Two Plus Two Publishing LLC
Two Plus Two Publishing LLC
 

Go Back   Two Plus Two Poker Forums > >

Notices

Commercial Software Discussion of commercial gambling-related / poker software & commercial graphics modifications

Reply
 
Thread Tools Display Modes
Old 05-17-2018, 01:11 AM   #2326
PaulyJames200x
veteran
 
Join Date: Aug 2014
Posts: 3,371
Re: 888/Party/StarsCaption

I have hotkeys set up for partycaption and 888caption. Thus say my hotkey of the letter d is 50% pot bet. I would press d and then it bet 50% pot automatically. How do i do it where pressing the hotkey such as d for 50% pot just set the bet size to 50%? Thus i would use another button like v for example to bet. Thus the reason i ask is because i want to press different buttons like 30 percent or 50 percent 80 percent bet size and like to see what is the actual number before i make the bet. I already have the hotkeys set on partycaption and 888caption.


I just have to uncheck autobet for every single of those hotkeys right?


The other thing is this. I use tableoptimizer for stars and have a layout where if you look at the monitor, its 24' and 1920x1200 resolution. Thus say i have 12 tables on stars. You would see 4 tables right in the middle of the screen without any overlap. And more tables behind each table etc. Thus anytime a table behind it has action, it automatically goes to that table.


I would like to make the same layout on partypoker and 888poker in the same exact spot where my stars tables are at. Thus if i open 4 tables of 888poker and click tile... the issue is all these tables are towards the left side of my monitor. Yes theres no overlap but its not right in the middle. Thus if i have stars and 888 tables showing there would be overlap. How do i do this layout where i can have say 5 tables on one quadrant of the monitor where i might have 3 stars tables and 2 888 table? But of course the other thing would be have only 888 tables on one quadrant of the screen right for this? Thus i want to mix stars, partypoker and 888. I guess i should keep partypoker tables on one quadrant, 888 on another and the other 2 quadrant all stars? But even if i don't, i want the tables for stars, party and 888 to be same size. Is there a way to do this?
PaulyJames200x is offline   Reply With Quote
Old 05-17-2018, 01:25 AM   #2327
PaulyJames200x
veteran
 
Join Date: Aug 2014
Posts: 3,371
Re: 888/Party/StarsCaption

Also i want to be able to move a table to any quadrant just by dragging it a bit and it goes to one of the quadrants. How do i do this? I have this set up on stars already with tableoptimizer. The other thing is i want to make it impossible to resize a table as i want all my tables the same size. Do i have to do this on the layout tab etc and if so how do i do this for both 888 and partypoker?


Thanks.
PaulyJames200x is offline   Reply With Quote
Old 05-17-2018, 02:17 AM   #2328
PaulyJames200x
veteran
 
Join Date: Aug 2014
Posts: 3,371
Re: 888/Party/StarsCaption

Okay this is what i did.


Opened 4 tables of stars tables. I use tableoptimizer with it and there is no overlap at all. I open 888poker. I open 4 tables of it. I manually make it around the same size as the stars tables on the 4 tables showing. I do this over every single stars table. When i do this, i click on table manager, and click on add opened on table slots. I did this again on active table slots. Thus it shows 1-4. Do i have to click add opened again to make it to 8 tables and then to 12 all the way up to 20?


I clicked active. I notice when i move tables from quadrant to quadrant, table doesn't get resized and automatically goes to right quadrant. But the issue here is why can't i get all the tables to one quadrant? For example if i have 6 tables showing. Say there is 2 tables on quadrant 1 and 2 tables on quadrant 2. I move both down to 3 and 4. There is no issue. But when i move the table on first quadrant down, it works but whe moving table from quadrant 2 down to 3 or 4, it doesn't? Thus imagine you want to put all the tables in one quadrant... it doesn't seem to allow me to do this? Seems like i have to have tables on 3 quadrants?


The other thing is when you play on stars, 888 and partypoker, do you recommend keeping all 888 tables on one quadrant, partypoker tables on another quadrant and stars on another? So say you have lot of stars tables compared to 888 and party. You use 2 quadrants for stars, 1 for 888 and 1 for partypoker? Do you recommend mixing tables in same quadrant? Like on bottom right quadrant, have 3 tables of stars and 1 table of 888? Or is this bad because when action comes to you on the table, it won't recognize it because 888caption, partycaption and tableoptimizer conflict? Or would a stars table or 888 table go over each other when action on them?


