After some research I found that HM2 does a full HUD refresh when moving the panels. NC caches everything so it's no problem most of the time. AJA produces quite a bit more data than other packs so it is not ok which is what you're seeing. The one operation that was being performed on the cached data (sorting) is going to be moved and hopefully there's no longer a problem starting from NC 2.5.1.11 (as yet unreleased)

You can increase the overhang.

HUD settings->Select HUD->General Settings->Overhang.

I would suggest you don't increase the overhang over 90 unless absolutely necessary.

Been using 100, it seems it didn't work at first but it does now, not sure why. Any reason for 90+ being bad foz?

100 should be OK but too big can cause all sorts of problems with HUD not updating/working properly and 90 or less seems to be the sweet spot. We usually see it more when people put obscenely high numbers like 5000 not realizing the value is pixels.

Hey! I'm likely to try this HUD in the next few days. But I have question regarding how adjustable it is. At the moment I have plenty of stats in my HUD that I basically always use every hand (such as RFI for every position, and both Fold SB v BT steal, Fold BB v BT steal, Fold BB vs SB steal, just to mention a few). Of course these will be found in some pop-up in your HUD, but I've become very used to having them displayed directly on the HUD, and don't want to have to use pop-ups to find them.

Can I chose which stats to display in the HUD freely as normally, yet still use all of its (seemingly awesome) features, such as the badges and pop-ups, etc? (I know that some of the stats you have normalized for bet sizes and various situations and I would of course like to use those still). I have no previous experience with notecaddy so I guess that's why I'm asking. Also, can I clone and adjust your pop-ups?

Thanks!

If you've built your own HM2 HUD you can do the same with our info. You'll need to learn our labeling system. You can add our of our info to your HUD and popups (replace stats, add range graphs and badges) or make adjustments to the included HUD.

I have someone that can do that for you, his info is included in your welcome email.

Here's an excerpt from the manual:

All stats are labeled STAT, for example 6MD-STAT. Only STAT definitions can be used for stats. Scroll down until you get to the STAT definitions.


The format: 6MD-STAT-street/spot-description


The definitions are grouped by street/spot and hopefully you find these fairly intuitive. The 3 letter identifiers are as follows; first letter is the street, second is the preflop action (C=caller, R=preflop raiser), third character further defines the spot (3=3Bet pot, S=single raise pot, M=multiway pot, H=heads up).



FRM is flop as the preflop raiser when the flop is multiway. The dropdown menu will contain all stats related to the description.



RRS is river as the preflop raiser in a single raise pot. Stats like triple barrel and delayed cbet+river bet will be found in this grouping.


In addition we have: FU=flop unopened, C4=post flop after calling 4Bet, R4=post flop after 4Bet'ing, R=river, PF=all preflop stats.

Sounds good! Thanks a lot.

It seems like the set max number of in the HUD dont work. Have changed it in config aswell but still I get a bigger number of hands then my max.
And this is not a super issue but I would like to go through my own HUD-stats in the HM2 replayer as a leakfinder but it refuses to do so with a larger number of hands (possible to much to handle for my comp even thou I have timelimit, 3 month, and that equals sub 100k hands)

When I think about it the timelimit for relevant hands in the HUD maybe dysfunctional too.

Any advise?

(Tried the stuff you emailed me about last time I tried getting this to work)

If I understand correctly, you're using the time/hand setting in HM2->HUD Settings->HUD Filters. That won't work with AJA stats.

What I would do instead is use NC->File->Filters.

Neither seems to affect the number of hands shown in the HUD for my opponents. Maxed out the number at 10k and restarted HM several times but stil shows an active opponent on a table with a sample size of 13k hands.

On heros HUD in the replayer no amount av hands to the right of the CC-stat is shown.

As for now this is not a problem for me on the tables but it could be in the future with a bigger database.
And i really really would like to check all the stats in the hud for hero during the last, say 10-30k hands, in the replayer.
For now some random handsample shows up in the sample but its not representativ of my play as a whole.

When you change the filter in NC you have to rerun notes to get that range.
The filter tells NC what range of hands to run, once hands are run that data is there until notes are reset.

When you bring up the HUD for any opponent or yourself we have internal sample sizes for each stat, badge and range graph. High frequency spots like fold BB vs Btn might only have the last few weeks of hands and low frequency spots like fold vs4B might have several months worth of hands. So the data you see in the HUD is as recent as sample size will allow.

Your issue seems to be that for your system there seems to be too much data for Hero and the HUD won't load so our individual sample sizes don't matter.

To check your own HUD you could just start a second database and import your last x months of hands and check your HUD in the replayer. The second db will in no way impact your main db or hurt performance.

Tyvm, will try it out!

Do you have any HUDs available for heads up?

Not at this point. Our HUD does work for HU as SHNL does include some HU play but there are no badges. You still get dynamic stats and range graphs. FOr badges I would need to rethink out system. Perhaps later this year, there are some improvements to the NL I want to do first and then finalize the PLO HUD.

I dunno why i7 is always reccomended, dont waste your money and buy i5 since niether HM2 or POSTGRESQL make use of hyperthreading so you will see no increase in performace between similarly clock i5 vs i7 as both are quad core.

NoteCaddy does make extensive use of hyperthreading. The hand processing and even retrieval can easily max out any amount of cores provided your disk isn't the bottleneck

Ah thats good to know then i didnt think to check notecaddy i just check HM2 and assumed it would be the same

Hi,

I havnt played poker in a couple of years, just before i stopped playing i purchased software called Notecaddy Advantage, which i cannot find any information about now. Is AJacksonAdvantage the same product renamed?

thanks

Luke

The software is brand new but NCA customers can switch over to the new software at the same stakes at no cost.

Email AJA@NoteCaddy.com with your previously used HM2 license and I'll set you up with the HUD. Please check the ad in the OP and let me know if you want the Dynamic or Premium HUD. Dynamic requires a better system due to it's intensive processor workload.

After I made notes reset everything's fine, but at new game session differences appear again.The more hands I have, the greater difference is.
In a game with a new player after 140 hands.....i see in aja hud 184 hands.
Something is still wrong........i must do "reset note" after every session.

Some new ideas to fix it...........?!?!?!?!?!?!?

Do you have note creation set to auto start (this is the default) when HM2 opens?

NC>Settings>Database Settings>Automatically start taking notes when HM2 opens.

This should be selected by default. Otherwise you have manually start note creation after each session.

After realizing that due to the amount of players in my zoom pool my PC is going to struggle to keep up. I've decided to add around 10 badges to my existing HUD. Can you guys recommend what badges you find most profitable?

Thanks for your time,

Net

No no no.....everything works ok durring the session besaides the number of hands(I see more hands in AJA Hud vs Default Hud 2.0).......but, if I do "reset note" after the session, number of hands becomes corect....vs all players(Ex:184 becomes 140).
That's the only problem: AJA Hud see more hands than Default Hud 2.0

Added the Skype support account. Had a few questions about the HUD.