Could u help me with adding content to regex list?

this Betsson Euro Tables. Entraction

Some examples:

El Palo (Texas Hold'em No Limit Eur 0.50/1) [Connection: Excellent]

Carlisle (Texas Hold'em No Limit Eur 1/2) [Connection: Good]

Beuda (Texas Hold'em No Limit Eur 2/4) [Connection: Excellent]

Carlisle (Texas Hold'em No Limit Eur 0.50/1) [Connection: Good]

Llers (Texas Hold'em No Limit Eur 2/4) [Connection: Poor]

Cortes (Texas Hold'em No Limit Eur 0.50/1) [Connection: Excellent]

El Palo (Texas Hold'em No Limit EUR 0.50/1) [Connection: Excellent]

i've changed eur to EUR, cos i haven't noticed that this was written with capital letters

After toudays update Pstars tables no longer get moved/resized, they are recognized but they don't move.

Jekus,
Entraction
Roger Mainfield,
I can not reproduce this. Did you uncheck Move and Size for the group? If the tables are still being recognized, that is the only thing that would have changed to produce the effect you describe.

Since todays update, Party Poker doesn't work anymore with placemint.

well never mind, now it seems to work for me.

Need help with merge regex. i currently play on rpm

Is there a way to have separate groups for FTP tables? For example, 1 group for 45 man's and 1 group for 90 mans... Is there a way to distinguish between the two? Thanks for any help or insight.

If the win titles are different then you can make different regexs for each.

That's not following the instructions.

Does this work with entraction? pointpoker?

If the regex list doesn't support it, post window titles and a regular expression can be made.

Here are two different table titles, any help for a separate regex would be great and appreciated.

$6 + $0.50 KO Sit & Go (185445795), Table 2 - 800/1600 Ante 200 - No Limit Hold'em - Logged In As xxxxxx

$5 + $0.50 Sit & Go (185456218), Table 4 - 50/100 - No Limit Hold'em - Logged In As xxxxxx

I would love to have a separate regex just for the KO's, so if anyone has a modified regex that incorporates them, it would be a huge help.

Thanks

The RPM window does not have much variety to it, hopefully it will work.

For Cash games:
RPM Poker - Tijuana (27877044)

Tournament:
RPM Poker - $2 Five Diamond Classic Satellite - Rebuys/Addons - Table 1
RPM Poker - $2000 Guaranteed Freezeout - Table 5

Is the lazy one, it might grab your lobby to but if you make a group with your lobby above your table group with the exact lobby title as regex you should be sweet.

Would this tool make it easy to set up 9 tables on Absolute poker instead of manual repositioning all the time? If so I would be willing to pay someone to help set it up over mikogo. I could transfer over AP or Full TIlt. THX

Hey guys!

Great program, I am having a bit of difficulty making it do what I want though.

I play MT SNGs on Pokerstars and I would like to separate different structures to different screens while playing tiled.

This would be easy since in 45 mans for example it would say "45 Players" in the window title. I set it to detect this in the custom regular expression box.

But when I set it to resize the tables to the smallest size possible "45 Players" dissapears and the program can no longer separate 45s from 180s for example.

I thought, yes ok fine I will play 12 tables on one screen and only 4 on the other so that it can still detect what structure it is, since with only 4 on the other screen the window title will have the structure in it.

So I set up a group to detect 180 mans and put them on my right screen, I set this group to be the first.

So what happens then is that it does detect these as 180 mans, puts them on the right screen but then the second group detects that table as also belonging to the second group which uses the Pokerstars SNG regular expressions so it takes them to the left screen instead and resizes them like I want it to do for non-180 mans.

So after being resized it no longer says "180 Players" and it is kept in the second group instead.

I have checked and when resized to the smallest size there is no difference
in the name of 45 or 180 player SNGs.


I thought a solution for this could be to set a group that detects what structure the table is when it pops up by setting a custom expression to "45 Players", it will then detect my 45s and resize the table and put them in on the left screen, and then another expression that only catches a minimized SNG to keep them there but does not catch the other group which will be 180 Players on the right screen.