I tried to do this on partypoker the same thing with 888poker with the table manager layout. But its a bit different from 888poker with the table manager? I want to be able to play 3 sites where tables are all same size and i could move any table from quadrant to quadrant with no issue. And make sure when action is on a table, it goes to it.
PaulyJames200x is offline   Reply With Quote
Old 05-17-2018, 07:23 AM   #2329
LikeAA
veteran
 
LikeAA's Avatar
 
Join Date: Nov 2012
Location: Yellow submarine
Posts: 2,665
Re: 888/Party/StarsCaption

Hi, PaulyJames200x

1. You can configure betting hotkey for d with formula x0.5 and Auto bet disabled, and Bet/raise hotkey for v.
You can configure other hotkeys for other sizings.

2. About slots.
Quote:
The other thing is when you play on stars, 888 and partypoker, do you recommend keeping all 888 tables on one quadrant, partypoker tables on another quadrant and stars on another?
Yes
Table optimizer know nothing about PartyCaption and partypoker tables (and vice versa), so there is no way to prevent conflicts in such configuration.
The easiest way for you is create 3 stacks (one stack per room).
For 888 try to use this way:
a) create one slot in Table slots (in Active slots do not do anything).
b) turn on a “Stack” option for this slot
c) disable all table activation options in 888poker client settings (Game settings / When it’s my turn to play)
d) turn on Options / Popup table whenever action is required in 888Caption
For PartyCaption try to use a mode with miniatures. There is no way to prevent partypoker tables to pop up wrong, so there is no way to made a right working stack without it. Try to watch how ‘Stack 14’ config works (this is one of default configs in Table manager there). You can make miniatures very small if you don’t need them.
Also turn on Options / Popup table whenever action is required in PartyCaption.

First try to set it all separately for each of the rooms. If everything works correctly, you can try to run it all together.
LikeAA is offline   Reply With Quote
Old 05-17-2018, 08:35 AM   #2330
LittleGoliath
Pooh-Bah
 
LittleGoliath's Avatar
 
Join Date: Nov 2011
Posts: 3,921
Re: 888/Party/StarsCaption

Trying to setup partycaption, so far everything is good except the fact that the active player always 'dissapears' (their sn & stack)



Any idea how to fix this?
LittleGoliath is offline   Reply With Quote
Old 05-17-2018, 09:50 AM   #2331
LikeAA
veteran
 
LikeAA's Avatar
 
Join Date: Nov 2012
Location: Yellow submarine
Posts: 2,665
Re: 888/Party/StarsCaption

Hi, LittleGoliath
In this layout you have white font of player's nick and stack, so they are invisible on a white background.
You can change the font color (to something visible both on black and white - blue, for example) or try to disable Fonts / Nick / Change color (this way will work not for all layouts)

Also you can change a background of acitve player - try to replace c:\Programs\bwincom\bwincomPoker\Images\NewGameTab le\avatar_current_user.png file (you can get it from any other layout) or make a copy of avatar.png with this name, for example.
Or you can install any other layout with dark player pods.
LikeAA is offline   Reply With Quote
Old 05-17-2018, 11:05 AM   #2332
Nitti Vitti
journeyman
 
Join Date: Jul 2012
Posts: 340
Re: 888/Party/StarsCaption

is it possible to get a stat: call odds, if villian raises all in?

cheers
Nitti Vitti is offline   Reply With Quote
Old 05-17-2018, 11:08 AM   #2333
LittleGoliath
Pooh-Bah
 
LittleGoliath's Avatar
 
Join Date: Nov 2011
Posts: 3,921
Re: 888/Party/StarsCaption

Amazing, thanks for the quick assistance
LittleGoliath is offline   Reply With Quote
Old 05-17-2018, 11:53 AM   #2334
LikeAA
veteran
 
LikeAA's Avatar
 
Join Date: Nov 2012
Location: Yellow submarine
Posts: 2,665
Re: 888/Party/StarsCaption

Quote:
Originally Posted by Nitti Vitti View Post
is it possible to get a stat: call odds, if villian raises all in?

cheers
Can you describe in more detail what exactly do you need?

