Open Side Menu Go to the Top
Register
Flopzilla Flopzilla

09-22-2020 , 11:30 PM
Scylla, thanks for your support, i bought in a European proxy =)
Flopzilla Quote
09-23-2020 , 12:45 AM
Quote:
Originally Posted by ikiiie
Scylla, thanks for your support, i bought in a European proxy =)
Ok, please let me know if you need further support.
I'll see if there's anything that can be done about the connection issues.
Flopzilla Quote
09-24-2020 , 01:48 PM
Is there any way to add an Ace High filter in Flopzilla Pro?

If I am not mistaken in previous versions an Ace High filter existed but I don't see any in the Pro version.
Flopzilla Quote
09-24-2020 , 06:43 PM
Hi scylla, is it possible to suggest adding another visualization for the pie chart? I found that visualizing the grouped filters in pie chart is useful but I think that stacked bar chart in addition to the pie chart will be great because if we could have that possibility and each hand in each rouped filter will be sort by equity we could see the bottom and top of each of our filtered ranges, heres is an example:



Hope it was clear and that you think it's useful as much as I think, Thanks.
Flopzilla Quote
09-24-2020 , 07:23 PM
Quote:
Originally Posted by DeuceOTR
Hi scylla, is it possible to suggest adding another visualization for the pie chart? I found that visualizing the grouped filters in pie chart is useful but I think that stacked bar chart in addition to the pie chart will be great because if we could have that possibility and each hand in each rouped filter will be sort by equity we could see the bottom and top of each of our filtered ranges, heres is an example:



Hope it was clear and that you think it's useful as much as I think, Thanks.
Piggybacking here to say that highlighting combos or hands in the grid when hovering on the pie chart would be awesome.
Flopzilla Quote
09-25-2020 , 12:14 AM
Quote:
Originally Posted by DeuceOTR
Hi scylla, is it possible to suggest adding another visualization for the pie chart? I found that visualizing the grouped filters in pie chart is useful but I think that stacked bar chart in addition to the pie chart will be great because if we could have that possibility and each hand in each rouped filter will be sort by equity we could see the bottom and top of each of our filtered ranges, heres is an example:



Hope it was clear and that you think it's useful as much as I think, Thanks.
Quote:
Originally Posted by abstractdude
Piggybacking here to say that highlighting combos or hands in the grid when hovering on the pie chart would be awesome.
Ok, I will take it under consideration.

Last edited by scylla; 09-25-2020 at 12:36 AM.
Flopzilla Quote
09-25-2020 , 12:15 AM
Quote:
Originally Posted by Koprek
Is there any way to add an Ace High filter in Flopzilla Pro?

If I am not mistaken in previous versions an Ace High filter existed but I don't see any in the Pro version.
Currently whether or not A high is displayed is situational, but I can consider making it optional.

Last edited by scylla; 09-25-2020 at 12:36 AM.
Flopzilla Quote
09-25-2020 , 07:04 PM
Filtering by equity buckets would be very helpful (combined with the pie chart would be even more).

Equity buckets are ranges of equities (for instance, 0 to 33%, 33 to 50%, 50 to 75% and 75% to 100%). A very helpful concept several good coaches use.
Flopzilla Quote
09-26-2020 , 01:54 AM
Quote:
Originally Posted by abstractdude
Filtering by equity buckets would be very helpful (combined with the pie chart would be even more).

Equity buckets are ranges of equities (for instance, 0 to 33%, 33 to 50%, 50 to 75% and 75% to 100%). A very helpful concept several good coaches use.
Ok, I will consider it for future releases. That being said, using equity buckets seems like a very labour-intensive approach to simulating real-life play. An alternative would be to use a GTO solver like GTO+, which can create realistic play for you at the push of a button. GTO+ can connect to FlopzillaPro, so you can simply export its strategies (for this press Ctrl+F).
Flopzilla Quote
09-27-2020 , 04:14 AM
Is there a file import of the GTO preflop ranges I can use with flopzilla pro?
Flopzilla Quote
09-27-2020 , 05:16 AM
Quote:
Originally Posted by GutPunch
Is there a file import of the GTO preflop ranges I can use with flopzilla pro?
Both GTO+ and FlopzillaPro store their ranges in /config/newdefs3.txt.
To transfer your ranges, simply copy this file.
Flopzilla Quote
10-03-2020 , 05:32 AM
Hi, scylla. How could I make preflop groups matrix looks like this https://prnt.sc/uscl2k with vertical splits?
Now splits are horizontal https://prnt.sc/uscrk5 and weight is shown by strip
Flopzilla Quote
10-04-2020 , 01:58 AM
Quote:
Originally Posted by ShapeOfMyHeart
Hi, scylla. How could I make preflop groups matrix looks like this https://prnt.sc/uscl2k with vertical splits?
Now splits are horizontal https://prnt.sc/uscrk5 and weight is shown by strip
Ok, we can consider customization here for future releases.
Flopzilla Quote
10-05-2020 , 12:41 PM
Why i switched back to normal Flopzilla:
1. No invert button
2. Bad contrast between selected and not selected suited


