
Just press Ctrl+V to paste into your mail.

To return to trial mode, delete the regkey.dat file in the main directory.
Or run RemoveRegistration.exe.

Ok, could you please mail support?

I have a problem with Flopzilla, when i select a preflop range it automatically calculates the hit %.

It wasnt like this before, i had to click on the flopzilla image to do it. I would like it to be like that again.

Any solution to this?

Flopzilla no longer requires manually pressing a button to calculate the stats.
This is done automatically whenever the range is changed by the user.
The old method where you had to press a button is no longer available.

I liked the old method more because it felt way more responsive when selecting ranges.

Right now if you are holding your mouse1 to select multiple hands or even selecting one by one you feel some kind of delay because its always calculating the % hit.

Wouldnt be possible to have the option to be like it was before?

PS: This is on a powerfull PC + SSD.

Ok, that's a bit odd.
There shouldn't be any delays in the responsiveness.
Could you please send me either a PM or e-mail?
I'll get back to you about this in about a week.

Other than that, please try setting an exception for Flopzilla.exe, Flopzilla_C.exe and Flopzilla_T.exe in both your virus scanner and your firewall. It's not entirely unlikely that they're interfering with the software.

I have to clarify that when i say "delay" im talking about milliseconds delay... But with the old method it was instant aka 0 miliseconds delay.

Probably just being nitpicky so if its not easy to revert to the old method dont worry about it because its really not a big problem.

PS: PM Sent.

Ok, I've received your PM.
I'll contact you in about a week.

works for mac?

Flopzilla is software for Windows, so no.

Is there a way to open multiple ranges in flopzilla? I'd like to be able to look at and edit a few of my preflop ranges without having to save and close one range and load another. So for instance, I'd like to look at my BB defense range and look at my BB 3b range at the same time. Is this possible?

Well, if you want to look at a range, then all you need to do is mouse over it.
The matrix will show whatever is in that range (you'll need to have "Clear mode" ON though). However, if you want to edit a range, then ... you need the matrix available to you to enter your desired range. There's just no other way around that. You can't possibly do this without the matrix, so if there's anything in there that you don't want to lose, then somehow, someway you'll need to save it. You can either do this by temporarily storing its contents with a predef range, ór you can create a savefile with "Save/Load->Export save file as forum/e-mail text block" ór just create a savefile with "Save/Load->Save". But in the end, you can't display multiple ranges within 1 matrix, given that there's only 1 matrix to display them in.


If all you want to do is compare ranges, then you could of course also open a second/third/etc instance of Flopzilla.

can you add overcards to middle pair filter?

You can just set custom filters for specific hands.
For that, right-click the stat and set individual filters as you see fit.

For more on Flopzilla's filter system, please watch the videos "Video 1: The basics" and "Video 2: The filter system" here: http://www.flopzilla.com/video.html

Is there an option to check backdoor fd % when calculating a range without selecting a flop? backdoor fd appears only when i select a flop.

No, although you cán do this with CardRunnersEV.

I've made a list for you:

Top 5%: 29% chance of bd flushdraw
Top 10%: 29% chance of bd flushdraw
Top 20%: 29% chance of bd flushdraw
Top 30%: 31% chance of bd flushdraw
Top 40%: 30% chance of bd flushdraw
Top 50%: 30% chance of bd flushdraw
Top 75%: 30% chance of bd flushdraw
All hands: 30% chance of bd flushdraw

And here's the stats for 2 card backdoor flushdraws:

Top 5%: 8% chance of bd flushdraw (2 crd)
Top 10%: 9% chance of bd flushdraw (2 crd)
Top 20%: 11% chance of bd flushdraw (2 crd)
Top 30%: 13% chance of bd flushdraw (2 crd)
Top 40%: 12% chance of bd flushdraw (2 crd)
Top 50%: 11% chance of bd flushdraw (2 crd)
Top 75%: 12% chance of bd flushdraw (2 crd)
All hands: 10% chance of bd flushdraw (2 crd)

As you can see, it's not exactly the most fascinating of all stats.
It's only at the top 5% and top 10% for 2 cards backdoor flushdraws that there's any remotely significant impact, and this is because the ratio of suited and paired/offsuit hands is significantly different (a pocket pair or offsuit hand can never become a backdoor flushdraw because both cards are of a different suit).

Basically there's 2 things that decide whether or not a hand is a 2 card backdoor flushdraw:
1) What is the chance of holding a suited hand?
2) What is the chance of a single card of that suit coming off on the flop?

The answer to number 2 is always the same, namely 41.6%, regardless of the hand. So the only real factor of significance is the chance of holding a suited hand. And that chance is also always about the same, regardless of the range.

Anyhow, no, Flopzilla does not show this stat for unknown flops.

Hi scylla,

http://shot.qip.ru/00oGf3-6WuKdMO8K/

Is it possible to remove all these filters with just a single click?

Yes, either press 'S' on your keyboard or go to "Commands->Select/deselect all statistics".

Also did you consider adding a convenient saving/loading system?

For example, here I'm considering the situation when I've opened the button and made a cbet on T97 board.
http://gyazo.com/ff131fa5eb78d62865cdeba03cf7f786
So I have a range here and a comlicated system of filters.

After facing a checkraise I need to build a different flop range for defending against it. But I still want to save my current state and sometimes switch back to it when I'm analyzing my defending frequency.

Do you think it would be more convenient if I am able to save/load such ranges+filters from left area here http://shot.qip.ru/00oGf3-5WuKdMO8M/ ?

Well, you could just create a savefile.
You can save with "Save/Load->Save as" or "Save/Load->Export savefile".

Another option would be to just open a second instance of Flopzilla.
That would entirely solve your issue as well.

Although I am confirmed logged in as administrator, and the box for "run as administrator" is checked in Zilla properties, the program always requires UAC permission to launch.

Any ideas on how to fix?

You can either turn off UAC or run Flopzilla_C.exe directly (instead of Flopzilla.exe). Please do note though that this may result in issues.

Thanks.

And if it's not too involved to explain, what is the underlying issue? Several other programs present this annoyance.

Hi,
My friend asked me how often JT suited hit a flop. We defined hitting as any pair (or better), any flush or flush draw, and any straight or straight draw.
we used a combinatorial approach, starting with pairs, adding flushes and flush draws, then added straights and straight draws, accounting for duplication. including gutshots, we lined up within rounding of your program (which is good, since we were using it as a double check)

pairs, us 32.43%, you 32.4%
adding flushes and draws, us 42.53%, you 42.5%
adding straights and draws, us 62.37%, you 62.4%

but then when we made the requirement open ended straight draws and no gutshots, we have a discrepancy. We have the same numbers as you right up until we add the OESD to the range.

we get 50.06% and you have 50.6% given that my approach was unchanged and I have checked it a few times, I was wondering if this was possibly an error of some kind (possibly display, duplication or something else?)

Thanks for your time