Open Side Menu Go to the Top
Register
StackAndTile StackAndTile

06-20-2017 , 09:46 PM
Quote:
Originally Posted by Elmagico19A1
Hi there,

My Stack and Tile for 888 poker isn't working as it should. Had nog problems with it until 2/3 weeks ago. After a while 1 or more tables randomly freeze. Even when I quit Stack and Tile they are not responding to my actions. When I close Stack and Tile and restart 888 it mostly works again. Quite annoying, hope you have a solution.

Thanks in advange.

Cheers

Are you using a small grid slot size? Does the site show up as "888Poker_Small" in the Included Sites listbox?

Can you try downloading this version v2.94n and see if it fixes it?

http://www.stackandtile.com/sat/tmp/...Setup-294n.exe
StackAndTile Quote
06-21-2017 , 09:20 AM
Quote:
Originally Posted by greg nice
Are you using a small grid slot size? Does the site show up as "888Poker_Small" in the Included Sites listbox?

Can you try downloading this version v2.94n and see if it fixes it?

http://www.stackandtile.com/sat/tmp/...Setup-294n.exe
Yes it does. Going to try the download and see if it helps.
StackAndTile Quote
06-21-2017 , 12:41 PM
Remember to Remove and re-Include the site
StackAndTile Quote
06-21-2017 , 07:42 PM
Quote:
Originally Posted by greg nice
Remember to Remove and re-Include the site
Ah, forgot that. Wanted to comment here that the problem did still occur. But didn't re include the site. Will try that.

New problem on Party Poker is, with the updated Stack and Tile, when someone in front of me is all in, my table won't pop up. Did have this problem before but it didn't occur since the last updates. It's back now.

Any solutions for that?
Will try 888 tomorrow during my session.

Thanks!
StackAndTile Quote
06-22-2017 , 12:59 AM
Quote:
Originally Posted by Elmagico19A1
Ah, forgot that. Wanted to comment here that the problem did still occur. But didn't re include the site. Will try that.

New problem on Party Poker is, with the updated Stack and Tile, when someone in front of me is all in, my table won't pop up. Did have this problem before but it didn't occur since the last updates. It's back now.

Any solutions for that?
Will try 888 tomorrow during my session.

Thanks!
Can you try Removing and re-Including PartyPokerModern as well? I made a few changes to that in this new version also
StackAndTile Quote
06-22-2017 , 08:46 AM
Quote:
Originally Posted by greg nice
Can you try Removing and re-Including PartyPokerModern as well? I made a few changes to that in this new version also
Will re include both sites now and going to try again, thanks for the quick help.
StackAndTile Quote
06-22-2017 , 07:56 PM
888 poker still doesn't work. Same goes for Party, altho Party works with the normal 2.94 version.
StackAndTile Quote
06-22-2017 , 09:33 PM
Quote:
Originally Posted by Elmagico19A1
888 poker still doesn't work. Same goes for Party, altho Party works with the normal 2.94 version.
Can you tell me exactly what doesn't work? What is the problem? What happens? What is supposed to happen? With as much detail as possible
StackAndTile Quote
06-25-2017 , 04:09 AM
I'm having an issue with betonline while simultaneously running acr and ignition (both of which Stack and Tile works excellently for).

When I tick the fold box in mtt's, somehow shortly after I move my mouse away from the window the "raise any" box is ticked instead. The "raise any" box is also occasionally ticked of its own accord without me even moving my mouse over the window. I have a few advanced options enabled like "Activate table under mouse" but nothing too beyond normal configuration settings. The only action hotkeys I use are bet x bb, all-in, and fold.

I've tinkered with changing settings around but am still unsure of the issue, any ideas as to what the cause could be? Thank you.
StackAndTile Quote
06-25-2017 , 09:39 AM
Quote:
Originally Posted by dripdrop
I'm having an issue with betonline while simultaneously running acr and ignition (both of which Stack and Tile works excellently for).

When I tick the fold box in mtt's, somehow shortly after I move my mouse away from the window the "raise any" box is ticked instead. The "raise any" box is also occasionally ticked of its own accord without me even moving my mouse over the window. I have a few advanced options enabled like "Activate table under mouse" but nothing too beyond normal configuration settings. The only action hotkeys I use are bet x bb, all-in, and fold.