So what I need is an expression that catches a minimized SNG to the smallest size, but not one that is not sized down, is this possible?

Or is there a simpler way?

A minimized 45 man 12$ turbo shows up like this for me:
$1... - Tournament

A minimized 45 man 27$ turbo:
$27 NL Hold'E... - Tournament

While a 12$ 180 man that is not sized down looks like this:
$12 NL Hold'Em [Turbo - 180 Players] - Tournament

I play different stakes, usually 12-38 in 45s. In 180s 12 or lower.

Would an expression that catches ... be good here since that seems to be what minimized tables have in common?

Also I am wondering why the custom expression I set in the group settings keeps dissappearing even after I save it?

For example I tick in the custom box and write "45 Players" in it, save and then when I check it out later the custom box is empty.
This keeps happening every time so it would be nice to also solve that.

Hope I didn't write too much I appreciate any help I can get.

I believe it's a bug of Placemint. I've met the same behavior.

Create two groups, g180 and gOther.
Check 'Custom' regexp and enter:

for g180: 180 Players
catch only 180 tourneys

for gOther: (\.\.\.)|(45)
catch both 45 tourneys and those who have "..." in the title (minimized)

Hope that helps.

How to fix unsaved 'Custom' regexp bug.
After setting up all that I've written above, close Placemint. Then manually open PlaceMint_WindowGroups.config with Notepad and edit it.
You will see two "<WindowGroup" tags there.
Look for "<title>Custom</title>" and create correct "<match></match>" tag instead of empty "<match/>".

Something like:

cbk1013,
Yes, PlaceMint can do that. It is not hard, so try following the setup instruction on the wiki and you might save yourself some money. If you still need help, you can pm me and we can set up a team viewer session.

Zuukii,
I understand the basics of what you are talking about, but I got a little lost near the end. Can you provide more examples of what you want?

poker.nsk.work,
Yes, there is a bug that forgets Custom expressions. The solution is to use the Edit Regex List window instead of using a Custom regex. In v3.0 Custom expression are completely removed and only the Edit Regex List window remains.

Wow, thanks for the help poker.nsk.work!

I appreciate the help, I tried it out and the same thing happened again, the first 180 group took the 180s to the right screen, but then the second group ment for 45s still took those for some reason.

I found a solution though which is so simple and obvious now .

I only use one group instead that takes the 180s to the right screen and use my regular setup for everything else.

Sorry, if I confused you. I was a bit confused myself in the end .

What I want is to separate different multitable SNGs to different screens (I use two) while playing tiled.

If you minimize these SNGs on Pokerstars to the smallest possible size (which I need to play many tables tiled) though there is no difference in the windownames between different structures.

I solved this by masstabling one structure and only playing a few of another so that I can still keep the tables large enough to be detected for the speficic structure that they are.

I guess I could try a combination of stacking and tiling to get in more tables and still separate the structures...

Thanks for the program, it's awesome .

hello everyone, I need some help setting this program up. I read the wiki and spent like 1.5 hours trying to figure this out but failed haha. All i play lots of SNGs 10-20 tables, and I would like to have them all stacked on one spot (point a). And just have a hot key to move the tables from point b) or point c) for tables that require extra attention. Then when it's finished, I could just press a hotkey and have it restacked in point a). Could someone please help me, or send them a template similar to this?

I tried looking around, but the forum is so big too, couldn't find anything.

thanks for your time

Make three slots. Position the first slot where you want your stack to be. Set the max window size to be how many windows you want to hold in the stack. Assign a hotkey. For the other two slots, do the same, but leave the max window count at 1.

This is working for me on Dollar and GBP tables but not the euros,any know a code edit to make the Euros work also???

thx

Nvm i got it working now,i never knew that keyboards had a Euro symbol key,once i found that out i just added the euro symbol next to the other currencys and it works fine.
Ctr+Alt+4 is shortcut for euro symbol on keyboard,was new to me.

Thanks a lot the Irishthug I just needed that extra little help hahaha, it turns out i didn't click on the option that allowed the swaps.

This program is AWESOME.. thanks again!