Yes, for CREV those are stored in ./preflopranges.txt.
And for GTO+ it's ./config/preflopranges.txt.

It's the same format, so copying the CREV file to GTO+ should be sufficient to transfer the rankings.

hello is there any way to check more then first action in turn report? lets say OOP check IP check on flop and i do turn 2d and click turn report, so it will show me how OOP checking/betting turns but if i would like to see how IP betting when OOP check on turn how can i look in this?

If OOP has mulitple actions, then there will also be multiple spots where IP gets to act. So for example, if OOP either bets or checks then IP's actions would need to be displayed separately for each scenario by OOP. And each data point will have been measured for a different range and frequency for OOP. This means that this data for IP is essentially not suitable for being displayed in a table/graph. We can decide to ignore this, and plot it anyhow for later releases, but right at this moment it has been left out for this reason.

Out of curiosity. What that msg means exactly? Tree is way too big?

Yes, the tree is too big to fit into memory.
Assuming you're working with the 64bit version, the only way around this is to buy more RAM.
Or, if at all possible, stick to single bet sizes on the turn+river.
Your trees will be much smaller and solve faster, while not significantly affecting the quality of the solution.

When we r solving subset of flops and we choose Add x random flops for example 55 flops does that means that GTO+ will randomly choose them or it will choose standard weighted subset in it's database?Does we need to write asdf.txt in (Import flops from file,Export flops from file) columns like it is in the tutorial video?

It will choose them at random.
Standard weighted subsets are however also available.
For this, use the field next to "Import flops from file" and enter one of the following values:
15, 19, 23, 33, 37, 44, 55, 66, 80, 89, 111, 129, 141, 163.

Hey Scylla,

I know it has been suggested before, most likely by me, but this update really need to be in a future version.

The ability to copy/paste ranges at any decision point in a tree.

Take this example. I solve a BU vs BB scenario and now I'm looking at the flop's strategies for both IP and OOP. Now i lock a couple combos for both players with certains actions and move to the turn. I need to be able to copy those ranges now on turn and paste them in another solve I made. But it is impossible. The only way to do this would be to do it in Flopzilla first then copy these ranges from Flopzilla into GTO+ on a already made solution on turn.

I don't know if this is clear but if not feel free to ask me to elaborate more clearly.

As always, thanks.

Also it would be very powerful to have an option where we can save a "canvas" of action for a certain player. Exactly like the option in CREV where you can make the OOP facing a CB on flop for example, only calls with TP+. The ability to make, a player facing an action, do certain locked action with his range without the need to do them manually every time.

This would be such a nice feature.

Thanks for answering.

We can consider it, although I would recommend just leaving the turn and river unlocked and only focussing on the phase that you're interested in. The turn and river play is mostly there to estimate EVs for the hands in the followup scenarios. Defining play on an unknown board can be very tricky, and if at all possible, I personally consider it best to leave this up to the solver.

No, I understand.
I will see what I can do for future releases.

Hi,

Feature request in the database mode.

is it possible to generate, instead of random flops, random rivers?

I would like to see a tree of

Tc8c3s5sAh
Tc8c3sAc2c
Tc8c3s6c7c

9s8s3h5sAh
9s8s3hAc2c
9s8s3h6c7c

Qh9s6s5sAh
Qh9s6sAc2c
Qh9s6s6c7c


instead of...

Tc8c3s
9s8s3h
Qh9s6s

Obviously, the flop analysis will be the same in the "Aggregate" tab, but it will be possible to see further turn or river analysis. Actually, it's impossible to see turn aggregate value in this tab. I click on the "2 of heart" and nothing append!

Thanks scylla!

Ok, I will see what I can do for later releases.

Hi, I seem to be having difficulty downloading flopzilla. I click download and a small file downloads 30.1 MB file. I have no icon for flopzilla. I purchased the register key, and can't get to flopzilla to enter anything.
Please help!

I've just tried, and the download seems to work for me. It's possible that there was some temporary issue with the server, that has now been resolved. Other than that, can you please download the installer file to disc prior to running it? And set an exception in your virus scanner to the download location, given that it may be what's blocking the download. Other than that, the download page offers the option "Alternate download location". This server is at a different geographical location, so if for some reason you can't reach the main server, then the backup server may still work for you.

Thank you!

Hi,
I am solving a lot of IP vs BB spots where I want the BB player to always start with a check, but I wnat turn donks/probes enabled. Is there a way to force no flop donks in tree building? I always build the tree and delete the donk option in "Edit tree" but that is quite time consuming. Maybe something like 0 in the 1st bet box would mean dont use this action, while leaving it blank will use the default bet? This would also made it possible to create something like 0d,35p for no donkbets but 35% probe bets etc.

Another feature I would like is to save starting pot/stacks/rake in tree building profiles. I use profiles for single raised pots, 3bet pots etc, but always have to reset the stacks manually. Its painful when you load a 3bet profile but forget to reset the stacks and start solving with SRP stacks...

Please consider these and thanks a lot Scylla!

For this, select "Use custom settings for flop".
Click on the small triangle for more options.
Select "Don't donk".




It's already possible to distinguish between donk bets, probe bets and cbets. An example of such input would be "40p, 80d, 65c". This is only available for the custom settings on the turn and river though.




The purpose of a profile is that it only contains the betting strategies, but that the stacks and pot are not set. So unfortunately this would conflict with what you're looking for.

Hello,

I've a problem building trees. Let's say i've 3 available sizings on the river (25%, 50% and 85%) with potsize behind.

If I click with only 2 bets left, get the money in smoothly --> my sizings are replaced by 1 sizing of 100%.
If I click Add-Allin if push is less than 120% --> my sizings are 25%, 50%, 85% and 100%.
If I click Go-Allin if push is less than 120% --> my sizings are replaced by 1 sizing of 100%.

What I want is to mantain my sizings but eliminate the ones that make no sense. In this case I would like to replace the 85% by 100% and have (25%,50%,100%).

Is there a way to do that?

Thanks!

Why is the frequency displayed in the turn report different from the actual calculated value? (In this case on the 5c the turn report states a 36.35% frequency, but the later calculated value is 61.6%)

[IMG][/IMG]

Ok, can you send a savefile to support?

Thank you in advance,

Scylla

We don't have an option specifically for that. I can consider it for later releases, but right at this moment you would need to use the editor to remove the 85% action.

Hey Scylla! Great product.

I am trying to figure out a 3bet pot situation where my opponents do not play optimally.

In this instance - I raise OTB and SB 3bets me, I call.

The flop is 743

How do I force SB to continuation bet his whole range?

In this example: It only has SB cbetting 8.89% - how do I change that to 100%?

To edit a decision, click on "Lock+edit decision" in the lower right.
After that you can edit the decision as you see fit.

Alternatively, if you want to cbet 100% then you can also just use the editor to remove the "Check" action. Doing so will make your tree smaller and solve faster. For this, click on the "Edit" symbol, click on "IMPORT TREE". Then click on the relevant action and remove the "Check" action. After that, click on "ACCEPT CHANGES" to load your new tree.

Hi scylla, I've sent an email to support because GTO+ says my licence is not valid anymore. Could it be because I've requested too many keys?