I've tinkered with changing settings around but am still unsure of the issue, any ideas as to what the cause could be? Thank you.
Hrmmm SaT shouldn't be sending any other clicks to the table. Does it happen when you use your Fold hotkey? Or only when you use your mouse?

Can you try turning off the Advanced Options for "Focus Betbox when possible", and also "Click PokerStars Info tab" and see if either of those solves it?
StackAndTile Quote
06-25-2017 , 11:40 AM
Quote:
Originally Posted by greg nice
Can you tell me exactly what doesn't work? What is the problem? What happens? What is supposed to happen? With as much detail as possible
On 888 after a while some of my tables randomly freeze and I can't do any action anymore. Not even when I close Stack and Tile.

On Party Poker ( with the newest version of Stack and Tile ) When someone is all in in front of me, the table won't pop up.

Hope this is enough information as I don't know how I can give any more information.
StackAndTile Quote
06-25-2017 , 11:55 AM
Quote:
Originally Posted by Elmagico19A1
On 888 after a while some of my tables randomly freeze and I can't do any action anymore. Not even when I close Stack and Tile.
Sometimes on 888, this happens when there is a popup from the client that needs to be handled. 888 requires you to act on the popup before you can take any other actions on the table. Does this only happen on tournament tables? Or cash? Are you certain there is no popups? There is an Advanced Option in SaT to "Move 888 popups to grid" to help this problem

Quote:
Originally Posted by Elmagico19A1
On Party Poker ( with the newest version of Stack and Tile ) When someone is all in in front of me, the table won't pop up.
Are you using any special table graphics mods or anything like that? Can you click File->Current Layout, and paste me everything?
StackAndTile Quote
06-26-2017 , 12:05 AM
Quote:
Originally Posted by greg nice
Hrmmm SaT shouldn't be sending any other clicks to the table. Does it happen when you use your Fold hotkey? Or only when you use your mouse?

Can you try turning off the Advanced Options for "Focus Betbox when possible", and also "Click PokerStars Info tab" and see if either of those solves it?
It seems to be happening only when I use my mouse, I stopped using the fold hotkey for a while and that didn't make a difference.

I played a quick tester session in which I tried turning off "Focus Betbox when possible" and it seems like that may have been the issue. Is it possible to disable that option just for chico and still use it for ignition/acr, or can you disable all functions of the program for one site other than table positioning? I'd like to not have to stop using "focus betbox" altogether as I only play a few tables of betonline relative to other site and it's one of my favorite aspects of the program.

One other note- I tried removing and re-adding my chico site configuration and saw that I got an error message that I may have just clicked through before: "Something went wrong: call button color for Chico is detected as Black. This usually indicates a problem" (same message for bet and raise). I had the table background set to black but got the same message after switching to blue and re-adding. The message suggested that I may need to change my scan mode. I assume I don't want to do that as it's already set to the proper configuration for acr and ignition?
StackAndTile Quote
06-26-2017 , 01:34 AM
Quote:
Originally Posted by dripdrop
It seems to be happening only when I use my mouse, I stopped using the fold hotkey for a while and that didn't make a difference.

I played a quick tester session in which I tried turning off "Focus Betbox when possible" and it seems like that may have been the issue. Is it possible to disable that option just for chico and still use it for ignition/acr, or can you disable all functions of the program for one site other than table positioning? I'd like to not have to stop using "focus betbox" altogether as I only play a few tables of betonline relative to other site and it's one of my favorite aspects of the program.
No, its not possible to selectively turn that off just for one site. But perhaps there is a problem with that feature for Chico. Are you using the built-in Chico site profile within SaT? I believe I originally tested it using TigerGaming and maybe betOnline is different. I'll have to look. Can you check and see if the same problem happens with cash games too?