This should be displayed during your turn? (depending on the potential bet size entered in the bet box)
Or something else?
LikeAA is offline   Reply With Quote
Old 05-17-2018, 12:16 PM   #2335
straingdeblough
stranger
 
Join Date: Aug 2012
Posts: 2
Re: 888/Party/StarsCaption

im having problems woth party caption when im playing the party just frozen and i have to close the partycaption to come back the tables
straingdeblough is offline   Reply With Quote
Old 05-17-2018, 12:38 PM   #2336
LikeAA
veteran
 
LikeAA's Avatar
 
Join Date: Nov 2012
Location: Yellow submarine
Posts: 2,665
Re: 888/Party/StarsCaption

Quote:
Originally Posted by straingdeblough View Post
im having problems woth party caption when im playing the party just frozen and i have to close the partycaption to come back the tables
Hi
Try to check this:
1. Both PartyCaption and partypoker are run as admin.
2. Try to add both PartyCaption and partypoker to antivirus exclusion / trusted programs.
3. Try to enable Properties / Compatibility / Disable display scaling on high DPI settings both for PartyPoker and PartyCaption
LikeAA is offline   Reply With Quote
Old 05-17-2018, 03:49 PM   #2337
Nitti Vitti
journeyman
 
Join Date: Jul 2012
Posts: 340
Re: 888/Party/StarsCaption

Quote:
Originally Posted by LikeAA View Post
Can you describe in more detail what exactly do you need?

This should be displayed during your turn? (depending on the potential bet size entered in the bet box)
Or something else?
yes!

example:

Stack: 300
Pot: 100

If i type 100 in the betbox it should say:

Equity needed vs Ai Raise: 28.5% (200/700)

hope it makes sense
Nitti Vitti is offline   Reply With Quote
Old 05-17-2018, 10:21 PM   #2338
PaulyJames200x
veteran
 
Join Date: Aug 2014
Posts: 3,371
Re: 888/Party/StarsCaption

Quote:
Originally Posted by LikeAA View Post
Hi, PaulyJames200x

1. You can configure betting hotkey for d with formula x0.5 and Auto bet disabled, and Bet/raise hotkey for v.
You can configure other hotkeys for other sizings.

2. About slots.
Yes
Table optimizer know nothing about PartyCaption and partypoker tables (and vice versa), so there is no way to prevent conflicts in such configuration.
The easiest way for you is create 3 stacks (one stack per room).
For 888 try to use this way:
a) create one slot in Table slots (in Active slots do not do anything).
b) turn on a “Stack” option for this slot
c) disable all table activation options in 888poker client settings (Game settings / When it’s my turn to play)
d) turn on Options / Popup table whenever action is required in 888Caption
For PartyCaption try to use a mode with miniatures. There is no way to prevent partypoker tables to pop up wrong, so there is no way to made a right working stack without it. Try to watch how ‘Stack 14’ config works (this is one of default configs in Table manager there). You can make miniatures very small if you don’t need them.
Also turn on Options / Popup table whenever action is required in PartyCaption.

First try to set it all separately for each of the rooms. If everything works correctly, you can try to run it all together.

Hi there. With 888poker, did what i do previously fine or not? Because i tested this while playing a table of 888 while playing on stars etc. That table does seem to pop up. But the main issue here is when i open 6 tables for example, why does there have to be a minimum of 1 table on each quadrant? Thus why cant i move everything to just 1 quadrant.


Before i do what you suggest, is there a way to save my current layout that i have on 888poker? Thus i want to save this one and then do what you suggest? Because at the moment this layout seems to be on the 3x2 configuration.


So i just click add new? How do i create a single slot? Im confused with this. Do you mean open 1 table up at the right size i want? I did a new configuration. Opened a table. Then clicked the stack. But the moment i click on active, it moves all the way to top left monitor of screen and table size is lot smaller etc.


