Okay, here's what I am running...
ver 0.21_rc2 (NOT the exe version)
Windows Vista
PokerStars
My config file (specifically the section "mucked" is "fu..ed"
Here's what is different. It "seems" as though this started a few weeks ago, just about the time Stars started some of the recent updates, not sure about that. This is ONLY the mucked display I am having the problem with...
I will have four tables open as usual. Importing working fine. I run the tables like this...
A B
C D
Trying to fill the screen as much as possible (22" screen). From an backup file I enter the locations of the where the mucked cards should show on a 10 seat table....here's what I enter in that section
<layout height="546" max="10" width="792">
<location seat="1" x="576" y="166"> </location>
<location seat="2" x="722" y="201"> </location>
<location seat="3" x="736" y="317"> </location>
<location seat="4" x="672" y="420"> </location>
<location seat="5" x="484" y="420"> </location>
<location seat="6" x="389" y="476"> </location>
<location seat="7" x="223" y="461"> </location>
<location seat="8" x="165" y="339"> </location>
<location seat="9" x="208" y="201"> </location>
<location seat="10" x="318" y="176"> </location>
<location common="1" x="392" y="271"> </location>
</layout>
The table in the "A" position above (top left on the screen) will look perfect when the "mucked" cards pops up. Every card right where it belongs for my viewing. Tables B C and D will be ALL over the screen. I've even changed the config file and temporarily made the time it shows to 20 seconds so I could move them into position and save them. It then drives my config file nuts and shows unbelievable positions ... as shown below before I moved hardly anything. Some are minuses, some in the 57666 position
<layout height="546" max="10" width="792">
<location seat="1" x="-2897" y="29000"> </location>
<location seat="2" x="722" y="0"> </location>
<location seat="3" x="-3626" y="57666"> </location>
<location seat="4" x="129" y="18000"> </location>
<location seat="5" x="483" y="333"> </location>
<location seat="6" x="400" y="333"> </location>
<location seat="7" x="225" y="333"> </location>
<location seat="8" x="-768" y="57333"> </location>
<location seat="9" x="212" y="0"> </location>
<location seat="10" x="322" y="0"> </location>
<location common="1" x="-1717" y="52000"> </location>
That's the FIRST problem....
Next problem, possibly related. When the HUD was working properly, if I changed one of the HUD positions on one table, then saved it, it changed all the tables. All I had to do was to slightly move a table and it would snap the hud on that table to the correct positions I had just saved... not any more. Each hud on each table seems to work independently of the other ones, which drives the config file nuts. AND, I have to manually close each table's hud when I leave a table, on the blank screen left after closing, all the hud stats remain until I "kill this hud". I used to just close the table and hud disappears... NOT now.
Maybe I'm wasting my time and I've missed something that shows this problem has already been addressed. Sorry for the long post, just trying to give you the exact details..
Dog