Quote:
Originally Posted by dripdrop
One other note- I tried removing and re-adding my chico site configuration and saw that I got an error message that I may have just clicked through before: "Something went wrong: call button color for Chico is detected as Black. This usually indicates a problem" (same message for bet and raise). I had the table background set to black but got the same message after switching to blue and re-adding. The message suggested that I may need to change my scan mode. I assume I don't want to do that as it's already set to the proper configuration for acr and ignition?
Are the buttons truly black? As I remember, the buttons were truly black for TigerGaming. If the buttons are black, then you can ignore the message. Do you have the proper graphics options selected for Chico? :
http://www.stackandtile.com/sat/help/chico
StackAndTile Quote
06-26-2017 , 09:59 AM
Quote:
Originally Posted by greg nice
Sometimes on 888, this happens when there is a popup from the client that needs to be handled. 888 requires you to act on the popup before you can take any other actions on the table. Does this only happen on tournament tables? Or cash? Are you certain there is no popups? There is an Advanced Option in SaT to "Move 888 popups to grid" to help this problem

I only play tournaments so I don't know if it happens to cash tables as well. The move 888poker popups to grid box is already ticked.

Are you using any special table graphics mods or anything like that? Can you click File->Current Layout, and paste me everything?

I'm not using special table graphics. Here is the list from file -> current layout.

[settings]
table_width=639
table_height=468
total_slots=13
slot1x=0
slot1y=0
slot2x=639
slot2y=0
slot3x=1278
slot3y=0
slot4x=1917
slot4y=0
slot5x=0
slot5y=468
slot6x=639
slot6y=468
slot7x=1278
slot7y=468
slot8x=1917
slot8y=468
slot9x=0
slot9y=936
slot10x=639
slot10y=936
slot11x=1278
slot11y=936
slot12x=1917
slot12y=936
stack_slot=13
newtables_slot=grid
move_to_grid=preflop
oldtables_duration=5
oldtables_slot=grid
scan_mode=DWM
slot13x=1726
slot13y=1435
play_mode=SaT
activate_most_urgent=1
activate_table_under_mouse=0
highlight_active_win=0
move_mouse_to_most_urgent=0
move_mouse_if_not_over_table=0
left_click_detection=1
stack_when_clicking_call_or_bet=0
stack_table_at_end_of_hand=0
drag_drop_swap_slots=1
drag_drop_mode=Logical
minimize_to_tray=0
show_table_count_while_running=1
show_session_timer=0
move_888_popups=1
close_bovada_popups=1
stars_include_logged_in_as=0
notify_new_tables=1
notify_old_tables=1
notify_keep_in_grid=1
notify_ignore_table=1
notify_move_to_grid=0
notify_end_of_hand=0
notification_duration=3
hotkeys_fire_on_release=0
allow_action_hotkeys_on_ignored_tables=1
click_bet_for_allin_hotkey=0
click_bet_for_betsize_hotkeys=0
click_bet_for_betxbb_hotkeys=0
also_keep_in_grid_when_move_to_slot_x=0
fold_checkbox_setting=Fold
also_stack_table_for_betsizeX=0
focus_betbox=0
detect_hidden_windows=0
auto_accept_stars_waitlists=0
click_stars_info_tab=0
table_count_gui_x=2456
table_count_gui_y=1453
[general]
show_walkthru=0
gui_x=1230
gui_y=651
last_tab=
filename=Laptop12tabs.ini
is_reloading=0
version=2.94
win_ver=10.0.14393
v292_msg=0
v=fu
[sites]
number_of_sites=4
included_sites=PokerStarsMercury,Winamax,PartyPoke rModern,888Poker_Small
PokerStarsMercury_included_executable_path=C:\Prog ram Files (x86)\PokerStars.EU\PokerStars.exe
PokerStarsMercury_included_resized_table_width=639
PokerStarsMercury_included_resized_table_height=46 8
PokerStarsMercury_included_fold_color=0x244
PokerStarsMercury_included_call_color=0x241
PokerStarsMercury_included_bet_color=0x240
Winamax_included_executable_path=C:\Users\Gebruike r\Winamax\Winamax Poker\Winamax Poker.exe
Winamax_included_resized_table_width=639
Winamax_included_resized_table_height=507
Winamax_included_fold_color=0x90669
Winamax_included_call_color=0x90669
Winamax_included_bet_color=0x9aa3a8
888PgHmClassicQT_included_executable_path=C:\Progr am Files (x86)\PacificPoker\bin\poker.exe
888PgHmClassicQT_included_resized_table_width=639
888PgHmClassicQT_included_resized_table_height=468
888PgHmClassicQT_included_fold_color=0x585858
888PgHmClassicQT_included_call_color=0x3386e
888PgHmClassicQT_included_bet_color=0x373958
888PacificPokerQT_included_executable_path=C:\Prog ram Files (x86)\PacificPoker\bin\poker.exe
888PacificPokerQT_included_resized_table_width=639
888PacificPokerQT_included_resized_table_height=46 8
888PacificPokerQT_included_fold_color=0x0
888PacificPokerQT_included_call_color=0x303158
888PacificPokerQT_included_bet_color=0x373958
PartyPokerModern_included_executable_path=C:\Progr ams\PartyGaming\PartyGaming.exe
PartyPokerModern_included_resized_table_width=639
PartyPokerModern_included_resized_table_height=457
PartyPokerModern_included_fold_color=0x353535
PartyPokerModern_included_call_color=0x353535
PartyPokerModern_included_bet_color=0xd3d3d3
888Poker_Small_included_executable_path=C:\Program Files (x86)\PacificPoker\bin\poker.exe
888Poker_Small_included_resized_table_width=639
888Poker_Small_included_resized_table_height=468
888Poker_Small_included_fold_color=0x0
888Poker_Small_included_call_color=0x0
888Poker_Small_included_bet_color=0xff
[hotkeys]
number_of_hotkeys=6
hotkey1action=Fold + Stack table
hotkey1key=F12
hotkey2action=Call
hotkey2key=F11
hotkey3action=Keep table in grid
hotkey3key=F1
hotkey4action=Bet
hotkey4key=F4
hotkey5action=Move table to Next slot
hotkey5key=F5
hotkey6action=Ignore table
hotkey6key=F3
send_table_under_mouse=1

