No unfortunately it doesn't. I never thought that this was part of the goal of SaT, but rather something left for the likes of ninja.

What specific popups?

Hey greg, is it possible to have multiple stacks? E.g. having 4 slots, each of them holding multiple tables and the table that requires action next popping to the front etc.
I found a post from 2013 that says it might be implemented in the future, has this been added?

No unfortunately it has not been added. It would require a major redesign to how the program is currently structured. Its still on the ideas list, and as you note has been there for a long time. IF I do a major restructure for v3.0, then perhaps this will get included. But the most important thing for me is stability, and any major change like that has the possibility to introduce bugs..

it's the one I get every time I register a hyper satty that says ''welcome to the tournament....if you win a seat in this satellite blablabla''

yeah im sure ninja has this option but I replaced ninja with SaT okay well ill have a look at what I can do. thanks

Yeah, I see. I'll try to find a workaround
Thanks either way

i see that tn has options to have multiple stacks of tables

are you any closer to making that happen for sat?

See a few posts above

ah okay fair enough

Is it possible to edit the layout coordinates manually? Without dragging and dropping. It's hard (and a bit slow) to drag and get everything exactly where I want it.

SAT is way more powerful than PlaceMint but this is something I really miss about PlaceMint. Say I have a 9 table layout and I know I want table 5 at 640 across 480 down, I just type that in. Possible?

Also when dragging and dropping, SaT 'snaps' to screen edges and also to other window edges. If you don't want that, you can hold down CTRL while dragging

You COULD edit the coords manually if you want to. Just click on File->Current Layout, and then you'll see all your settings. Look for these combinations:

You almost never want to edit these settings manually, because SaT does some checks and balances through the interface to prevent errors. But in this specific case, it will work.

is global poker supported and is there a function to click time bank? the time bank is the only reason I am using tabletamer right now.

I'm having trouble getting a response from the "tile all tables" hotkey. From my understanding of reading earlier posts, if you activate it when you have some tables stacked and some in your grid it should take all the stacked tables and add them to the grid. Is there a setting I might have enabled that can interfere with the hotkey's operation or am I misunderstanding its function? The only extra advanced options I altered are activating "allow_dragging" and "allow_movehotkeys" for keep in grid tables.

Also thank you for creating such an efficient and well documented program, it pays for itself by closing ignition popups alone lol.

I don't know what Global Poker is. What network is that? But you can always try to choose 'Other' from the Sites dropdown and go through the Custom Site Wizard

And currently there is no timebank feature. It may be added in the future

It should work as you describe. The only exception is that SaT by default will leave 1 table in the stack when you use that hotkey, in order to keep the visual grid 'full' and have no gap in the stackslot. That can be changed with the Extra Advanced Option for "stack_one_when_tileall"


Haha thank you for being a customer. I'm glad everything's working for you

I was wondering if you could make it so that "Refill grid" does not refill the slot if it is a table that I used "keep in grid" held in a specific slot I wanted it to stay. Thanks

Also, I have noticed (Stack Slot is 1 on another monitor, with slots 2-10 on other monitors) that if I have only a table in slot 4, and a table pops into slot 3, when I hit "Refill Grid" it moves slot 4 to slot 2 instead of slot 3 to slot 2, any suggestions? It would be sooooo much better if it would refill numerically, that way I don't have to move curser as much, could just hover over slot 2, and have slot 3 move to 2 after I stack it.... and so on in order. Thanks

This is a bug and will be fixed. The 'ReFill Grid' hotkey should respect the Extra Adv Option to 'allow_movehotkeys_on_keepingrid_tables' when its turned off

So there are tables in both slots 2 and 3, and slot 1 is empty. SaT attempts to move the least amount of tables, thats why it moves 3->1. You are saying that you want it to move 2->1. If that happened, then the grid would have tables in slots 1 and 3, with a gap in 2. So then SaT would have to move 3->2 as well. In which case, both tables have moved their spots in the grid. Is that what you're saying you want?

Slot 1 is my stack slot.
Grid slots look like this:
432
567

So lets say I have all tables stacked waiting for action. : action comes up on 3 tables about the same time and fill respectively in slots 432.
Now I fold+stack slot 2. Then hit "Refill Grid": What happens is 4 moves to 2.
What I want is 3 to move to 2.
So "refill grid" will move tables sequentially. Like the order they fill to begin with, this way the table with less time to act will move first too. In this scenario, I can theoretically just keep my curser over slot 2, and use hot key "refill grid" to keep feeding that slot with the next table needing action

^^^
Monitor 1
432
567

Monitor 2
1(stack slot)

Sorry I see that you had edited your post and changed the slot numbers around

In this new example, its the same issue:

Yes, if slots 3,4 are occupied, and slot 2 is free, then when you press 'refill grid', 4 will move to 2. This is because SaT attempts to move as few tables as possible. And this leaves you with slots 2,3 full with no gaps in the grid.

Instead you say you want 3 to move to 2. Ok. Then slots 2,4 will be full, and there will be a gap in slot 3 which is now empty. So in addition, 4 would have to move to 3 also, so that there is no gap. Is that what you want?

Pretty much. 2 and 4 wouldn't be full long because, when I bet/fold+stack the table that just moved to 2, I can hit refill grid, and 4 will then move to 2, the gap in 3 is brief and irrelevant. I'm thinking theoretically that this table management process will continue through the rest of slots that fill up. essentially it will be easier on eyes and cursor spending most of the time at slot 2. That would be awesome.
Another example, is if tables start popping into 5,6,7 I can be at slot 2 and use the hot key "refill grid" to the next in line to slot 2. Of course this will only be beneficial if we can get the "keep in grid" bug fixed, for hands I do want to keep in grid to monitor action.

Thanks, I think everyone would love this. It would be the pinnacle of table management.

Well what I'm saying is, "Refill grid" is supposed to eliminate all the gaps in the grid, so if I made the change, ALL gaps would be removed, in the way that I mentioned: After 3->2, then also 4->3, leaving 4 empty, and a nice neat grid (1,2,3 full)

Unless of course you had used 'keep in grid' on that table in slot 4, in which case it wouldn't move

Makes sense?

If slots 2,3,4 are empty, and 5,6,7 occupied, then with your suggestion, all of those tables would move up into 2,3,4, again leaving no gaps in the grid

Makes sense, and I do use keep in grid if I want the table in the grid, However, I don't care about gaps, the functionality I'm looking for is to move the next numerical slot table to the earliest numerical slot, with one hot key, and in most cases, it will be slot 2.

If I keep I want to monitor slot 2 I can just "keep in grid" minimally move mouse to slot 3 and do the same thing I was doing with slot 2 and so on....

So basically I'm looking for the hot key to only move one table at a time, specifically the next number into the earliest available slot ( numerically)

Also, the current "Refill Grid" is buggy, it doesn't work sometimes

v2.94

http://www.stackandtile.com/forum/sh...d=8134#pid8134

http://www.stackandtile.com/sat/

Ok I just put out v2.94 which adds a new extra advanced option. Add this line to your config:
That should do it for you



If you could tell me when it fails and when it succeeds, then I could try to figure out the problem

Thanks a lot!!!! This is working great now!