So what i did was open 4 tables. Then arranged it at the right spot. Thus no overlap and these tables are over the stars tables etc. Then i clicked add opened. So now there are the slots shown. Now i click active. There is nothing on active table slot. I then opened 6 tables. Here is the interesting thing though. Im actually able to get all 6 tables of 888poker to go on the bottom right quadrant. However, i can't do that to the other quadrants though. It seems like no matter what, there has to be at least 1 table on the top left quadrant and bottom right quadrant.


Thanks.

Last edited by PaulyJames200x; 05-17-2018 at 10:38 PM.
PaulyJames200x is offline   Reply With Quote
Old 05-18-2018, 02:18 AM   #2339
LikeAA
veteran
 
LikeAA's Avatar
 
Join Date: Nov 2012
Location: Yellow submarine
Posts: 2,665
Re: 888/Party/StarsCaption

Quote:
Originally Posted by Nitti Vitti View Post
yes!

example:

Stack: 300
Pot: 100

If i type 100 in the betbox it should say:

Equity needed vs Ai Raise: 28.5% (200/700)

hope it makes sense
Hi
There is no such tag in HUD now, but I think this value can be calculated from other tags (you can use formulas in HUD in braces {} )
Try to use this formula in HUD / Table panels:

{100*[stackAfterBet]/([potNextStreet]+2*[effStackNextStreet])}

I hope it will work as you want.
LikeAA is offline   Reply With Quote
Old 05-18-2018, 02:26 AM   #2340
LikeAA
veteran
 
LikeAA's Avatar
 
Join Date: Nov 2012
Location: Yellow submarine
Posts: 2,665
Re: 888/Party/StarsCaption

PaulyJames200x, it's hard for me to understand what you want.
You can show some screenshots of how you have tables arranged now and what result do you want to get?
LikeAA is offline   Reply With Quote
Old 05-18-2018, 03:24 PM   #2341
Nitti Vitti
journeyman
 
Join Date: Jul 2012
Posts: 340
Re: 888/Party/StarsCaption

Quote:
Originally Posted by LikeAA View Post
Hi
There is no such tag in HUD now, but I think this value can be calculated from other tags (you can use formulas in HUD in braces {} )
Try to use this formula in HUD / Table panels:

{100*[stackAfterBet]/([potNextStreet]+2*[effStackNextStreet])}

I hope it will work as you want.
seems to work, awesome!

thank you
Nitti Vitti is offline   Reply With Quote
Old 05-18-2018, 05:29 PM   #2342
Nitti Vitti
journeyman
 
Join Date: Jul 2012
Posts: 340
Re: 888/Party/StarsCaption

is it possible with effective stacks?
Nitti Vitti is offline   Reply With Quote
Old 05-18-2018, 06:47 PM   #2343
LikeAA
veteran
 
LikeAA's Avatar
 
Join Date: Nov 2012
Location: Yellow submarine
Posts: 2,665
Re: 888/Party/StarsCaption

Quote:
Originally Posted by Nitti Vitti View Post
is it possible with effective stacks?
Try to replace [stackAfterBet] to [effStackNextStreet] in the formula - it seems it should work as you want.
LikeAA is offline   Reply With Quote
Old 05-18-2018, 07:53 PM   #2344
PaulyJames200x
veteran
 
Join Date: Aug 2014
Posts: 3,371
Re: 888/Party/StarsCaption

Quote:
Originally Posted by LikeAA View Post
PaulyJames200x, it's hard for me to understand what you want.
You can show some screenshots of how you have tables arranged now and what result do you want to get?

Hi there where would i post screenshot?


Its basically like this. Imagine a 24' monitor with 1920x1200 resolution.


I want to have 4 tables showing at its regular/default size or close to it with no overlap. Now imagine i have 12 tables going. That would mean you see 4 tables... but behind each table, there should be 2 tables behind each one. Thus imagine i want to move my table from the top left quadrant to bottom left quadrant, i just drag it like that.



So imagine monitor and it look like this



Quadrant 1 Quadrant 2



Quadrant 3 Quadrant 4



And these tables are right in the middle of the screen. Thus the space from the left side of the table or right side of the table should be about the same to either the left side or right side of monitor.