3. You need to click X button to close this window, it's very annoying that you cant click outside of window to close it

4. Weights was better: you cant adjust them afterwards
Flopzilla Quote
10-05-2020 , 01:46 PM
Quote:
Originally Posted by IamTomas
1. No invert button
2. Bad contrast between selected and not selected suited
3. You need to click X button to close this window, it's very annoying that you cant click outside of window to close it
4. Weights was better: you cant adjust them afterwards
Ok, thank you for the feedback. That being said, there actually is an invert button on the flop (upper right of the "Statistics" section). Other than that, I just thought I'd point out that you can also press Esc to leave the menu. As for the weights, I assume that you're referring to the weights in the preflop matrix? This choice allows for an unlimited amount of weights, whereas it was limited to five in Flopzilla v1. The reason for this approach is that it allows for GTO ranges. In the end, I suppose that it's somewhat subjective which approach is better.


Last edited by scylla; 10-05-2020 at 02:12 PM.
Flopzilla Quote
10-08-2020 , 02:58 PM
Scylla, just sent a key request for FlopZilla Pro. Using my Windows OS via VMWare Fusion gives the machine a different Hardware ID than when logging into the Bootcamp Partition directly.
Flopzilla Quote
10-08-2020 , 03:04 PM
Quote:
Originally Posted by cm1ck
Scylla, just sent a key request for FlopZilla Pro. Using my Windows OS via VMWare Fusion gives the machine a different Hardware ID than when logging into the Bootcamp Partition directly.
Ok, if you need any help, then please send an e-mail to support.
Flopzilla Quote
10-16-2020 , 02:54 PM
Hi! I can t manage to connect HoldEq with Flopzilla. It says go to HoldEq in Flopzilla menu to get the key but there is no HoldEq tab or anything in Flopzilla.

Thanks!
Flopzilla Quote
10-16-2020 , 05:59 PM
Hello.

I would like to reiterate my request for equity buckets. I think implementing it could be as simple as giving the use the ability to color equity ranges in the equity graph. Something like this.

In this example the chunck are 100 to 75% equity, 75% to 50%, 50% to 25% and 25% to 0 (amount of combos per chunk would be helpful too).

Last edited by abstractdude; 10-16-2020 at 06:13 PM.
Flopzilla Quote
10-17-2020 , 12:57 AM
Quote:
Originally Posted by abstractdude
Hello.

I would like to reiterate my request for equity buckets. I think implementing it could be as simple as giving the use the ability to color equity ranges in the equity graph. Something like this.

In this example the chunck are 100 to 75% equity, 75% to 50%, 50% to 25% and 25% to 0 (amount of combos per chunk would be helpful too).
Ok, I will consider it for future releases. However, please observe that if you want to look at strategies from an equity and hand strength perspective, that you may be better off by just taking an extra step and using GTO software. GTO software can simply calculate the optimal strategy for you, without needing to resort to all sorts of approximations and artificial workarounds.

Last edited by scylla; 10-17-2020 at 01:04 AM.
Flopzilla Quote
10-17-2020 , 01:00 AM
Quote:
Originally Posted by kboomthepot
Hi! I can t manage to connect HoldEq with Flopzilla. It says go to HoldEq in Flopzilla menu to get the key but there is no HoldEq tab or anything in Flopzilla.
Thanks!
FlopzillaPro no longer uses HoldEq, but instead offers a new method for multiway calcs:



If you still want to use HoldEq, then please install and activate Flopzilla v186:
www.flopzilla.com/download.html
Flopzilla Quote
10-17-2020 , 11:20 AM
Quote:
Originally Posted by scylla
Ok, I will consider it for future releases. However, please observe that if you want to look at strategies from an equity and hand strength perspective, that you may be better off by just taking an extra step and using GTO software. GTO software can simply calculate the optimal strategy for you, without needing to resort to all sorts of approximations and artificial workarounds.
Indeed. But if for instance y want to quickly grasp how a subset of flops impacts the equity of a given pair of ranges then this is very handy.
Flopzilla Quote
10-17-2020 , 02:58 PM
Quote:
Originally Posted by abstractdude
Indeed. But if for instance y want to quickly grasp how a subset of flops impacts the equity of a given pair of ranges then this is very handy.
Ok, I will consider it for future releases.
Flopzilla Quote
10-23-2020 , 09:06 AM
Hi Scylla - is there a way to create a custom filter for top pair, top kicker?
Flopzilla Quote
10-23-2020 , 02:47 PM
Quote:
Originally Posted by MrHS
Hi Scylla - is there a way to create a custom filter for top pair, top kicker?
You can create any custom combination of existing stats. A "top kicker" stat does however not yet exist, but I will consider adding it for future releases.

Last edited by scylla; 10-23-2020 at 03:04 PM.
Flopzilla Quote

      
m