Maybe it's an idea to remove everything and make a new layout?
StackAndTile Quote
06-26-2017 , 10:28 AM
Quote:
Originally Posted by Elmagico19A1
I'm not using special table graphics. Here is the list from file -> current layout.

[settings]
table_width=639
table_height=468...

Maybe it's an idea to remove everything and make a new layout?
No need to try a new layout yet. But that config file is still showing version 2.94 which means it doesn't look like you're using the new test version. Unless you rolled back?

Can you please try this version 2.94p

http://www.stackandtile.com/sat/tmp/...Setup-294p.exe

Check that the version is installed by looking on the About tab. Then Remove and re-Include "PartyPokerModern" and test it against all-in situations again.

And as for the 888 problem, next time you notice it, please check to see if there are any popups for the table that is not responding and let me know
StackAndTile Quote
06-26-2017 , 10:55 AM
Quote:
Originally Posted by greg nice
No need to try a new layout yet. But that config file is still showing version 2.94 which means it doesn't look like you're using the new test version. Unless you rolled back?

Can you please try this version 2.94p

http://www.stackandtile.com/sat/tmp/...Setup-294p.exe

Check that the version is installed by looking on the About tab. Then Remove and re-Include "PartyPokerModern" and test it against all-in situations again.

And as for the 888 problem, next time you notice it, please check to see if there are any popups for the table that is not responding and let me know
I changed the version to the old one because there I don't have any problems with Party. Both versions I have the 888 problem.

I will check 888 on pop ups, as for now I believe the tables just randomly freeze once every hour/ hour and a half.
StackAndTile Quote
06-27-2017 , 12:06 AM
Quote:
Originally Posted by greg nice
No, its not possible to selectively turn that off just for one site. But perhaps there is a problem with that feature for Chico. Are you using the built-in Chico site profile within SaT? I believe I originally tested it using TigerGaming and maybe betOnline is different. I'll have to look. Can you check and see if the same problem happens with cash games too?
I was actually wrong, the issue isn't with "focus betbox". I had the same problem of "raise any" being checked with the focus betbox option off during my session today until I removed the site configuration.