The thing is the way i set it up, if i want all the tables on quadrant 4 from 888poker, i could do that. I drag all the tables to quadrant 4. But let say i want to drag them all to quadrant 1 or 2 or 3, for some reason it doesn't allow me to.
PaulyJames200x is offline   Reply With Quote
Old 05-19-2018, 02:09 AM   #2345
PaulyJames200x
veteran
 
Join Date: Aug 2014
Posts: 3,371
Re: 888/Party/StarsCaption

I also like to ask. I have the BB in bold where i use to keep it on the top table. But i want to know how do i get the BB showing up for every single player on 888 and partypoker? The way i have it, it shows stackbb. Do i check it for other players as well? Or do i have to do 2 lines?


Also do you recommend stackbb or startstackbb or startstackbb before blinds posting.
Im not sure what is the most popular one? So stackbb is what your bb throughout the hand? Like if you are on the turn or river, the bb stack changes? Because when i did stackbb, if i get in a pot, my bb changes and gets lowered as more chips get in. I assume most people do not do this right?
PaulyJames200x is offline   Reply With Quote
Old 05-19-2018, 03:52 AM   #2346
LikeAA
veteran
 
LikeAA's Avatar
 
Join Date: Nov 2012
Location: Yellow submarine
Posts: 2,665
Re: 888/Party/StarsCaption

Quote:
The thing is the way i set it up, if i want all the tables on quadrant 4 from 888poker, i could do that. I drag all the tables to quadrant 4. But let say i want to drag them all to quadrant 1 or 2 or 3, for some reason it doesn't allow me to.
If you want to play three rooms (Stars, Party and 888) simultaneously, then there is no way to create a such configuration. Tables of different rooms will pop up in an unpredictable way and you will not be able to avoid missclicks.

My suggestion is to make three different stacks (one stack for tables of each of the rooms) - for example, in Quadrants 1, 2 and 3. In this case, you will be able to configure the correct operation.


As for stacks in BB - I don't know what is the most popular. You can use one that is more convenient for you. There are different game strategies that involve the use of different information, so different people use different tags.
To see stacks in BB for all players - yes, you can just turn on 'for other players' option.
LikeAA is offline   Reply With Quote
Old 05-19-2018, 04:16 PM   #2347
PaulyJames200x
veteran
 
Join Date: Aug 2014
Posts: 3,371
Re: 888/Party/StarsCaption

Okay thanks. Another question i have. I recently added a few bet sizes to 888caption. Like such as imagine 80% pot, and a few other ones. I previously had few bet sizes up already. But the new ones i added, the font is in white. The other bet sizes i set up a while back is in grey. Is there a reason for this? How do i fix this? The other thing is, is there a way to move the new bet sizes i created up in the tabel panels? Like there are some in between it such as pot odds etc.
PaulyJames200x is offline   Reply With Quote
Old 05-20-2018, 05:59 AM   #2348
LikeAA
veteran
 
LikeAA's Avatar
 
Join Date: Nov 2012
Location: Yellow submarine
Posts: 2,665
Re: 888/Party/StarsCaption

Hi, PaulyJames200x

You can change a background color of HUD panel by clicking Background / Color button and font color by Font color button.

There is no way to move panels in the list, sorry.
LikeAA is offline   Reply With Quote
Old 05-20-2018, 12:17 PM   #2349
PaulyJames200x
veteran
 
Join Date: Aug 2014
Posts: 3,371
Re: 888/Party/StarsCaption

Thanks. Okay so i have the BB stack shown for me and all the players at the table. However, its arranged incorrectly. Such that its a few places off. How do i fix this?
PaulyJames200x is offline   Reply With Quote
Old 05-20-2018, 12:19 PM   #2350
PaulyJames200x
veteran
 
Join Date: Aug 2014
Posts: 3,371
Re: 888/Party/StarsCaption

Also on party i have bb shown for players as oppose to regular stack sizes. But when i get in a pot, it shows the pot size in real numbers. Is there a way to change the pot size to bb?
PaulyJames200x is offline   Reply With Quote

Reply
      

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Forum Jump


All times are GMT -4. The time now is 11:14 PM.


Powered by vBulletin®
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright © 2008-2020, Two Plus Two Interactive