When I tested it yesterday I may have not have been able to reproduce the issue because I was testing with only one $.30 sng rather than multitabling. Idk if this helps but the checked box seems to switch mainly when I move my mouse from hovering over one table back to the table in question. Also I am using the built in Chico site profile, I didn't realize you can add custom configurations but I'll give that a try.

I'm still finishing up my session for the day but when I'm done I'll try pm cash as well and see if I get the same issue.

Quote:
Originally Posted by greg nice
Are the buttons truly black? As I remember, the buttons were truly black for TigerGaming. If the buttons are black, then you can ignore the message. Do you have the proper graphics options selected for Chico? :
http://www.stackandtile.com/sat/help/chico
The buttons are light gray with black text, at least in my client. And ya I have the proper graphics options selected.

Last edited by dripdrop; 06-27-2017 at 12:16 AM.
StackAndTile Quote
06-27-2017 , 12:31 AM
Quote:
Originally Posted by dripdrop
I was actually wrong, the issue isn't with "focus betbox". I had the same problem of "raise any" being checked with the focus betbox option off during my session today until I removed the site configuration.

When I tested it yesterday I may have not have been able to reproduce the issue because I was testing with only one $.30 sng rather than multitabling. Idk if this helps but the checked box seems to switch mainly when I move my mouse from hovering over one table back to the table in question. Also I am using the built in Chico site profile, I didn't realize you can add custom configurations but I'll give that a try.

I'm still finishing up my session for the day but when I'm done I'll try pm cash as well and see if I get the same issue.



The buttons are light gray with black text, at least in my client. And ya I have the proper graphics options selected.
If the buttons are light gray, then you shouldn't be getting the error. What version of Windows are you on? And how many monitors?
StackAndTile Quote
06-27-2017 , 01:51 AM
Quote:
Originally Posted by greg nice
If the buttons are light gray, then you shouldn't be getting the error. What version of Windows are you on? And how many monitors?
Windows 7, and 3 monitors (30" dell flanked by 1600x1200 + 1920x1200, both in portrait). Here's a sample table:



Edit: creating a custom site configuration seems like it might have worked, I haven't had an error so far both testing cash and sng

Last edited by dripdrop; 06-27-2017 at 02:21 AM. Reason: testing update
StackAndTile Quote
06-27-2017 , 07:22 AM
Quote:
Originally Posted by dripdrop
Windows 7, and 3 monitors (30" dell flanked by 1600x1200 + 1920x1200, both in portrait). Here's a sample table:

http://i65.tinypic.com/2czxzqr.jpg

Edit: creating a custom site configuration seems like it might have worked, I haven't had an error so far both testing cash and sng
Custom config shouldn't change the "buttons detected as black" error. So that's strange. But the custom config won't have the betbox coords, which means that the "Focus betbox" option would never work. I'm guessing the betbox is near the same location as that "Raise any" checkbox, that's why I suggested playing with that option. Custom sites won't have all of the features available, and I usually don't recommend people use it..
StackAndTile Quote
06-29-2017 , 12:48 PM
Where can I change ignored table x/y coordinates?
StackAndTile Quote
06-29-2017 , 09:08 PM
Quote:
Originally Posted by obviousTROLL
Where can I change ignored table x/y coordinates?
See this page:

http://www.stackandtile.com/sat/help...vanced-options
StackAndTile Quote
07-05-2017 , 07:33 PM
888 still not working with Stack and Tile. It's super strange because I never had any problems with it. Tried everything but I can't seem to get it working. I now just skip 888 because it's super annoying that my tables freeze randomly. Maybe we can look together for a solution or something? U do something like real time help? trough skyper or something?
StackAndTile Quote
07-05-2017 , 08:16 PM
Quote:
Originally Posted by Elmagico19A1
888 still not working with Stack and Tile. It's super strange because I never had any problems with it. Tried everything but I can't seem to get it working. I now just skip 888 because it's super annoying that my tables freeze randomly. Maybe we can look together for a solution or something? U do something like real time help? trough skyper or something?
Yes I can help over skype, but its gonna be a waste of time unless we know exactly how to reproduce the problem. Do you know how to reproduce it? Or does it just happen randomly? I haven't been able to trigger it on my machine. We are talking about the tables just dropping out, right?
StackAndTile Quote

      
m